CM2009-00QR ON Semiconductor

CM2009 VGA Port Companion Circuit Product Description The CM2009 connects between a video graphics controller embedded in a PC, graphics adapter card or set top box and the VGA CM2009 SIMPLIFIED ELECTRICAL SCHEMATIC 9 DDC OUT1 V CC VIDEO 12 DDC OUT2 2 V V BYP CC SYNC CC DDC 7 8 1 3 VIDEO 1 4 VIDEO 2 R R 5 T T VIDEO 3 6 16 GND SYNC OUT2 14 SYNC OUT1 GND 10 DDC IN1 11 DDC IN2 13 SYNC IN1 15 SYNC IN2 PACKAGE / PINOUT DIAGRAM Top View V SYNC OUT2 1 16 CC SYNC V 2 15 SYNC IN2 CC VIDEO VIDEO 1 SYNC OUT1 3 14 VIDEO 2 SYNC IN1 4 13 VIDEO 3 5 12 DDC OUT2 6 11 GND DDC IN2 V 7 10 DDC IN1 CC DDC BYP DDC OUT1 8 9 16 Pin QSOP Table 1. PIN DESCRIPTIONS Lead(s) Name Description 1 V This is an isolated supply input for the SYNC 1 and SYNC 2 level shifters and their associated ESD CC SYNC protection circuits. 2 V This is a supply pin specifically for the VIDEO 1, VIDEO 2 and VIDEO 3 ESD protection circuits. CC VIDEO 3 VIDEO 1 Video signal ESD protection channel. This pin is typically tied one of the video lines between the VGA controller device and the video connector. 4 VIDEO 2 Video signal ESD protection channel. This pin is typically tied one of the video lines between the VGA controller device and the video connector. 5 VIDEO 3 Video signal ESD protection channel. This pin is typically tied one of the video lines between the VGA controller device and the video connector. 6 GND Ground reference supply pin. 7 V This is an isolated supply input for the DDC 1 and DDC 2 level shifting NFET gates. CC DDC 8 BYP This input is used to connect an external 0.2 F bypass capacitor to the DDC circuits, resulting in an increased ESD withstand voltage rating for these circuits (8 kV with vs. 4 kV without). 9 DDC OUT1 DDC signal output. Connects to the video connector side of one of the sync lines. 10 DDC IN1 DDC signal input. Connects to the VGA controller side of one of the sync lines.