MT9M001: 1/2-Inch Megapixel Digital Image Sensor Features 1/2-Inch Megapixel CMOS Digital Image Sensor MT9M001C12STM (Monochrome) Datasheet, Rev. M For the latest datasheet, please visit www.onsemi.com Table 1: Key Performance Parameters Features Parameter Value Array Format (5:4): 1,280H x 1,024V (1,310,720 active Optical format 1/2-inch (5:4) pixels). Total (incl. dark pixels): 1,312H x 1,048V Active imager size 6.66 mm (H) x 5.32 mm (V) (1,374,976 pixels) Active pixels 1,280 H x 1,024 V Frame Rate: 30 fps progressive scan programmable Pixel size 5.2 m x 5.2 m Shutter: Electronic Rolling Shutter (ERS) Shutter type Electronic rolling shutter (ERS) Window Size: SXGA programmable to any smaller Maximum data rate/ format (VGA, QVGA, CIF, QCIF, etc.) 48 MPS/48 MHz master clock Programmable Controls: Gain, frame rate, frame size Frame SXGA 30 fps progressive scan rate (1280 x 1024) programmable Applications ADC resolution 10-bit, on-chip Responsivity 2.1 V/lux-sec Digital still cameras Dynamic range 68.2 dB Digital video cameras SNR 45 dB MAX PC cameras Supply voltage 3.0 V3.6 V, 3.3 V nominal 363 mW at 3.3 V (operating) Power consumption General Description 294 W (standby) Operating temperature 0C to +70C The ON Semiconductor MT9M001 is an SXGA-format Packaging 48-pin CLCC with a 1/2-inch CMOS active-pixel digital image sen- sor. The active imaging pixel array of 1,280H x 1,024V. It The sensor can be operated in its default mode or pro- incorporates sophisticated camera functions on-chip grammed by the user for frame size, exposure, gain set- such as windowing, column and row skip mode, and ting, and other parameters. The default mode outputs snapshot mode. It is programmable through a simple an SXGA-size image at 30 frames per second (fps). An two-wire serial interface. on-chip analog-to-digital converter (ADC) provides 10 bits per pixel. FRAME VALID and LINE VALID signals This megapixel CMOS image sensor features ON Semi- are output on dedicated pins, along with a pixel clock conductors breakthrough low-noise CMOS imaging that is synchronous with valid data. technology that achieves CCD image quality (based on signal-to-noise ratio and low-light sensitivity) while maintaining the inherent size, cost, and integration advantages of CMOS. MT9M001 DS Rev. M Pub. 5/15 EN 1 Semiconductor Components Industries, LLC , MT9M001: 1/2-Inch Megapixel Digital Image Sensor Ordering Information Ordering Information Table 2: Available Part Numbers Part Number Product Description Orderable Product Attribute Description MT9M001C12STM-DP 1 MP 1/2 CIS Dry Pack with Protective Film MT9M001C12STM-DR 1 MP 1/2 CIS Dry Pack without Protective Film MT9M001C12STM-DR1 1 MP 1/2 CIS Dry Pack Single Tray without Protective Film MT9M001C12STM-TP 1 MP 1/2 CIS Tape & Reel with Protective Film MT9M001C12STM-TR 1 MP 1/2 CIS Tape & Reel without Protective Film MT9M001D00STMC84AC1-200 1 MP 1/2 CIS Die Sales, 200 m Thickness MT9M001 DS Rev. M Pub. 5/15 EN 2 Semiconductor Components Industries, LLC,2015.