LB11861MC-AH ON Semiconductor

Ordering number : ENA2023 LB11861MC Monolithic Digital IC Single-Phase Full-Wave LB11861MC Specifications Absolute Maximum Ratings at Ta = 25C Parameter Symbol Conditions Ratings Unit V maximum output voltage Vmax 18 V CC CC OUT pin maximum output current I max 1.2 A OUT OUT pin output voltage V max 18 V OUT PWM-IN input pin voltage VPWM-INmax V V CC FG output pin output voltage VFGmax 18 V FG output current IFGmax 10 mA Allowable power dissipation Pd max When mounted on a circuit board *1 W 0.8 Operating temperature Topr C -30 to +90 Storage temperature Tstg C -55 to +150 3 *1 Specified circuit board : 114.3 76.1 1.6mm , glass epoxy. Caution 1) Absolute maximum ratings represent the value which cannot be exceeded for any length of time. Caution 2) Even when the device is used within the range of absolute maximum ratings, as a result of continuous usage under high temperature, high current, high voltage, or drastic temperature change, the reliability of the IC may be degraded. Please contact us for the further details. Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Recommended Operating Conditions at Ta = 25C Parameter Symbol Conditions Ratings Unit V supply voltage V V 4.5 to 16 CC CC VPWM-IN input H voltage range VPWM-IN-H 2.5 to V V CC VPWM-IN input L voltage range VPWM-IN-L 0 to 1 V Hall sensor input common-mode VICM 0.2 to 3 V input voltage range Electrical Characteristics Unless otherwise specified Ta = 25C, V = 12V CC Ratings Parameter Symbol Conditions Unit min typ max Circuit current I1 Drive mode 15 24.5 29 mA CC I 2 Lock protection mode 6 11 16 A CC CT pin high-level voltage VCTH 3.45 3.6 3.75 V CT pin low-level voltage VCTL 1.4 1.55 1.7 V ICT charge current ICT1 1.7 2.2 2.8 A ICT discharge current ICT2 0.17 0.22 0.28 A ICT charge/discharge current ratio RCT 8 10 11.5 OUT output low saturation voltage V I = 200mA 0.2 0.3 V OL O OUT output high saturation voltage V I = 200mA 0.9 1.1 V OH O Hall sensor input sensitivity VHN Zero peak value (including offset and 10 20 mV hysteresis) PWM-IN input current IPIN PWM-IN=0V -10 A RD/FG output pin low-level voltage VRDL/FGL IRD/FG = 5mA 0.2 0.3 V RD/FG output pin leakage current IRDL/FGL VRD/FG = 7V 30 A Heat protection circuit THD (*2) Design target 180 C (*2) The standard is a design target value and measurement with the single piece has not been made. No.A2023-2/5