ON Semiconductor Is Now To learn more about onsemi, please visit our website at www.onsemi.com onsemi andand other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba onsemi or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided as-is and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. Typical parameters which may be provided in onsemi data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customers technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and holdo nsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Other names and brands may be claimed as the property of others. LV8811G, LV8813G, LV8814J Motor Driver, 3-Phase, PWM, Full-Wave, BLDC Overview The LV8811G, LV8813G, and LV8814J are 3-phase BLDC motor drivers www.onsemi.com which are controlled with single Hall sensor. A 180 degrees sinusoidal driving method is adopted and the IC can control motor with low vibration and the low noise. Lead-angle adjustment is possible by external pins. The lead-angle base and lead-angle slope can be adjusted independently. Thus, the device can be driven by high efficiency and low noise with various motors. The power element to drive a motor is built-in and contributes to high efficiency by low on resistance (0.5 ). The Hall sensor bias driver is equipped, and a Hall IC is supported as well. As a method of the rotary speed control of the motor, direct-PWM pulse input or DC-voltage input can be chosen. LV8811G, LV8813G : 20-pin TSSOP with exposed pad Features CASE 948AZ 3-phase full wave (sinusoidal) drive LV8814J: 20-pin SSOP Any practical combination of slot and pole can be handled. (e.g. 3S2P, 3S4P, CASE 565AN 6S4P, 6S8P, 12S8P, 9S12P and so on) MARKING DIAGRAM Built-in power FETs (P-MOS/N-MOS) Speed control function by direct PWM or DC voltage input Minimum input PWM duty cycle can be configured by voltage input Soft start-up function and soft shutdown function Soft PWM duty cycle transitions Built-in current limit circuit and thermal protection circuit Regulated voltage output pin for Hall sensor bias Built-in locked rotor protection and auto recovery circuit FG signal output XXXX = Specific Device Code Dynamic lead angle adjustment with respect to rotational speed Y = Year M = Month Lead-angle control parameters can be configured by voltage inputs. DDD = Additional Traceability Data Typical Applications ORDERING INFORMATION Refrigerator Ordering Code: PC LV8811G-AH LV8813G-AH Games LV8814J-AH Package LV8811G, LV8813G TSSOP20J (Pb-Free / Halogen Free) LV8814J SSOP20 (Pb-Free / Halogen Free) Shipping (Qty / packing) 2000 / Tape & Reel For inf ormation on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.