G3FM-2R5SLN-DC24 Omron

6 Solid State Relays G3FM CSM G3FM DS E 5 3 100-A-max. Leakage Current, No Bleeder Resistor Required Reduces wiring work by 60% when combined with the PFY-08- PU Push-In Plus Socket (according to actual OMRON measure- ments). 1 mA to 500 mA micro-load switching. Switch to both AC and DC with no polarity. Switch for a wide range of voltages 19.2 to 264 VAC, 19.2 to 125 VDC. Switch full- and half-wave rectifier AC loads. Same sizes and terminal arrangements as OMRON Power Relay MY Series. Note: The socket is optional. Switch MY Series (without bleeder resistor). Superior surge absorption with a built-in varistor. Optimum SSR to control minute load, valves, and solenoids. Refer to Safety Precautions for All Solid State Relays. Model Number Structure Model Number Legend G3FM- 12345 1. Basic Model Name G3FM: Solid State Relay 2. Rated Load Power Supply Voltage 2: 200 VAC 3. Rated Load Current R5: 0.5 A 4. Terminal Type S: Plug-in terminals 5. Zero Cross Function L: Not equipped with zero cross function 6. Operation Indicator N: Equipped with operation indicator Ordering Information List of Models Isolation Zero cross Indicator Rated output load Rated input voltage Model function Photo-voltage coupler No Yes 0.5 A at 24 to 240 VAC 5 VDC G3FM-2R5SLN 0.5 A at 24 to 110 VDC 12 VDC 24 VDC Note: When ordering, specify the rated input voltage. 1G3FM Accessories (Order Separately) Connection Sockets Classification Terminal type Appearance Model Front-mounting Screw terminals PYF08A-E (finger protection structure) Screw terminals PYF08A-N (finger protection structure) Screw terminals PYF08A Push-In Plus terminal blocks PYF-08-PU (Socket combination) Back-mounting Relays with PCB Terminals PY08-02 Refer to Common Socket and DIN Track Products for details on Connection Sockets and DIN Track products (sold separately) of your OMRON website. Refer to PYF -PU/P2RF- -PU for details on A Push-In Plus Terminal Block Socket of your OMRON website. Hold-down Clips Applicable Socket Hold-down Clips Classification Terminal type Model Model * For front-mounting Screw terminals (finger protection structure) PYF08A-E and PYF08A-N PYC-A1 Screw terminals PYF08A For back-mounting Relays with PCB Terminals PY08-02 PYC-P * PYC-A1 is provided with two clips. DIN Track Mounting Parts Classification/ Type Appearance Model division For front-mounting DIN Tracks Shallow type, total length: 1 m PFP-100N Shallow type, total length: 0.5 m PFP-50N Deep type, total length: 1 m PFP-100N2 End Plate PFP-M Spacer PFP-S 2