Z/A/X/DZ Common Accessories Ordering Information Terminal Covers (Sold Separately) Common to Z, A, X, and DZ Models The Terminal Cover is secured using the switchs side mounting screws and protects the casing and terminal wires from dust, vibration, or fingers, thus preventing terminal short-circuiting, ground faults, wire disconnection or improper connection, and electric shock accidents. Terminal Covers made of phenol resin have five or six thin wall sections. These sections can be torn open to provide holes for lead cables at desired points. Application Soldering terminal use Screw terminal use Remarks Material Mounting direction Model Phenol resin Side mounting AP-A AP-B --- Metal press mold Side mounting AP1-A AP1-B Used for AP-A and AP-B Vinyl chloride Side mounting AP-Z --- Note: Use the Screw-terminal use Terminal Cover for DZ-series solder terminal models. Separator (Sold Separately) Common to Z, A, X, and DZ Models Model: Separator for Z Actuators (Sold Separately) Common to Z and X Models Pin Plunger Switches might need to be actuated by a cam or similar object, in which case, use one of the following Actuators according to the application. Actuator Common to Z and X models Hinge lever ZAA-1 Hinge roller lever ZAA-2 Short ZAQ-3 Panel mount plunger Medium ZAQ-2 Long ZAQ-1 Panel mount roller plunger ZAQ-22 Note: ZAQ-22 is constructed of ferrous material. Therefore, it cannot be used with the X Switch, because of the permanent magnet contained within those models. Use the ZAQ-22 external panel mount roller plunger only with the Z or DZ switch. Z/A/X/DZ Common Accessories 177Dimensions Note: Unless otherwise specified, all units are in millimeters and a tolerance of 0.4 mm ( 0.8 mm for the AP-Z) applies to all dimensions. Terminal Covers 52.8 53.8 AP-A AP-B +0.2 +0.2 25.4 +0.2 +0.2 4.3 4.3 25.4 0 0 4.3 4.3 0 0 Soldering Terminal Use Screw Terminal Use (Phenol Resin) (Phenol Resin) 8 8 16.3 20.2 2.15R 2.15R 6.4 6.5 8 21 8 21 Note: The Cover has five thin, easy-to-separate Note: The Cover has six thin, easy-to-separate portions for easy lead wire connections. portions for easy lead wire connections. 54.4 55.4 AP1-A +0.2 +0.2 AP1-B 25.4 4.3 4.3 +0.2 +0.2 25.4 0 0 4.3 4.3 0 0 Soldering Terminal Use Screw Terminal Use (Metal Press Mold) 8 (Metal Press Mold) 8 17.1 21 2.15R 2.15R 7.2 7 8.5 22.6 8.5 22.6 Note: 1. The Cover has five holes for easy lead wire connections. Note: 1. The Cover has six holes for easy lead wire connections. 2. AP1-A should be used with the AP-A 2. AP1-B should be used with the AP-B Two, 4.2 dia. AP-Z Pressure plate 53 (t1 steel) Soldering or Screw Terminal Use 21 25.4 Cable Pull-out Dimension (Vinyl Chloride) 7 A-A cross-section B-B cross-section 14 15 8 dia. 13 6 dia. 21 39 46 Note: A 6-dia. or 8-dia. cable can be used by cutting the cable pull-out hole to the size of the cable to be A A used. B B 12 M3 20 Phillips screw 12 Nut (with plane washer and nut) 14 Separator SEPARATOR FOR Z Two, 4.5 dia. Note: The separators material is EAVTC (Epoxide Alkyd Varnished Tetron Cloth) and its heat-resisting 13.5 temperature is 130 C. 27 11.9 25.40.2 t = 0.38 49.20.5 178 Z/A/X/DZ Common Accessories