NCP130AMX120TCG ON Semiconductor

NCP130 300 mA, Very Low Dropout Bias Rail CMOS Voltage Regulator The NCP130 is a 300 mA VLDO equipped with NMOS pass transistor and a separate bias supply voltage (V ). The device BIAS www.onsemi.com provides very stable, accurate output voltage with low noise suitable T for space constrained, noise sensitive applications. In order to optimize performance for battery operated portable applications, the MARKING NCP130 features low I consumption. The XDFN6 1.2 mm x 1.2 mm Q DIAGRAM package is optimized for use in space constrained applications. XDFN6 XX M Features CASE 711AT Input Voltage Range: 0.8 V to 5.5 V Bias Voltage Range: 2.4 V to 5.5 V XX = Specific Device Code Fixed Output Voltage Device M = Date Code Output Voltage Range: 0.8 V to 2.1 V 1.5% Accuracy over Temperature, 0.5% V 25C OUT PIN CONNECTIONS UltraLow Dropout: 150 mV Maximum at 300 mA Very Low Bias Input Current of Typ. 80 A Very Low Bias Input Current in Disable Mode: Typ. 0.5 A OUT IN 1 6 Logic Level Enable Input for ON/OFF Control Output Active Discharge Option Available Thermal NC GND 2 5 Pad Stable with a 1 F Ceramic Capacitor Available in XDFN6 1.2 mm x 1.2 mm x 0.37 mm Package These Devices are PbFree, Halogen Free/BFR Free and are RoHS EN 3 4 BIAS Compliant (Top VIew) Typical Applications Batterypowered Equipment Smartphones, Tablets ORDERING INFORMATION See detailed ordering, marking and shipping information on Cameras, DVRs, STB and Camcorders page 8 of this data sheet. V BIAS 2.7 V NCP130 100 nF BIAS OUT V OUT 1.0 V 300 mA V IN IN 1 F 1.3 V 1 F EN GND V EN Figure 1. Typical Application Schematics Semiconductor Components Industries, LLC, 2016 1 Publication Order Number: January, 2018 Rev. 5 NCP130/DNCP130 CURRENT IN OUT LIMIT ENABLE EN BLOCK UVLO BIAS 150 VOLTAGE + REFERENCE THERMAL LIMIT *Active DISCHARGE GND *Active output discharge function is present only in NCP130AMXyyyTCG devices. yyy denotes the particular output voltage option. Figure 2. Simplified Schematic Block Diagram PIN FUNCTION DESCRIPTION Pin No. Pin Name Description 1 OUT Regulated Output Voltage pin 2 N/C Not internally connected 3 EN Enable pin. Driving this pin high enables the regulator. Driving this pin low puts the regulator into shutdown mode. 4 BIAS Bias voltage supply for internal control circuits. This pin is monitored by internal Under-Voltage Lockout Circuit. 5 GND Ground pin 6 IN Input Voltage Supply pin Pad Should be soldered to the ground plane for increased thermal performance. ABSOLUTE MAXIMUM RATINGS Rating Symbol Value Unit Input Voltage (Note 1) V 0.3 to 6 V IN Output Voltage V 0.3 to (V +0.3) 6 V OUT IN Chip Enable and Bias Input V V 0.3 to 6 V EN, BIAS Output Short Circuit Duration t unlimited s SC Maximum Junction Temperature T 150 C J Storage Temperature T 55 to 150 C STG ESD Capability, Human Body Model (Note 2) ESD 2000 V HBM ESD Capability, Machine Model (Note 2) ESD 200 V MM Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. Refer to ELECTRICAL CHARACTERISTIS and APPLICATION INFORMATION for Safe Operating Area. 2. This device series incorporates ESD protection (except OUT pin) and is tested by the following methods: ESD Human Body Model tested per EIA/JESD22A114 ESD Machine Model tested per EIA/JESD22A115 Latchup Current Maximum Rating tested per JEDEC standard: JESD78. THERMAL CHARACTERISTICS Rating Symbol Value Unit Thermal Characteristics, XDFN6 1.2 mm x 1.2 mm Thermal Resistance, JunctiontoAir R 170 C/W JA www.onsemi.com 2