New Product News DC Power Relays G9EN-1 DC Power Relays that Enable DC Load Interruption at High Voltage and Current Enable downsizing, weight saving, and non-polarization in the main contact circuit (contact terminal) by using proprietary design of the contact block. Contributes to improvements in the ease of wiring and mounting, and error-proofing against faulty wiring. Class smallest: H50 mm W28 mm L40 mm Class lightest: approx. 140 g. Accomplished half-size reduction in volume and weight when compared to Omron s same class product (400 VDC, 60 A). * *Omrons internal investigation of August 2012 RoHS Compliant Refer to the Precautions on page 4. Model Number Structure 1. Number of Poles 3. Coil Terminals G9EN1- - - - 1: 1pole Blank: Lead wire output 1 2 3 4 2. Contact Form 4. Special Functions Blank: SPST-NO Ordering Information Terminals Models Contact form Rated coil voltage Model Coil terminals Contact terminals Switching/current conduction models Lead wire Screw terminals SPST-NO 12 VDC G9EN-1 Note: Two M5 screws are provided for the contact terminal connection. Ratings Coil Rated voltage Rated current Coil resistance Must-operate voltage Must-release voltage Maximum voltage(See note 3) Power consumption 57.5% max. of rated 130% of rated voltage 12 VDC 417 mA 28.8 5% min. of rated voltage Approx. 5 W voltage (at 23C within 10 minutes) Note: 1. The figures for the rated current and coil resistance are for a coil temperature of 23C and have a tolerance of 10%. Note: 2. The figures for the operating characteristics are for a coil temperature of 23C. Note: 3. The figure for the maximum voltage is the maximum voltage that can be applied to the relay coil. Contacts Item Resistive load Rated load 60 A at 400 VDC Rated carry current 60 A Maximum switching voltage 400 V Maximum switching current 60 A 1G9EN-1 DC Power Relays Characteristics Item G9EN-1 Contact voltage drop 0.1 V max. (for a carry current of 60 A) Operate time 40 ms max. Release time 20 ms max. Between coil and contacts 1,000 M min. Insulation resistance *1 Between contacts of the same polarity 1,000 M min. Between coil and contacts 2,500 VAC 1 min Dielectric strength Between contacts of the same polarity 2,500 VAC 1 min Inpulse withstand voltage *2 4,500 V 2 Destruction 5 to 200 to 5Hz, Acceleration: 44.1 m/s Vibration resistance 2 Malfunction 5 to 200 to 5Hz, Acceleration: 44.1 m/s 2 Destruction 490 m/s 2 Shock resistance Energized 490 m/s Malfunction 2 Deenergized 98 m/s Mechanical endurance *3 200,000 min. Electrical endurance *4 400 VDC, 60 A, 3,000 ops. min. Short-time carry current 100 A (8 min) Maximum interruption current 500 A at 400 VDC (3 times) Overload interruption 250 A at 400 VDC (200 times min.) Ambient operating temperature -40 to 85C (with no icing or condensation) Ambient operating humidity 5% to 85% Weight Approx. 140 g Note: The above values are initial values at an ambient temperature of 23C unless otherwise specified. *1. The insulation resistance was measured with a 500-VDC megohmmeter. *2. The impulse withstand voltage was measured with a JEC-212 (1981) standard impulse voltage waveform (1.2 50 s). *3. The mechanical endurance was measured at a switching frequency of 3,600 operations/hr. *4. The electrical endurance was measured at a switching frequency of 60 operations/hr. Engineering Data Maximum Switching Capacity Electrical Endurance Electrical Endurance (Switching Performance) (Interruption Performance) 1,000 10 1,000 5 500 500 3 300 300 1 0.5 100 100 0.3 50 50 0.1 30 30 0.05 0.03 10 10 0.01 5 5 0.005 3 3 0.003 1 1 0.001 10 30 50 100 300 500 1,000 10 30 50 100 300 500 1,000 10 30 50 100 300 500 1,000 Switching voltage (V) Switching current (A) Switching current (A) Carry Current vs Energizing Time Must-operate Voltage and Must- Time Characteristic Distributions release Voltage Distributions (Number of Contacts Time(ms)) (Number of Relays Percentage of Rated Voltage) 30 30 100,000 Must-operate Voltage Operate time Must-release Voltage Release time 25 25 10,000 20 20 1,000 15 15 100 10 10 10 5 5 1 0 20 40 60 80 100 0 3 6 9 12 15 10 30 50 100 300 500 1,000 Percentage of rated voltage (%) Time (ms) Carry current (A) 2 Switching current (A) Energizing time (s) Operations (10,000) Number of Relays Operations Number of Contacts