E5CN-HR2M-500 AC100-240 Omron

Advanced Digital Temperature Controller E5CN-H (48 x 48 mm) CSM E5CN-H DS E 4 9 A New High-performance Controller: High Resolution, High Speed, and High Input Accuracy. Logic Operations and Preventive Maintenance Function. High-resolution display with 5 digits/0.01C display in a compact Controller (48 x 48 mm). High-speed sampling cycle of 60 ms. High Accuracy Thermocouple/Pt input: 0.1% of PV Analog input: 0.1% FS Universal inputs on all models (thermocouple, PT, or analog 48 48 mm input) to handle various sensors with one Controller. E5CN-H A PV/SV-status display function can be set to automatically alternate For the most recent information on models that have been certified for safety standards, refer to your OMRON website. between displaying the status of the Temperature Controller (auto/ manual, RUN/STOP, and alarms) and the PV or SV. Refer to Safety Precautions for E5 N/E5 N-H. Flexible contact outputs with logic operations (AND, OR, and delays) set from the Support Software (CX-Thermo Ver. 4.0) Refer to Operation for E5 N/ E5 N-H for operating procedures. Preventive maintenance for relays in the Temperature Controller using a Control Output ON/OFF Counter. Main I/O Functions Event Inputs E5CN-H None Two 2-level Display: PV and SV 5-digit Display with high resolution of 0.01C Universal Sensor Inputs Auto/manual switching Universal thermocouple/Pt/analog Temperature Controller status display Auxiliary Outputs (current/voltage) inputs. Simple program function Two Logic operations Control Output 2 Indication Accuracy Control output ON/OFF count alarm None Thermocouple/Pt input: 0.1% of PV Voltage output PV change rate alarm Analog input: 0.1% FS Models also available with RS-485 or (for driving SSR) RS-232C communications Sampling Period Control Output 1 60 ms Relay output Voltage output (for driving SSR) Current output Linear voltage output This data sheet is provided as a guideline for selecting products. Be sure to refer to the following user manuals for application precautions and other information required for operation before attempting to use the product. E5CN-H/E5AN-H/E5EN-H Digital Controllers User s Manual Advanced Type (Cat. No. H157) E5CN-H/E5AN-H/E5EN-H Digital Controllers Communications Manual Advanced Type (Cat. No. H159) 1E5CN-H Lineup 1 control output 2 auxiliary outputs E5CN-H Terminal block Fully universal input Advanced Type 2 control outputs 2 auxiliary outputs Note: Models with one control output and models with two control outputs can be used for heating/cooling control. Model Number Structure Model Number Legend Controllers Option Units E53- E5CN- M - -500 1 2345 6 7 1 234 1. Type 1. Applicable Controller H: Advanced CN: E5CN-H or E5CN 2. Control Output 1 2. Function 1 R: Relay output Blank: None Q: Voltage output (for driving SSR) Q: Control output 2 (voltage output for driving SSR) C: Current output P: Power supply for sensor V: Linear voltage output C: Current output 3. Auxiliary Outputs 3. Function 2 2: Two outputs Blank: None H: Heater burnout/SSR failure/Heater overcurrent detection (CT1) 4. Option 1 HH: Heater burnout/SSR failure/Heater overcurrent detection M: Option Unit can be mounted. (CT2) B: Two event inputs 5. Power Supply Voltage 03: RS-485 communications Blank: 100 to 240 VAC H03: Heater burnout/SSR failure/Heater overcurrent detection D: 24 VAC/VDC (CT1) + RS-485 communications 6. Case Color HB: Heater burnout/SSR failure/Heater overcurrent detection Blank: Black (CT1) + Two event inputs W: Silver HH03: Heater burnout/SSR failure/Heater overcurrent detection 7. Terminal Cover (CT2) + RS-485 communications H01: Heater burnout/SSR failure/Heater overcurrent detection -500: With terminal cover (CT1)/RS-232C communications F: Transfer output BF: Two event inputs/Transfer output 4. Version N2: Available only to models released after January 2008 Note: Not all combinations of function 1 and function 2 specifications are possible for Option Units (E53- ). 2