G3VM-61LR(TR05) Omron

228 MOS FET Relays G3VM-61LR SSOP Package MOS FET Relay with Low Leakage Current, Output Capacitance and ON Resistance (C R = 20 pF) in a 60-V Load Voltage Model. ON resistance of 1 (typical) suppresses output signal attenuation. Leakage current of 0.04 nA (typ.) when relay is open RoHS compliant Application Examples Semiconductor inspection tools Measurement devices and Data loggers Note: The actual product is marked differently from the image shown here. Broadband systems List of Models Contact form Terminals Load voltage (peak value) Model Number per tape SPST-NO Surface-mounting 60 VAC G3VM-61LR --- terminals G3VM-61LR(TR05) 500 G3VM-61LR(TR) 1,500 Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-61LR 4.2 1.9 1.4 dia 3.65 0.15 Note: A tolerance of 0.1 mm applies to 1.8 all dimensions unless otherwise specified. 0.3 0.2 1.27 3.8 Note: The actual product is marked differently Weight: 0.03 g from the image shown here. 2.04 0.2 0.46 Terminal Arrangement/Internal Connections (Top View) G3VM-61LR 43 12 Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-61LR 0.95 3.73 0.8 1.27 MOS FET Relays G3VM-61LR 271 Absolute Maximum Ratings (Ta = 25C) Item Symbol Rating Unit Measurement Conditions Input LED forward current I 50 mA Note: 1. The dielectric strength be- F tween the input and out- LED forward current I /C 0.5 mA/CT 25C put was checked by F a reduction rate applying voltage between all pins as a group on the LED reverse voltage V 5V R LED side and all pins as a group on the light-receiv- Connection temperature T 125 C j ing side. Output Load voltage (AC peak/DC) V 60 V OFF Continuous load current I 400 mA O ON current reduction rate I /C 4.0 mA/CT 25C ON a Connection temperature T 125 C j Dielectric strength between input and V 1,500 V AC for 1 min I-O rms output (See note 1.) Ambient operating temperature T 20 to +85 C With no icing or condensation a Storage temperature T 40 to +125 C With no icing or condensation stg Soldering temperature --- 260 C10 s Electrical Characteristics (Ta = 25C) Mini- Maxi- Measurement Item Symbol Typical Unit mum mum conditions Input LED forward voltage V 1.0 1.15 1.3 V I = 10 mA F F Note: 2. Turn-ON and Turn-OFF Times Reverse current I --- --- 10 AV = 5 V R R IF 1 4 RL Capacity between terminals C --- 15 --- pF V = 0, f = 1 MHz VDD T VOUT 2 3 Trigger LED forward current I --- 2 5 mA I = 100 mA, FT O R < 1.5 ON Output Maximum resistance with output ON R --- 1.0 1.5 I = 5 mA, I = 400 mA ON F O IF Current leakage when the relay is open I --- 0.04 1,000 nA V = 60 V, T = 25C LEAK OFF a Capacity between terminals C --- 20 --- pF V = 0, f = 100 MHz, OFF 90% VOUT t = < 1 s 10% t ON t OFF Capacity between I/O terminals C --- 0.3 --- pF f = 1 MHz, V = 0 V I-O s Insulation resistance between I/O terminals R 1,000 --- --- M V = 500 VDC, I-O I-O R 60% oH Turn-ON time t --- 0.3 1 ms I = 5 mA, R = 200 , ON F L V = 20 V (See note 2.) DD Turn-OFF time t --- 0.2 1 ms OFF Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Unit Load voltage (AC peak/DC) V --- --- 48 V DD Operating LED forward current I 10 --- 20 mA F Continuous load current (AC peak/DC) I --- --- 400 mA O Operating temperature T 20 --- 70 C a 272 MOS FET Relays G3VM-61LR