Proximity Sensor Ideal for High Temperatures and Cleaning Processes E2EH CSM E2EH DS E 6 2 Proximity Sensor Ideal for the Food and Beverage Industry SUS316L Body, IP69K Protection, Resistant to High Temperatures and Detergents Applicable to 120C Improved resistance to (with DC 3-wire detergents and rusting connection) (Heat resistance verified to 1,000 hours.) Resists typical Water resistant under detergents and high-temperature, For the most recent information on models that have been certified for high-pressure cleaning disinfectants used in safety standards, refer to your OMRON website. based on DIN 40050-9. the food industry (Pressure: 8,000 to 10,000 kPa, Water temperature: 80C, For 30 s at all angles) Be sure to read Safety Precautions on page 9. Ordering Information Sensors Refer to Dimensions on page 10. Pre-wired Models Appearance Sensing distance Output configuration Operation mode: NO Operation mode: NC DC 2-wire (polarity) E2EH-X3D1 2M E2EH-X3D2 2M DC 2-wire (no polarity) * E2EH-X3D1-T 2M --- M12 3 mm DC 3-wire (PNP) E2EH-X3B1 2M E2EH-X3B2 2M DC 3-wire (NPN) E2EH-X3C1 2M E2EH-X3C2 2M DC 2-wire (polarity) E2EH-X7D1 2M E2EH-X7D2 2M Shielded DC 2-wire (no polarity) * E2EH-X7D1-T 2M --- M18 7 mm DC 3-wire (PNP) E2EH-X7B1 2M E2EH-X7B2 2M DC 3-wire (NPN) E2EH-X7C1 2M E2EH-X7C2 2M DC 2-wire (polarity) E2EH-X12D1 2M E2EH-X12D2 2M DC 2-wire (no polarity) * E2EH-X12D1-T 2M --- M30 12 mm DC 3-wire (PNP) E2EH-X12B1 2M E2EH-X12B2 2M DC 3-wire (NPN) E2EH-X12C1 2M E2EH-X12C2 2M Connector Models (M12) Appearance Sensing distance Output configuration Operation mode: NO Operation mode: NC DC 2-wire (polarity) E2EH-X3D1-M1G E2EH-X3D2-M1G M12 DC 3-wire (PNP) E2EH-X3B1-M1 E2EH-X3B2-M1 3 mm DC 3-wire (NPN) E2EH-X3C1-M1 E2EH-X3C2-M1 DC 2-wire (polarity) E2EH-X7D1-M1G E2EH-X7D2-M1G Shielded M18 DC 3-wire (PNP) E2EH-X7B1-M1 E2EH-X7B2-M1 7 mm DC 3-wire (NPN) E2EH-X7C1-M1 E2EH-X7C2-M1 DC 2-wire (polarity) E2EH-X12D1-M1G E2EH-X12D2-M1G M30 DC 3-wire (PNP) E2EH-X12B1-M1 E2EH-X12B2-M1 12 mm DC 3-wire (NPN) E2EH-X12C1-M1 E2EH-X12C2-M1 *When using a no-polarity model, there is no need to be concerned about whether to connect to the positive or negative side of the power supply. The load can be connected to either the +V side or 0 V side. 1E2EH Accessories (Order Separately) Sensor I/O Connectors (M12, Sockets on One Cable End) (Models for Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.) Refer to XS2. Appearance Cable length Sensor I/O Connector model Applicable Proximity Sensors Straight 2 m XS2F-E421-D80-E 5 m XS2F-E421-G80-E E2EH-X D -M1G E2EH-X B -M1 E2EH-X C -M1 L-shape 2 m XS2F-E422-D80-E 5 m XS2F-E422-G80-E Note: The above Connectors conform to DIN40050-9 standard, provide IP69K protection, have a maximum operating temperature of 105C, and use SUS316L stainless steel. 2