EE-SPZ301A Omron

Retroreflective Photomicrosensor with Lens EE-SPZ-A CSM EE-SPZ-A DS E 5 2 Photomicrosensor with light modulation for reduced external light interference. Easy adjustment and optical axis monitoring with a light indicator. Wide operating voltage range: 5 to 24 VDC Supports connection with Programmable Controllers (PLCs). Easy-to-wire connectors assure easy maintenance. For the most recent information on models that have been certified for Be sure to read Safety Precautions on safety standards, refer to your OMRON website. page 3. Ordering Information Sensors Infrared light Sensing Output Appearance Sensing distance Output type Model method configuration Dark-ON EE-SPZ301-A Retroreflective NPN output 200 mm type Light-ON EE-SPZ401-A Accessories (Order Separately) Type Cable length Model Remarks Connector EE-1002 Connector with Cable 1 m EE-1003 NPN/PNP Conversion Connector 0.46 m (total length) EE-2001 Connector Hold-down Clip EE-1003A For EE-1003 only. Reflector E39-R1 * Refer to Accessories for details. * Refer to the E39-L/E39-S/E39-R Datasheet for information on Reflectors. 1EE-SPZ-A Ratings and Specifications Item Models EE-SPZ301-A, EE-SPZ401-A Sensing distance *1 200 mm (using E39-R1 reflector) GaAs infrared LED (pulse lighting) with a peak wavelength of Light source 940 nm Indicator *2 Light indicator (red) Supply voltage 5 to 24 VDC 10%, ripple (p-p): 5% max. Current consumption Average: 15 mA max., Peak: 50 mA max. NPN voltage output Load power supply voltage: 5 to 24 VDC Load current: 80 mA max. Control output OFF current: 0.5 mA max. 80 mA load current with a residual voltage of 1.0 V max. 10 mA load current with a residual voltage of 0.4 V max. Response frequency *3 100 Hz min. *1. Operation may not be possible near the sensor. 3,000 lx max. with incandescent light or sunlight on the surface Ambient illumination *2. The indicator is a GaP red LED of the receiver (peak wavelength: 700 nm). *3. The response frequency was measured by Operating: 10 to +55C Ambient temperature range detecting the following rotating disk. Storage: 25 to +65C Reflector 200 mm Operating: 5% to 85% dia. Ambient humidity range Storage: 5% to 95% Disk Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 h Vibration resistance each in X, Y, and Z directions 60 mm 60 mm 2 Shock resistance Destruction: 500 m/s for 3 times each in X, Y, and Z directions 40 mm Degree of protection IEC IP50 Connecting method Special connector (soldering not possible) Weight (packaged) Approx. 3 g Case Material Polycarbonate Lens Engineering Data (Reference Value) Receiver Output Excess Gain vs. Sensing Distance Characteristics EE-SPZ301-A + E39-R1 Reflector EE-SPZ401-A 20 Ta = 25C Vcc = 5 V 18 Reflector 16 E39-R1 14 12 10 White paper 8 (reflection factor: 90%) 6 Operating level 4 2 0 50 100 150 200 250 300 350 400 Distance d (mm) 2 Receiver output (mV)