R Z4D-F04A/D Compact, High-performance Micro-displacement Sensor H Provides resolution to 5 m and does not require connection to microprocessor H EE-1010D connector with 1-m cable and E39-L69 mounting bracket allows convenient, quick installation and easy maintenance H Power and alarm indicator included in the Z4D-F04A model H Stability/operation indicator and distance adjuster included in the Z4D-F04D model H Numerous applications possible when the analog output model is integrated with OMRONs K3TX Intelligent Signal Processors H ON/OFF output model (NPN open collector) is available Ordering Information Output Appearance Partnumber Analog Z4D-F04A ON/OFF Z4D-F04D J ACCESSORIES(ATTACHED) Item Z4D-F04A Z4D-F04D Partnumber Mounting bracket 1pc. 1pc. E39-L69 Mounting screws (M3 x 2) 2 pcs. 2 pcs. Connector with 1-m cord 1pc. 1pc. EE-1010D Screwdriver 1pc. Operation Manual 1 copy 1 copy Z4D-F04A/D Z4D-F04A/D Specifications J RATINGS/CHARACTERISTICS Part number Z4D-F04A Z4D-F04D Supply voltage 12 to 24 VDC 10%, ripple voltage (p-p): 10 mV max. Current consumption 35 mA max. Sensing range (See Note 1.) 4 1.25 mm Light source Red LED with a wavelength of 700 nm Spot diameter (See Note 2.) 1.5 x 1.5 mm max. (at the sensing range of 4 mm) Connection impedance (See Note 3.) 200 k min. --- Resolution (See Note 4.) 5 mmax. --- Hysteresis (See Note 1.) --- 40 m Linearity (See Note 5.) 1% FS --- Analog output (See Note 1.) 1to5V(1.6V/mm 10%) --- Control output --- NPN open collector, 12 to 24 VDC, 50 mA max. Residual output voltage --- 1Vmax. Response time (See Note 6.) 5msmax. 1.5 ms max. Temperature influence (See Note 7.) 0.15% FS/ C --- Indicator PWR indicator (green): Lit when power is STB indicator (green): Lit when illumination supplied is sufficient. ALM indicator (red): Lit when illumination is OPE indicator (orange): Lit when output is insufficient. ON. Ambient temperaturep Operating -10 Cto55 C(14 F to 131 F) with no icing Storage -15 Cto60 C(5 F to 140 F) with no icing Ambient humidity Operating 35% to 85% (with no icing) Ambient illumination Operating 3000 lx max. (incandescent lamp), 10,000 lx max. (sunlight) Enclosure rating IP50 (IEC standard) Vibration resistance Destruction: 10 to 500 Hz (1-mm max. single amplitude) for 11 min for 3 times each in X, Y, and Z directions 2 Shock resistance Destruction: 500 m/s for 3 times each in X, Y, and Z directions (total of 18 times) Dielectric strength 1,000 VAC for 1 min between current carry parts and case Tightening torque 0.6 NSmmax. Material ABS (Polycarbonate for the sensing part) Weight Approx. 10 g (without connector cable) Insulation resistance 20 M min. (at 500 VDC) Cable length 1m Note: 1. The values are for N8.5 Munsell paper. 2 2. The spot diameter is defined by 1/e of the sensors laser beam center. Although a sub-beam may be observed around the main beam, this does not mean that the product is defective. 3. Refers to input impedance of a device to be connected. 4. Resolution (Z4D-F04A) The resolution is the peak-to-peak displacement conversion value of the analog displacement output (Conditions: N8.5 Munsell mat paper at the center of measurement point with a power ripple noise of 10 mV (p-p) max.) Output fluctuation 2