MC10H164
8Line Multiplexer
Description
The MC10H164 is a MECL 10H part which is a functional/pinout
duplication of the standard MECL 10K family part, with 100%
improvement in propagation delay, and no increase in power supply
www.onsemi.com
current.
The MC10H164 is designed to be used in data multiplexing and
parallel to serial conversion applications. Full parallel gating provides
equal delays through any data path. The MC10H164 incorporates an
output buffer, eight inputs and an enable. A high on the enable forces
16 20
the output low. The open emitter output allows the MC10H164 to be
1
connected directly to a data bus. The enable line allows an easy means 1
of expanding to more than 8 lines using additional MC10H164s.
PDIP16 PLLC20
P SUFFIX FN SUFFIX
CASE 64808 CASE 77502
Features
Propagation Delay, 1.0 ns Typical
Power Dissipation, 310 mW Typical (same as MECL 10K)
MARKING DIAGRAMS*
Improved Noise Margin 150 mV
(Over Operating Voltage and Temperature Range) 120
Voltage Compensated
16
MECL 10K-Compatible
MC10H164P
10H164G
AWLYYWWG
These Devices are Pb-Free, Halogen Free and are RoHS Compliant
AWLYYWW
1
PDIP16 PLLC20
A = Assembly Location
WL, L = Wafer Lot
YY, Y = Year
WW, W = Work Week
G = Pb-Free Package
*For additional marking information, refer to
Application Note AND8002/D.
ORDERING INFORMATION
Device Package Shipping
MC10H164FNG PLLC20 46 Units / Tube
(Pb-Free)
MC10H164FNR2G PLLC20 500 Tape & Reel
(Pb-Free)
MC10H164PG PDIP16 25 Units / Tube
(Pb-Free)
For information on tape and reel specifications, in-
cluding part orientation and tape sizes, please refer
to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
Semiconductor Components Industries, LLC, 2006
1 Publication Order Number:
August, 2016 Rev. 9 MC10H164/DMC10H164
LOGIC DIAGRAM
TRUTH TABLE
ADDRESS INPUTS
A 7
ENABLE CB A Z
V = PIN 1
CC1
L L L L X0
B 9
V = PIN 16
CC2
L L L H X1
L L H L X2
V = PIN 8
EE
C 10
L L H H X3
Enable 2
Z
L H L L X4
15
L H L H X5
X0 6
L H H L X6
L H H H X7
X1 5
XLXX
H
X2 4
X3 3
X4 11
X5 12
X6 13
X7 14
DIP PIN ASSIGNMENT
V 1 16 V
CC1 CC2
2 15
ENABLE Z
X3 3 14 X7
X2 4 13 X6
5 12
X1 X5
X0 6 11 X4
A 7 10 C
V 8 9 B
EE
Pin assignment is for DualinLine Package.
For PLCC pin assignment, see the Pin Conversion Tables on page 18
of the ON Semiconductor MECL Data Book (DL122/D).
Table 1. MAXIMUM RATINGS
Symbol Characteristic Rating Unit
V Power Supply (V = 0) 8.0 to 0 Vdc
EE CC
V Input Voltage (V = 0) 0 to V Vdc
I CC EE
I Output Current mA
out
Continuous 50
Surge 100
T Operating Temperature Range 0 to +75 C
A
T Storage Temperature Range C
stg
Plastic 55 to +150
Ceramic 55 to +165
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
www.onsemi.com
2