Special-purpose Basic Switch DZ CSM DZ DS E 2 2 DPDT Basic Switch for Two Independent Circuit Control Ideal for switching the circuits operating on two different voltages, and for controlling two independent circuits. Interchangeable with OMRON Z Basic Switches, as both switches are identical in mounting hole dimensions, mounting pitch and pin plunger position. Be sure to read Safety Precautions on page 4 and Safety Precautions for All Basic Switches. Model Number Structure Model Number Legend (1) Ratings (3) Actuator (4) Contact Form DZ-10G -1 10 : 10 A (250 VAC) None : Pin plunger 1 : DPDT (1) (2)(3) (4)(5) V : Hinge lever (2) Contact Gap (5) Terminals V22 : Short hinge roller lever G : 0.5 mm V2 : Hinge roller lever A : Solder terminal W : Hinge lever B : Screw terminal W22 : Short hinge roller lever W2 : Hinge roller lever Ordering Information Terminal Solder terminal (-1A) Screw terminal (-B) Actuator Model Model Pin plunger DZ-10G-1A DZ-10G-1B High OT DZ-10GW-1A DZ-10GW-1B Hinge lever Low OT DZ-10GV-1A DZ-10GV-1B High OT DZ-10GW22-1A DZ-10GW22-1B Short hinge roller lever Low OT DZ-10GV22-1A DZ-10GV22-1B High OT DZ-10GW2-1A DZ-10GW2-1B Hinge roller lever Low OT DZ-10GV2-1A DZ-10GV2-1B Specifications Ratings Certified Standard Ratings Ask your OMRON representative for Non-inductive load (A) Inductive load (A) information on certified models. Rated voltage Resistive load Lamp load Inductive load Motor load UL/CSA NC NO NC NO NC NO NC NO Rated voltage DZ-10G 125 VAC 10 2 1 6 3 1.5 250 VAC 10 1.5 0.7 4 2 1 125 VAC 10 A 1/8 HP 8 VDC 10 3 1.5 6 5 2.5 250 VAC 10 A 1/4 HP 14 VDC 10 3 1.5 6 5 2.5 480 VAC 2 A 30 VDC 10 3 1.5 4 3 1.5 125 VDC 0.5 A 125 VAC 0.5 0.5 0.05 0.05 250 VDC 0.25 A 250 VDC 0.25 0.25 0.03 0.03 Note: 1. The above values are for steady-state current. 2. Inductive load has a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC). 3. Lamp load has an inrush current of 10 times the steady-state current. 4. Motor load has an inrush current of 6 times the steady-state current. 5. The ratings values apply under the following test conditions: (1) Ambient temperature: 202C (2) Ambient humidity: 655%RH (3) Operating frequency: 20 operations/min Accessories (Terminal Covers, Actuators, and Separators): Refer to Z/A/X/DZ Common Accessories and Z/X/DZ Common Accessories. 1DZ Characteristics Engineering Data Mechanical Durability (DZ-10G-1B) Operating speed 0.1 mm to 1 m/s *1 10,000 Mechanical 240 operations/min Operating 7,000 Ambient temperature: 202C frequency Electrical 20 operations/min Ambient humidity: 655%RH 5,000 Without load Insulation resistance 100 M min. (at 500 VDC) Operating frequency: 240 operations/min 3,000 Contact resistance 15 m max. (initial value) 1,000 VAC, 50/60 Hz for 1 min between non-continuous terminals 1,500 VAC, 50/60 Hz for 1 min between current-carrying Dielectric strength 1,000 metal parts and non-current-carrying metal part, and between 700 current-carrying metal part and ground and between switches 500 Vibration Malfunction 10 to 55 Hz, 1.5-mm double amplitude *2 resistance 300 2 Destruction 1,000 m/s max. Shock 2 resistance Malfunction 300 m/s max. *1 *2 100 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 Mechanical 1,000,000 operations min. Durability Overtravel (mm) Electrical 500,000 operations min. Electrical Durability (DZ-10G-1B) Degree of protection IP00 1,000 Degree of protection Ambient temperature: 202C Class I 700 against electric shock Ambient humidity: 655%RH 500 Operating frequency: 20 operations/min Proof tracking index (PTI) 175 cos 1 300 Ambient operating temperature 25C to 80C (with no icing) Ambient operating humidity 35% to 85%RH 125 VAC Weight Approx. 30 to 50 g 100 *1. The values are for pin plunger models. (Contact your OMRON representative for other models.) 70 *2. Malfunction: 1 ms max. 50 250 VAC Contact Specifications 30 Material Silver alloy Contacts Gap (standard value) 0.5 mm 10 NC 30 A max. Inrush current 0 5 10 15 NO 15 A max. Switching current (A) Structure Contact Form (DPDT) COM2 NC2 NO2 COM1 NC1 NO1 Dimensions (Unit: mm) Terminals Solder Terminals (-1A) Screw Terminals (-1B) 14.5 14.5 8.2 8.2 0.1 0.1 25.4 25.4 11.9 0.2 11.9 17.450.2 17.45 49.2 49.2 23.5 16.8 23.5 16.8 COM NC NO COM NC NO COM NC NO COM NC NO Six M3 pan head screws (with toothed washer) Dimensions and Operating Characteristics The solder terminal model has a suffix-1 in its model number and its omitted dimensions are the same as the corresponding dimensions of the pin plunger model. Pin Plunger 3 dia. 2.5SR * PT 0.25 23.3 0.4 DZ-10G-1B OP 14.5 Operating force OF max. 5.59 N Release force RF min. 0.56 N 8.2 Pretravel PT max. 1.7 mm +0.075 4.2 -0.025 +0.1 4.36 dia. Overtravel OT min. 0.13 mm -0.05 +0.075 0.2 17.45 Movement Differential MD max. 0.4 mm 11.9 4.2 dia. hole -0.025 25.40.1 Operating Position OP 15.60.4 mm 49.2 * Stainless-steel pin plunger 2 4 4 Durability (x10 operations) Durability (x10 operations)