XG2A-6401 Omron

Flat Cable Connectors for PCBs XG2 Ideal for high-density mounting. IDC design allows for quick termination. Part of a total flat cable wiring solution, when used in conjunction with XG4, XG5 and XG8 sockets and plugs. End terminates cable to a PCB or acts as a pass through for connection to other cables or PCBs. Uses a standard 2.54-mm grid terminal arrangement for easier design of circuits. Terminal Arrangement: standard or reverse. Uses UL94V-0 approved insulation material. IDC Assembly Tools are available. XG2 Connectors Terminal Arrangement The contact numbers are not marked on the Connector. If the cables are numbered from 1 starting from the edge, the relationship between the wires and the terminals would be as shown below. Standard Terminal Reverse Terminal Arrangement Arrangement Cable No. Cable No. Cable No. Cable No. Cable number arrangement (top view) Ratings and Characteristics Materials and Finish Rated current 1 A Base Fiber-glass reinforced PBT resin (UL94V-0)/black Rated voltage 250 VAC Contacts Mating end Copper alloy/nickel base, tin plating Contact resistance 15 m max. (at 20 mV, 100 mA max.) Terminals Copper alloy/nickel base, tin plating Insulation resistance 1,000 M min. (at 500 VDC) Cover Fiber-glass reinforced PBT resin Dielectric strength 500 VAC for 1 min. (leakage current: 1 mA (UL94V-0)/black max.) Operating 55C to 85C (with no icing at low temperature temperature) Applicable Wires 1.27-mm pitch, AWG28, 7-strand flat cable. UL2651 (standard cable) UL20012 (folding cable) UL20028 (color-coded cable) Flat Cable Connectors for PCBs XG2 61Double-row PCB Bus Connectors XG2A Dimensions Standard Terminal Arrangement: XG2A- 01 Reverse Terminal Arrangement: XG2A- 02 No. of Dimensions (mm) contacts AB Mounting holes (bottom view) 10 17.9 10.16 Reverse terminal arrangement 14 22.9 15.24 Standard terminal arrangement 16 25.5 17.78 +0.1 +0.1 0.8 dia. 0 0.8 dia. 0 20 30.6 22.86 26 38.2 30.46 30 43.3 35.56 34 48.3 40.64 40 56.0 48.26 Note: The cover is an open-end type. 50 68.7 60.96 60 81.4 73.66 64 86.4 78.74 Ordering Information Appearance No. of contacts Connectors with Connectors with standard terminal arrangement reverse terminal arrangement 10 XG2A-1001 XG2A-1002 14 XG2A-1401 XG2A-1402 16 XG2A-1601 XG2A-1602 20 XG2A-2001 XG2A-2002 26 XG2A-2601 XG2A-2602 30 XG2A-3001 XG2A-3002 34 XG2A-3401 XG2A-3402 40 XG2A-4001 XG2A-4002 50 XG2A-5001 XG2A-5002 60 XG2A-6001 XG2A-6002 64 XG2A-6401 XG2A-6402 Precautions Correct Use Handling Automated Soldering Conditions (Jet Flow) There is no Strain Relief for the PCB Connector. Leave enough 1. Soldering temperature: 250 5C slack to avoid tension on the cable. 2. Continuous soldering time: Within 5 s Terminals can be press fit no matter which direction the base and cover are facing. See XG - Assembly Tooling and Accessories datasheet for infor- mation on flat cable / connector assembly tools. 62 Flat Cable Connectors for PCBs XG2