PCB Relay G2RL Next-generation PCB Relay Available in 24 Models Low profile: 15.7 mm max. in height Conforms to VDE (EN61810-1), UL508 and CSA22.2. Meets EN60335-1 requirements for household products. Clearance and creepage distance: 10 mm/10 mm. Tracking resistance: CTI>250 (Both standard and class F type) Coil Insulation system: Class F (UL1446) VDE RC High sensitivity: 400 mW Refer to pages 16 to 17 for details. RoHS Compliant Ordering Information Classification Enclosure Contact form ratings SPST-NO SPDT DPST-NO DPDT Standard General-purpose Flux protection G2RL-1A G2RL-1 G2RL-2A G2RL-2 Fully sealed G2RL-1A4 G2RL-14 G2RL-2A4 G2RL-24 High-capacity Flux protection G2RL-1A-E G2RL-1-E --- --- Fully sealed G2RL-1A4-E G2RL-14-E --- --- Note: When ordering, add the rated coil voltage to the model number. Example: G2RL-1A 12 VDC Rated coil voltage Model Number Legend G2RL- - - 1 23 4 5 1. Number of Poles 4. Classification 1: 1 pole None: General purpose 2: 2 poles E: High capacity (1 pole) 2. Contact Form 5. Approved Standards None: PDT None: UL, CSA, VDE, UL Class B Insulation A: PST-NO 3. Enclosure Ratings None: Flux protection 4: Fully sealed 224G2RL G2RL Specifications Coil Ratings Rated voltage 5 VDC 12 VDC 24 VDC 48 VDC Rated current 80.0 mA 33.3 mA 16.7 mA 8.96 mA Coil resistance 62.5 360 1,440 5,358 Must operate voltage 70% max. of the rated voltage Must release voltage 10% min. of the rated voltage Max. voltage 180% of rated voltage (at 23C) Power consumption Approx. 400 mW Approx. 430 mW Note: The rated current and coil resistance are measured at a coil temperature of 23C with a tolerance of 10%. Contact Ratings Number of poles 1 pole 2 poles Contact material AgSnO AgNi 2 Load Resistive load (cos=1) Resistive load (cos=1) Rated load 12 A (16 A) at 250 VAC 8 A at 250 VAC 12 A (16 A) at 24 VDC 8 A at 30 VDC (See note 2.) (See note 2.) Rated carry current 12 A (16 A) 8 A (70C)/5 A (85C) (See note 2.) (See note 2.) Max. switching voltage 440 VAC, 300 VDC Max. switching current 12 A (16 A) 8 A Max. switching power 3,000 VA (4,000 VA) 2,000 VA Note: 1. Values in parentheses are those for the high-capacity model. 2. Contact your OMRON representative for the ratings on fully sealed models. Characteristics Item 1 pole 2 poles Contact resistance 100 m max. Operate (set) time 15 ms max. (Approx. 7 ms typical) Release (reset) time 5 ms max. (Approx. 2 ms typical) Max. operating frequency Mechanical:18,000 operation/hr Electrical:1,800 operation/hr at rated load Insulation resistance 1,000 M min. (at 500 VDC) Dielectric strength 5,000 VAC, 1 min between coil and contacts 5,000 VAC, 1 min between coil and contacts 1,000 VAC, 1 min between contacts of same polar- 2,500 VAC, 1 min between contacts of different ity polarity 1,000 VAC, 1 min between contacts of same polar- ity Impulse withstand voltage 10 kV (1.250 s) between coil and contact Vibration resistance Destruction: 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude) Malfunction: 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude) 2 Shock resistance Destruction: 1,000 m/s 2 Malfunction: Energized: 100 m/s 2 Not energized: 100 m/s Endurance (Mechanical) 20,000,000 operations (at 18,000 operations/hr) Ambient temperature Operating: 40C to 85C (with no icing) Storage: 40C to 85C (with no icing) Ambient humidity 5% to 85% Weight Approx. 12 g Note: Values in the above table are the initial values. Approved Standards UL508 (File No. E41643) Model Contact form Coil ratings Contact ratings G2RL-1A SPST-NO 3 to 48 VDC 12 A at 250 VAC (General use) 12 A at 24 VDC (Resistive) G2RL-1 SPDT G2RL-1A-E SPST-NO (High capacity) 16 A at 250 VAC (General use) 16 A at 24 VDC (Resistive) G2RL-1-E SPDT (High capacity) G2RL-2A DPST-NO 8 A at 277 VAC (General use) 8 A at 30 VDC (Resistive) G2RL-2 DPDT 225