H3CR-HRLAC200-240M Omron

Solid-state Power OFF-delay Timers H3CR-H CSM H3CR-H DS E 1 2 DIN 48 48-mm Power OFF-delay Timer Long power OFF-delay times S-series: up to 12 seconds, M-series: up to 12 minutes. Models with forced-reset input are available. 11-pin and 8-pin models are available. Model Number Structure Model Number Legend Note: This model number legend includes combinations that are not available. Before ordering, please check the List of Models on page 1 for availability. H3CR - H L 1 23 4 56 1. Classification 3. Input 5. Supply Voltage 6. Time Range H: Power OFF-delay timer 100-120AC: 100 to 120 VAC S: 0.05 to 12 s None: Without reset input R: With reset input 200-240AC: 200 to 240 VAC M: 0.05 to 12 min 2. Configuration 48DC: 48 VDC 4. Dimensions None: 11-pin socket 100-125DC: 100 to 125 VDC 8: 8-pin socket L: Long-body model List of Models Input Output Supply voltage S-series M-series 11-pin models 8-pin models 11-pin models 8-pin models Without DPDT 100 to 120 VAC --- H3CR-H8L 100-120AC S --- H3CR-H8L 100-120AC M reset 200 to 240 VAC H3CR-H8L 200-240AC S H3CR-H8L 200-240AC M input 24 VAC/DC H3CR-H8L 24AC/DC S H3CR-H8L 24AC/DC M 48 VDC H3CR-H8L 48DC S H3CR-H8L 48DC M 100 to 125 VDC H3CR-H8L 100-125DC S H3CR-H8L 100-125DC M With 100 to 120 VAC H3CR-HRL 100-120AC S --- H3CR-HRL 100-120AC M --- reset 200 to 240 VAC H3CR-HRL 200-240AC S H3CR-HRL 200-240AC M input 24 VAC/DC H3CR-HRL 24AC/DC S H3CR-HRL 24AC/DC M 48 VDC H3CR-HRL 48DC S H3CR-HRL 48DC M 100 to 125 VDC H3CR-HRL 100-125DC S H3CR-HRL 100-125DC M SPDT 100 to 120 VAC --- H3CR-H8RL 100-120AC S --- H3CR-H8RL 100-120AC M 200 to 240 VAC H3CR-H8RL 200-240AC S H3CR-H8RL 200-240AC M 24 VAC/DC H3CR-H8RL 24AC/DC S H3CR-H8RL 24AC/DC M 48 VDC H3CR-H8RL 48DC S H3CR-H8RL 48DC M 100 to 125 VDC H3CR-H8RL 100-125DC S H3CR-H8RL 100-125DC M Note: Specify the model number, supply voltage, and time range (S or M) when ordering. Example: H3CR-H8L 100-120AC S Time range Supply voltage 1H3CR-H Accessories (Order Separately) Name/specifications Models Flush Mounting Adapter Y92F-30 Y92F-70 Y92F-71 Mounting Track 50 cm (l) 7.3 mm (t) PFP-50N 1 m (l) 7.3 mm (t) PFP-100N 1 m (l) 16 mm (t) PFP-100N2 End Plate PFP-M Spacer PFP-S Protective Cover Y92A-48B Track Mounting/ 8-pin P2CF-08 Front Connecting Socket 8-pin, finger safe type P2CF-08-E 11-pin P2CF-11 11-pin, finger safe type P2CF-11-E Back Connecting Socket 8-pin P3G-08 8-pin, finger safe type P3G-08 with Y92A-48G (See note 1) 11-pin P3GA-11 11-pin, finger safe type P3GA-11 with Y92A-48G (See note 1) Hold-down Clip (See note 2) For PL08 and PL11 Sockets Y92H-1 For PF085A Socket Y92H-2 Note: 1. Y92A-48G is a finger safe terminal cover which is attached to the P3G-08 or P3GA-11 Socket. 2. Hold-down Clips are sold in sets of two. Specifications General Item H3CR-H8L H3CR-H8RL H3CR-HRL Operating/Reset method Instantaneous operation/Time-limit Instantaneous operation/Time-limit reset/Forced reset reset Pin type 8-pin 11-pin Input type --- No-voltage Output type Relay output (DPDT) Relay output (SPDT) Relay output (DPDT) Mounting method DIN track mounting, surface mounting, and flush mounting Approved standards UL508, CSA C22.2 No.14, NK, Lloyds Conforms to EN61812-1 and IEC60664-1 (VDE0110) 4kV/2. Output category according to EN60947-5-1. Time Ranges Time unit S-series M-series s (sec) min (min) Setting 0.6 0.05 to 0.6 1.2 0.12 to 1.2 6 0.6 to 6 12 1.2 to 12 Min. power ON time 0.1 s min. 2 s min. Time-up operation repeat period 3 s min. Forced-reset repeat period 3 s min. Note: 1. If the above minimum power ON time is not secured, the H3CR may not operate. Be sure to secure the above minimum power ON time. 2. Do not use the Timer with a repeat period of less than 3 s. Doing so may result in abnormal heating or burning. Refer to Safety Precautions (H3CR-H) on page 8 for details. 2