MC10H104 Quad 2Input AND Gate Description The MC10H104 is a quad 2-input AND gate. One of the gates has both AND/NAND outputs available. This MECL 10H part is a functional/pinout duplication of the standard MECL 10K family www.onsemi.com part, with 100% improvement in propagation delay, and no increase in power supply current. Features Propagation Delay, 1.0 ns Typical 16 Power Dissipation 25 mW/Gate (same as MECL 10K) 20 1 1 Improved Noise Margin 150 mV (Over Operating Voltage and Temperature Range) PDIP16 PLLC20 P SUFFIX FN SUFFIX Voltage Compensated CASE 64808 CASE 77502 MECL 10K Compatible These Devices are Pb-Free, Halogen Free and are RoHS Compliant MARKING DIAGRAMS* 120 16 MC10H104P AWLYYWWG 10H104G AWLYYWW 1 A = Assembly Location WL, L = Wafer Lot YY, Y = Year WW, W = Work Week G = Pb-Free Package *For additional marking information, refer to Application Note AND8002/D. ORDERING INFORMATION Device Package Shipping MC10H104FNG PLCC20 46 Units/Tube (Pb-Free) MC10H104FNR2G PLCC20 500/Tape & Reel (Pb-Free) MC10H104PG PDIP-16 25 Units/Tube (Pb-Free) For information on tape and reel specifications, in- cluding part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. Semiconductor Components Industries, LLC, 2016 1 Publication Order Number: August, 2016 Rev. 9 MC10H104/DMC10H104 V V 1 16 CC1 CC2 4 2 A 2 15 D out out 5 B C 3 14 out out 6 3 7 A D 4 13 in in 10 D A 5 12 in in 14 11 B C 6 11 in in 12 9 B C 13 15 7 10 in in V = Pin 1 CC1 V D 8 9 EE out V = Pin 16 CC2 V = Pin 8 EE Pin assignment is for Dual-in-Line Package. Figure 1. Logic Diagram Figure 2. Pin Assignment Table 1. MAXIMUM RATINGS Symbol Characteristic Rating Unit V Power Supply (V = 0) 8.0 to 0 Vdc EE CC V Input Voltage (V = 0) 0 to V Vdc I CC EE I Output Current mA out Continuous 50 Surge 100 T Operating Temperature Range 0 to +75 C A T Storage Temperature Range C stg Plastic 55 to +150 Ceramic 55 to +165 Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. Table 2. ELECTRICAL CHARACTERISTICS (V = 5.2 V 5%) (Note 1) EE 0 25 75 Symbol Characteristic Min Max Min Max Min Max Unit I Power Supply Current 39 35 39 mA E I Input Current High 425 265 265 A inH I Input Current Low 0.5 0.5 0.3 A inL V High Output Voltage 1.02 0.84 0.98 0.81 0.92 0.735 Vdc OH V Low Output Voltage 1.95 1.63 1.95 1.63 1.95 1.60 Vdc OL V High Input Voltage 1.17 0.84 1.13 0.81 1.07 0.735 Vdc IH V Low Input Voltage 1.95 1.48 1.95 1.48 1.95 1.45 Vdc IL 1. Each MECL 10H series circuit has been designed to meet the dc specifications shown in the test table, after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and transverse air flow greater than 500 lfpm is maintained. Outputs are terminated through a 50 resistor to 2.0 V. www.onsemi.com 2