LA6586FA-BH ON Semiconductor

Ordering number : ENA2043 LA6586FA Monolithic Linear IC BTL Driver Single-Phase Full-Wave LA6586FA Recommended Operating Range at Ta = 25 C Parameter Symbol Conditions Ratings Unit Supply voltage V 2.2 to 14.0 V CC Common-phase input voltage VICM 0 to V-1.5 V CC range of Hall input Electrical Characteristics at Ta = 25 C, V = 12 V CC Ratings Parameter Symbol Conditions Unit min typ max Circuit current I 1 During drive (CT = L) 3 6 9 mA CC I 2 During lock protection (CT = H) 2.5 5 7.5 mA CC Lock detection capacitor charge current ICT1 0.9 1.2 1.5 A Capacitor discharge current ICT2 0.10 0.18 0.25 A Capacitor charge and discharge current ratio RCT RCT = ICT1/ICT2 5 6.5 8 - CT charge voltage VCT1 1.3 1.5 1.7 V CT discharge voltage VCT2 0.3 0.5 0.7 V OUT output L saturation voltage VOL I = 200 mA 0.25 0.45 V O OUT output H saturation voltage VOH I = 200 mA 0.95 1.2 V O Input offset voltage VOFST 3 6 mV Hall input sensitivity VHN Zero peak value 7 15 mV (including offset and hysteresis) Hall bias output L voltage VHB IHB = 5 mA 1.3 1.5 1.7 V RD/FG input pin L voltage VFG IRD/FG = 5 mA 0.15 0.3 V RD/FG input pin leak current IFGL VRD/FG = 15 V 1 30 A Overheat protection circuit TSD (*1) Designed target value 150 180 210 C (*1) The standard is a design target and the measurement with a single unit is not made. Package Dimensions unit : mm 3428 Pd max -- Ta 0.5 3.0 3 Specified board : 20mm 10mm 0.8mm 10 paper phenol 0.4 0.3 0.2 0.192 1 2 0.5 0.25 0.16 0.1 0 -30 -10 10 30 50 70 90 110 Ambient temperature, Ta -- C SANYO : Micro10 No.A2043-2/7 0.1 3.0 1.03 4.9 0.55 Allowable power dissipation, Pd max -- W