MOS FET Relays G3VM-61PR Smallest Class in market, USOP Package MOS FET Relays (C OFF (typical): 20 pF, R (typical): 1 ) with ON Low Output Capacitance and ON Resistance (C R = 20 pF) in a 60-V Load Voltage Model. ON resistance of 1 (typical) suppresses output signal attenuation. Note: The actual product is marked differently from the image shown here. RoHS compliant Application Examples Semiconductor inspection tools Measurement devices Broadband systems Data loggers List of Models (Ask your OMRON representative for delivery times.) Contact form Terminals Load voltage (peak value) Model Minimum packaging unit (See note) Number per tape SPST-NO Surface-mounting 60 V G3VM-61PR --- terminals G3VM-61PR(TR) 1,500 Note: 1. Ask your OMRON representative for orders under 1,500 pcs. 2. Tape-cut USOPs are packaged without humidity resistance. Use manual soldering to mount them. Refer to common precautions. 3. The AC peak and DC value is given for the load voltages. Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-61PR 3.25 2.05 Note: A tolerance of 0.2 mm applies 0.15 1.65 to all dimensions unless other- wise specified. (0.4) 0.2 Note: The actual product is marked differently 1.27 2.85 Weight: 0.03 g from the image shown here. 2.2 (0.35) Terminal Arrangement/Internal Connections (Top View) G3VM-61PR 43 The actual product is marked differently from the image shown here. Beveled side is input side. 1 Pin 1 2 Pin 1 Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-61PR 0.85 2.9 0.8 1.27G3VM-61PR G3VM-61PR Absolute Maximum Ratings (Ta = 25C) Item Symbol Rating Unit Measurement Conditions Note: 1. The dielectric strength be- Input LED forward current I 50 mA F tween the input and out- LED forward current reduction rate I /C 0.5 mA/CTa 25C F put was checked by applying voltage between LED reverse voltage V 5V R all pins as a group on the Connection temperature T 125 C LED side and all pins as a j group on the light-receiv- Output Load voltage (AC peak / DC) V 60 V OFF ing side. Continuous load current (AC peak / DC) I 400 mA O ON current reduction rate I /C 4.0 mA/CTa 25C O Connection temperature T 125 C j Dielectric strength between input and V 500 Vrms AC for 1 min I-O output (See note 1.) Ambient operating temperature T 40 to +85 C With no icing or condensation a Storage temperature T 40 to +125 C With no icing or condensation stg Soldering temperature --- 260 C10 s Electrical Characteristics (Ta = 25C) Item Symbol Mini- Typical Maxi- Unit Measurement mum mum conditions Note: 2. Turn-ON and Turn-OFF Input LED forward voltage V 1.0 1.15 1.3 V I = 10 mA F F Times Reverse current I --- --- 10 AV = 5 V R R IF 1 4 RL Capacity between terminals C --- 15 --- pF V = 0, f = 1 MHz T VDD VOUT Trigger LED forward current I --- 0.5 3 mA I = 100 mA FT O 2 3 Output Maximum resistance with output ON R --- 1.0 1.5 I = 5 mA, I = 400 mA, ON F O t < 1 s Current leakage when the relay is open I --- --- 1 nA V = 60 V, Ta = 25C LEAK OFF IF Capacity between terminals C --- 20 30 pF V = 0, f = 1 MHz, OFF t < 1 s Capacity between I/O terminals C --- 0.3 --- pF f = 1 MHz, Vs = 0 V I-O 90% VOUT 10% Insulation resistance between I/O terminals R 1,000 --- --- M V = 500 VDC, I-O I-O t ON t OFF RoH 60% Turn-ON time tON --- 0.3 0.5 ms I = 5 mA, R = 200 , F L V = 20 V (See note 2.) DD Turn-OFF time tOFF --- 0.3 0.5 ms Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Unit Load voltage (AC peak / DC) V --- --- 48 V DD Operating LED forward current I 57.5 20 mA F Continuous load current (AC peak / DC) I --- --- 400 mA O Operating temperature T 20 --- 65 C a Engineering Data Safety Precautions Refer to Common Precautions for all G3VM models. Load Current vs. Ambient Temperature G3VM-61PR 500 400 300 200 100 0 20 0 20 40 60 80 100 Ambient temperature (C) Load current (mA)