Sensing Band F03-16PT CSM F03-16PT DS E 1 4 Compared to the F03-16PE (polyethylene), the F03-16PT has higher resistance to both high temperatures and chemicals. Small holes enable the detection of leakage even when installed upside down. Indicates models that allow free cutting. Ordering Information Specifications Name Model Sheath PTFE fluoroplastic Fluoroplastic 1 m F03-16PT 1M Core SUS316 stainless steel Sensing Band 2 m F03-16PT 2M Ambient operating temperature 50 to 200C 5 m F03-16PT 5M Weight Approx. 16 g (1 m) 10 m F03-16PT 10M 15 m F03-16PT 15M 20 m F03-16PT 20M Fluoroplastic Sensing Band Stickers F03-26PTN * Note: 1. Specify the cable length for F03-16PT from the list above. 2. The cables can be cut. * 10 Stickers per set Dimensions (Unit: mm) Sensing Band Appearance Structure 1.7 10 1.2 5 2.7 19/0.12 0.6t SUS316 Materials: Electrodes: SUS316 stainless steel, Sheath: Fluoroplastic Sensing Band Stickers F03-26PTN (screws) Appearance Structure 25 3.0 12 Two, 3.5 dia. 15 Material: Fluoroplastic PFA Note: The shape of the adhesive tape shown above is for securing the F03-16PE. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. In the interest of product improvement, specifications are subject to change without notice. 1Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omrons exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omrons sole obligation hereunder shall be, at Omrons election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omrons analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See