AR0330CS AR0330CS and AR0330SR 1/3-Inch CMOS Digital Image Sensor General Description The AR0330CS can be operated in its default mode or programmed www.onsemi.com for frame size, exposure, gain, and other parameters. The default mode output is a 2304 x 1296 image at 30 frames per second (fps). The sensor outputs 10 or 12bit raw data, using either the parallel or serial (MIPI) output ports. The ON Semiconductor AR0330CS is a 1/3inch CMOS digital image sensor with an activepixel array of 2304 (H) x1536 (V). It can PLCC48 ODCSP64 support 3.15 megapixel (2048H x 1536 V) digital still image capture 11.43x11.43 6.278x6.648 and a 1080p30 +20%EIS (2304H x 1296 V) digital video mode. It CASE 776AM CASE 570BH incorporates sophisticated on chip camera functions such as windowing, mirroring, column and row subsampling modes, and snapshot modes. ORDERING INFORMATION See detailed ordering and shipping information on page 2 of this data sheet. Table 1. KEY PARAMETERS Parameter Typical Value Optical Format 1/3inch (6.0 mm) Features (continued) Entire Array: 6.09 mm 2.2 m Pixel with ON Semiconductor Still Image: 5.63 mm (4:3) APix technology HD Image: 5.82 mm (16:9) Superior Lowlight Performance Active Pixels 2304(H) x 1536(V): (Entire Array): 3.5 Mp Active Array, 2.9 Mp (16:9) Video 5.07 mm (H) x 3.38 mm (V) 3.4 Mp (3:2) and 3.15 Mp (4:3) Still Images 2048(H) x 1536(V) (4:3, Still Mode) Support for External Mechanical Shutter 2304(H) x 1296(V) (16:9, sHD Mode) Support for External LED or Xenon Flash Pixel Size 2.2 m x 2.2 m Data Interfaces: Twolane Serial MIPI or Color Filter Array RGB Bayer Parallel Interface Shutter Type ERS and GRR Onchip phaselocked Loop (PLL) Input Clock Range 6 27 MHz Oscillator Output Clock Maximum 98 Mp/s (Parallel, MIPI) Integrated Positionbased Color and Lens (CLK OP) Shading Correction Responsivity 2.0 V/luxsec Simple Twowire Serial Interface Power Consumption 1080P30 MIPI Mode: 282 mW Auto Black Level Calibration 1080P30 Parallel Mode: 252 mW 12to10 bit Output ALaw Compression SNR MAX 39 dB Slave Mode for Precise Framerate Control Dynamic Range 69.5 dB and for Synchronizing Two Sensors Supply I/O/Digital 1.71.9 V (1.8 V Nominal) or Voltage Applications 2.43.1 V (2.8 V Nominal) 1080P30 Highdefinition Digital Video Digital 1.71.9 V (1.8 V Nominal) Camcorder Analog 2.762.9 V Web Cameras and Video Conferencing Operating Temperature 30C to + 70 C Cameras (junction) T J Security Package Options 6.28 mm x 6.65 mm CSP 11.43 mm x 11.43 mm PLCC Semiconductor Components Industries, LLC, 2012 1 Publication Order Number: January, 2019 Rev. 8 AR0330CS/DAR0330CS ORDERING INFORMATION Table 2. AVAILABLE PART NUMBERS Part Number Product Description Orderable Product Attribute Description AR0330CS1C12SPKA0CP 3.5 MP, 1/3inch, 12 Deg CRA, Parallel, MIPI, CSP Tray, Protective Film AR0330CS1C12SPKA0CR 3.5 MP, 1/3inch, 12 Deg CRA, Parallel, MIPI, CSP Tray, No Protective Film AR0330CSSC12SPBA0DR 3.5 MP, 1/3inch, 12 Deg CRA, Parallel, PLCC Tray, No Protective Film AR0330SR1C00SUKA0CP 3.5 MP, 1/3inch, 0 Deg CRA, Parallel, CSP Tray, Protective Film AR0330SR1C00SUKA0CR 3.5 MP, 1/3inch, 0 Deg CRA, Parallel, CSP Tray, No Protective Film AR0330CS1C12SPKAH3GEVB 3.5 MP, 1/3 inch, 12 Deg CRA, Parallel, MIPI, CSP Evaluation board FUNCTIONAL OVERVIEW The AR0330CS is a progressivescan sensor that between 6 and 27 MHz. The maximum CLK OP is 98 Mp/s generates a stream of pixel data at a constant frame rate. It using MIPI serial interface and 98 Mp/s using the parallel uses an onchip, phaselocked loop (PLL) that can generate interface. all internal clocks from a single master input clock running Test Pattern Generator Ext Clock 12bit Analog Core Digital Core Output DataPath Row Noise Correction Compression (optional) PLL Black Level Correction Lens Shading Correction Timing Column and Digital Gain Pixel Array Amplifiers Control Data Pedestal 12bit 12bit ADC 8, 10, or Registers 12bit 12bit Two wire serial I/F MIPI I/O: Parallel I/O: CLK P/N, PIXCLK, FV, 1. Two lane data paths LV, DOUT 11:0 only 2. 98 Mp/sec Ma x 98 Mp/s Max CLK OP 98 Mp/s Figure 1. Block Diagram User interaction with the sensor is through the twowire controlled by varying the time interval between reset and serial bus, which communicates with the array control, readout. Once a row has been read, the signal from the analog signal chain, and digital signal chain. The core of the column is amplified in a column amplifier and then digitized sensor is a 3.5 Mp active pixel sensor array. The timing and in an analogtodigital converter (ADC). The output from control circuitry sequences through the rows of the array, the ADC is a 12bit value for each pixel in the array. The resetting and then reading each row in turn. In the time ADC output passes through a digital processing signal chain interval between resetting a row and reading that row, the (which provides further data path corrections and applies pixels in the row integrate incident light. The exposure is digital gain). www.onsemi.com 2 Row Drivers