MOS FET Relays
G3VM-2(F)L
Analog-switching MOS FET Relays with 350-V
Load Voltage and Current Limit.
A 4-pin Relay available with the same terminal-pin position
as 4-pin photocouplers.
Approved standards: UL1577 (File No. E80555)
RoHS Compliant.
Application Examples
Electronic automatic exchange systems
Cordless telephones Note: The actual product is marked differently from the image shown
here.
Multi-functional telephones
Measurement devices
List of Models
Load voltage Number per Number per
Contact form Terminals Model Current limit
(peak value) stick tape
SPST-NO PCB terminals 350 VAC G3VM-2L Yes 100 ---
Surface-mounting G3VM-2FL
terminals
G3VM-2FL(TR) --- 1,500
Dimensions
Note: All units are in millimeters unless otherwise indicated.
G3VM-2L 0.25 G3VM-2FL
4.58 4.580.25
6.40.25
0.25
6.4
0.25
7.62
0.25
7.62
0.80.25
+0.15
3.65 +0.15 +0.25
0.25
3.65 4.0
0.25 0.2
1.0
+0.1
0.25
0.05 min.
0.15
Note: The actual product Note: The actual product 1.2
1.0 min.
1.20.15
is marked different- 2.5 min. is marked different-
10.0 max.
0.50.1 7.85 to 8.80 0.25
ly from the image ly from the image 2.54
shown here. 0.25 shown here.
2.54 Weight: 0.26 g
Weight: 0.26 g
Terminal Arrangement/Internal Connections (Top View)
G3VM-2L G3VM-2FL
43
43
12 12
PCB Dimensions (Bottom View) Actual Mounting Pad Dimensions
(Recommended Value, Top View)
G3VM-2L Four 0.8-dia. holes
2.54
G3VM-2FL
(0.56) 2.54
2.54
8.3 to 8.8
(0.56)
1.3
(0.1)
(0.1)
1.5
MOS FET Relays G3VM-2(F)L 31 Absolute Maximum Ratings (Ta = 25C)
Item Symbol Rating Unit Measurement conditions
LED forward current I 50 mA
F Note: 1. The dielectric strength between the input and
output was checked by applying voltage be-
Repetitive peak LED forward
I 1 A 100 s pulses, 100 pps
tween all pins as a group on the LED side and
FP
current
all pins as a group on the light-receiving side.
Input LED forward current reduction
I /C 0.5 mA/CTa 25C
F
rate
LED reverse voltage V 6V
R
Connection temperature T 125 C
j
Load voltage (AC peak/DC) V 350 V
OFF
Continuous load current I 120 mA
O
Output
ON current reduction rate I /C 1.2 mA/CTa 25C
ON
Connection temperature T 125 C
j
Dielectric strength between input and
V 2,500 V AC for 1 min
I-O rms
output (See note 1.)
Operating temperature T 40 to +85 C With no icing or condensation
a
Storage temperature T 55 to +125 C With no icing or condensation
stg
Soldering temperature (10 s) --- 260 C 10 s
Electrical Characteristics (Ta = 25C)
Mini- Maxi- Measurement
Item Symbol Typical Unit
mum mum conditions
Input LED forward voltage V 1.0 1.15 1.3 V I = 10 mA
Note: 2. Turn-ON and Turn-OFF
F F
Times
Reverse current I --- --- 10 AV = 6 V
R R
1 4
Load
Capacity between terminals C --- 30 --- pF V = 0, f = 1 MHz
T
AC/DC
2 3
Trigger LED forward current I --- 1 3 mA I = 120 mA
FT O
IF
1 4 RL
Output Maximum resistance with output ON R --- 22 35 I = 5 mA,
VDD
ON F
I = 120 mA VOUT
O
2 3
Current leakage when the relay is open I --- 0.0005 1.0 AV = 350 V
LEAK OFF
Capacity between terminals C --- 40 --- pF V = 0, f = 1MHz
OFF
IF
Limit current I 150 --- 300 mA I = 5 mA, V = 5 V,
LIM F DD
t = 5 ms
90%
Capacity between I/O terminals C --- 0.8 --- pF f = 1 MHz, V = 0 V VOUT
I-O s
10%
t ON t OFF
Insulation resistance R 1,000 --- --- M V = 500 VDC,
I-O I-O
R 60%
oH
Turn-ON time t --- 0.25 1.0 ms I = 5 mA, R = 200 ,
ON F L
V = 20 V (See note 2.)
DD
Turn-OFF time t --- 0.15 1.0 ms
OFF
Recommended Operating Conditions
Use the G3VM under the following conditions so that the Relay will operate properly.
Item Symbol Minimum Typical Maximum Unit
Load voltage (AC peak/DC) V --- --- 280 V
DD
Operating LED forward current I 57.5 25 mA
F
Continuous load current (AC peak/DC) I --- --- 100 mA
O
Operating temperature T 20 --- 65 C
a
32 MOS FET Relays G3VM-2(F)L