AMIS3062XGEVK ON Semiconductor

AAAAMMMMIIIISSSS----3333000066662222xxxx EEEEvvvvaaaalllluuuuaaaattttiiiioooonnnn KKKKiiiitttt AAAAMMMMIIIISSSS----3333000066662222xxxx EEEEvvvvaaaalllluuuuaaaattttiiiioooonnnn KKKKiiiitttt Test Procedure Tom De Ryck June 23, 2009 This document describes the test procedure for the AMIS-3062x Evaluation Kit. All parts described below need to be tested before the Evaluation Kit can be shipped to a customer. Its important to follow the test procedure as given below to ensure a completely working Evaluation Kit. 1. ECUSIM MKII 600-SERIES The test description of EcuSim MkII 600-Series can be found in the EcuSim MkII Production Guide. 2. LIN AND IC CABLE If tested cables are bought, the cables do not need to be re-tested. If the cables are custom/hand made, the cables need to be tested. Testing can be done by means of a cable tester or by doing the AMIS-3062x Evaluation Kit Test. 3. MOTHERBOARD The Motherboard needs to be tested by doing the AMIS-3062x Evaluation Kit Test. 4. DAUGHTERBOARD The Daughterboard(s) can be tested by doing the AMIS-3062x Evaluation Kit Test. 2 June 23, 2009 5. AMIS-3062X EVALUATION KIT TEST Follow next steps to test the AMIS-3062x Evaluation Kit. Step 1: Install the Stepper Motor Driver GUI. Go to the ON Semiconductor website (www.onsemi.com) to download the Stepper Motor Driver GUI. Click Design Support (1). Go to the Design Resources page (2) and select Software (3). Download the AMIS-3062x Evaluation Kit GUI by clicking the appropriate link in the software list. 1 2 3 Figure 1: Download the AMIS-3062x Evaluation Kit GUI Once downloaded, run the downloaded executable to start the installation process. The Installation Wizard will guide you through the complete installation of the AMIS-3062x Evaluation Kit GUI. Step 2: Start the AMIS-3062x Evaluation Kit GUI. The AMIS-3062x Evaluation Kit GUI can be opened from the Windows Start Menu (Start > All Programs > AMI Semiconductor > AMIS-3062x Evaluation Kit > AMIS-3062x Evaluation Kit). Step 3: Select the interface to be used. AMIS-3062x stepper motor driver has two types of interfaces, LIN and IC. Which interface is used depends on the Daughterboard used. If AMIS-30621 or AMIS-30623 is used, the LIN Interface Test has to be done. If AMIS-30622 or AMIS-30624 is used, the IC Interface Test has to be done.