74HCT08 Quad 2-Input AND Gate With LSTTLCompatible Inputs HighPerformance SiliconGate CMOS The 74HCT08 is identical in pinout to the LS08. The device has TTLcompatible inputs. 74HCT08 ORDERING INFORMATION Device Package Shipping 74HCT08DR2G SOIC14 (Pb Free) 74HCT08DR2GH SOIC14 2500/Tape & Reel (Halide Free) 74HCT08DTR2G TSSOP14* For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *This package is inherently PbFree. MAXIMUM RATINGS Symbol Parameter Value Unit This device contains protection circuitry to guard against damage V DC Supply Voltage (Referenced to GND) 0.5 to + 7.0 V CC due to high static voltages or electric V DC Input Voltage (Referenced to GND) 0.5 to + 7.0 V fields. However, precautions must in be taken to avoid applications of any V DC Output Voltage (Referenced to GND) 0.5 to V + 0.5 V out CC voltage higher than maximum rated I DC Input Current, per Pin 20 mA voltages to this highimpedance cir- in cuit. For proper operation, V and in I DC Output Current, per Pin 25 mA out V should be constrained to the out I DC Supply Current, V and GND Pins 50 mA range GND (V or V ) V . in out CC CC CC Unused inputs must always be P Power Dissipation in Still Air, SOIC Package 500 mW D tied to an appropriate logic voltage TSSOP Package 450 level (e.g., either GND or V ). CC Unused outputs must be left open. T Storage Temperature 65 to + 150 C stg T Lead Temperature, 1 mm from Case for 10 Seconds C L SOIC or TSSOP Package 260 Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Derating SOIC Package: 7 mW/ C from 65 to 125 C TSSOP Package: 6.1 mW/ C from 65 to 125 C For high frequency or heavy load considerations, see Chapter 2 of the ON Semiconductor High Speed CMOS Data Book (DL129/D). RECOMMENDED OPERATING CONDITIONS Symbol Parameter Min Max Unit V DC Supply Voltage (Referenced to GND) 4.5 5.5 V CC V DC Input Voltage (Referenced to GND) 0 5.5 V in V DC Output Voltage (Referenced to GND) 0 V V out CC T Operating Temperature, All Package Types 55 +125 C A t , t Input Rise and Fall Time V = 2.0 V 0 1000 ns r f CC (Figure 1) V = 4.5 V 0 500 CC V = 6.0 V 0 400 CC