EE-1003A Omron

Slot-type Reflective Photomicrosensor EE-SPX301/401 EE-SPY30/40 CSM EE-SPX301 401 EE-SPY30 40 DS E 4 2 Photomicrosensor with light modulation is not influenced by external light. Voltage-output models with wide operating voltage range (5 to 24 VDC). Fitted with an easy-to-adjust optical axis mark. Easy adjustment and optical axis monitoring with a light indicator. For the most recent information on models that have been certified for Be sure to read Safety Precautions on safety standards, refer to your OMRON website. page 5. Ordering Information Sensors Infrared light Output Appearance Sensing method Sensing distance Output type Model configuration Dark-ON EE-SPX301 Through-beam type 3.6 mm (slot width) (with slot) Light-ON EE-SPX401 Horizontal type Dark-ON EE-SPY301 NPN Reflective type 5 mm output Light-ON EE-SPY401 Vertical type Dark-ON EE-SPY302 Reflective type 5 mm Light-ON EE-SPY402 Accessories (Order Separately) Type Cable length Model Remarks EE-1002 Connector Connector with Cable 1 m EE-1003 NPN/PNP Conversion Connector 0.46 m (total length) EE-2001 Connector Hold-down Clip EE-1003A For EE-1003 only. * Refer to Accessories for details. 1EE-SPX301/401 EE-SPY30/40 Ratings and Specifications Sensing method Through-beam type (with slot) Reflective type EE-SPY301, EE-SPY401 EE-SPX301, EE-SPX401 Item Models EE-SPY302, EE-SPY402 5 mm (Reflection factor: 90% white paper Sensing distance 3.6 mm (slot width) 15 15 mm) *1 Sensing object Opaque: 1 0.5 mm min. --- 0.2 mm max. Differential distance 0.05 mm max. (with a sensing distance of 3 mm, horizontally) Light source GaAs infrared LED with a peak wavelength of 940 nm Indicator *2 Light indicator (red) Supply voltage 5 to 24 VDC 10%, ripple (p-p): 5% max. Current consumption Average: 15 mA max., Peak: 50 mA max. NPN voltage output: Load power supply voltage: 5 to 24 VDC Load current: 80 mA max. Control output OFF current: 0.5 mA max. 80 mA load current with a residual voltage of 1.0 V max. 10 mA load current with a residual voltage of 0.4 V max. Response frequency *3 500 Hz min. 100 Hz min. Ambient illumination 3,000 lx max. with incandescent light or sunlight on the surface of the receiver Operating: 10 to +55C Ambient temperature range Storage: 25 to +65C (with no icing) Operating: 5% to 85% Ambient humidity range Storage: 5% to 95% (with no condensation) Vibration resistance Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 h each in X, Y, and Z directions 2 Shock resistance Destruction: 500 m/s for 3 times each in X, Y, and Z directions Degree of protection IEC IP50 Connecting method Special connector (soldering not possible) Weight Approx. 2.6 g Material Case Polycarbonate *1. Operation may not be possible near the Sensor. *2. The indicator is a GaP red LED (peak wavelength: 700 nm). *3. The response frequency was measured by detecting the following rotating disk. 200 mm EE-SPX301 EE-SPY30 dia. EE-SPX401 Disk EE-SPY40 15 mm 15 mm 15 mm 2 mm 2 mm 2 mm Disk Disk 2