Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductors system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore ( ), the underscore ( ) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore ( ). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild questions onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductors product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. Typical parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customers technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.FPF2488 Dual Channel Over-Voltage Protection Load Switch February 2015 FPF2488 Dual Channel Over-Voltage Protection Load Switch Description Features The FPF2488 features a 2-channel power switch, which Dual Channel Power Switch (V and V ) BUS IF offers surge protection and Over-Voltage Protection (OVP), to protect downstream components and Surge Protection under IEC 61000-4-5 enhancing overall system robustness. V : 100 V BUS V : 40 V Channel one (V ) is an active-low, 28 V/2.5 A rated, IF BUS power MOSFET switch with an internal clamp Input Voltage Range supporting 100 V surge protection, highly accurate V : 2.5 V ~ 23 V BUS fixed OVP at 10.0 V (100 mV), and OTG functionality. Channel two (V ) is a conditional active-high, 6 V/6 A IF V : 3.1 V ~ 5.5 V IF rated, power MOSFET switch with an integrated TVS Max Continuous Current Capability supporting 40 V surge protection and fixed OVP at V : 2.5 A BUS 5.25 V ( 250 mV). VIF also provides Reverse Current Blocking (RCB) during its OFF state to minimize V : 6 A IF leakage current. Ultra Low On-Resistance V is paired with always ON LDO to power BUS DET - V : Typ. 33 m BUS downstream devices even with VBUS is greater than 2.5 V, even when disabled through the ONB pin. This - V : Typ. 10 m IF provides power sequence control or a host controlled Over Voltage Protection configuration in system. - V : 10 V 100 mV BUS The FPF2488 is available in a 15-bump, 1.6 mm x 2.2 mm Wafer-Level Chip-Scale Package (WLCSP) with - V : 5.25 V 250 mV IF 0.4 mm pitch. LDO Output based V for V Detection BUS DET BUS Active Low Control for V Path Related Resources BUS OTG Functionality on V Path BUS