Sensor Controller S3D2 CSM S3D2 DS E 7 1 Offers High-speed Input Response of 0.1 ms and Equipped with Built-in Timer High-speed response of 0.1 ms. Ideal as a two-input Controller. Lineup includes the S3D2-BK with flip-flop functions convenient for level control, the S3D2-AKD/CKD/CCD with 24-V power supply, and the S3D2-DK/EK with one input/output OFF-delay (two circuits) useful for load control and lamp display Power source for the Sensor can be supplied up to 200 mA. Ultra-slim body with 30-mm width. Multi-function model equipped with timer functions also available. For the most recent information on models that have been certified for Be sure to read Safety Precautions on safety standards, refer to your OMRON website. page 7. Ordering Information Power supply voltage Output Timer function Features Model No S3D2-DK Single-function with one input/output (two circuits) Yes S3D2-EK Relay No Single-function with two inputs/one output (AND/OR operation) S3D2-AK * 100 to 240 VAC No Flip-flop function with two inputs/one output S3D2-BK Yes S3D2-CK * Multi-function with two inputs/one output Transistor Yes S3D2-CC * No Single-function with two inputs/one output S3D2-AKD Relay 24 VDC Yes S3D2-CKD Multi-function with two inputs/one output Transistor Yes S3D2-CCD * Models compatible with Sensors for PNP connections are also available. These model numbers have the suffix B (e.g., S3D2-AKB) Differences from NPN Models ON 8 to 12 V (5 mA min.) Input signals OFF 0 to 4 V (2 mA max.) Maximum applied voltage 12 V Note: S3D2-AK(B)/-CK(B)/-CC(B) models with UL certification are available. These model numbers have the suffix US (e.g., S3D2-AK-US). 1S3D2 Ratings and Specifications Two inputs/ Type Two inputs/one output two outputs Single-func- Single-func- Single-func- Single- Flip-flop tion (with tion (AND/OR Multi-function tion (AND/OR Multi-function (24 VDC) function function OFF-delay) operation) operation) Item Model S3D2-DK S3D2-EK S3D2-AK S3D2-BK S3D2-CK S3D2-CC S3D2-AKD S3D2-CKD S3D2-CCD Rated supply 100 to 240 VAC 10% 50/60Hz 24 VDC 10% voltages Power consumption 15 VA max. 2.5 VA max. (excluding Sensor power supply) Power supply for 12 VDC 10% (includes all variations), 200 mA max. (with short-circuit protection) 24 VDC (supplied from power supply) Sensor Connected Sensor NPN transistor output (with sinking current of 18 mA min.) or contact output ON 0 to 4 V (5 mA min.) OFF 8 to 12 V (2 mA max.) 8 to 30 V (2 mA max.) Short- Input circuit 11 mA TYP (18 mA max.) signals current Maximum applied 30 V voltage IN1 2 ms Input response time 0.1 ms 0.1 ms IN2 2 ms Output minimum 10 ms max. 0.5 ms max. 10 ms max. 0.5 ms max. pulse width NPN open NPN open collector output, collector output, 30 VDC, 100 mA 30 VDC, 100 mA Relay output SPST-NO Relay output SPDT (shared common) (NO, NC) Relay output SPDT (NO, NC) Control output 2 250 VAC, 3 A (cos = 1) Residual voltage 250 VAC, 3 A (cos = 1) Residual voltage 250 VAC, 2A (cos = 1) (ON)1.5 V max. (ON): 1.5 V max. Leakage current Leakage current (OFF): 0.1 mA max. (OFF): 0.1 mA max. 50,000,000 operations min. Mechanical 50,000,000 operations min. (switching frequency: 18,000 operations/h) (switching frequency: 18,000 Life ex- operations/h) pectan- --- --- cy (relay 100,000 operations min. output) Electrical 100,000 operations min. (switching frequency: 1,800 operations/h) (switching frequency: 1,800 operations/h) Output response time 10 ms max. 0.5 ms max. 10 ms max. 0.5 ms max. One-shot, ON-delay, One-shot, ON-delay, OFF-delay and OFF-delay and OFF-delay Timer functions * --- 0.1 to 1 s --- --- 0.1 to 1 s 0.01 to 0.1 s 0.1 to 1 s 0.01 to 0.1 s 1 to 10 s 1 to 10 s 0.1 to 1 s 1 to 10 s 0.1 to 1 s selectable selectable selectable selectable selectable Signal input Signal input reverse Signal input Signal input reverse reverse Signal input reverse AND/OR reverse Sync mode selection AND/OR Sync mode selection Other functions Signal input reverse operating Flip-flop AND/OR operating mode operating AND/OR operating mode mode selec- function selection mode selec- selection tion by wiring tion by wiring Maximum allowable time of momentary 20 ms max. power failure Ambient Operating: 10 to +55C, Storage: 25 to +65C (with no icing) temperature range Ambient humidity Operating/storage: 35% to 85% range Operating power supply: 480 V (p-p) min. pulse width: 100 ns, 1 s rise time: 1 ns Operating power supply: 1,500 V (p-p) min. pulse width: 100 ns, 1 s rise time: 1 ns Noise immunity Input/output: Input/output: 1,200 V (p-p) min. pulse width: 100 ns, 1 s rise time: 1 ns 1,000 V (p-p) min. pulse width: 100 ns, 1 s rise time: 1 ns 1,500 VAC min. 1,500 VAC min.(between power supply terminals and I/O terminals, and between non-cur- Dielectric strength (between power supply terminals and non-cur- rent-carrying parts) rent-carrying parts) Vibration 10 to 55 Hz, double-amplitude of 0.75 mm for 2 hours each of the X, Y, and Z directions (destruction) Weight Approx. 140 g * The timer will not operate in response to input signals received within 50 ms after the Controller power is turned ON. 2