NCP699 LDO Regulator - CMOS, Low Iq, Enable, TSOP-5 150 mA The NCP699 series of fixed output LDOs are designed for NCP699 PIN FUNCTION DESCRIPTION Pin No. Pin Name Description 1 Vin Positive power supply input voltage. 2 Gnd Power supply ground. 3 Enable This input is used to place the device into low power standby. When this input is pulled low, the device is disabled. If this function is not used, Enable should be connected to Vin. 4 N/C No internal connection. 5 Vout Regulated output voltage. MAXIMUM RATINGS Rating Symbol Value Unit Input Voltage V 2.1 to 6.0 V in Enable Voltage Enable 0.3 to V +0.3 V in Output Voltage V 0.3 to V +0.3 V out in Power Dissipation P Internally Limited W D Operating Junction Temperature T +150 C J Maximum Junction Temperature T +150 C J(max) Operating Ambient Temperature T 40 to +85 C A Storage Temperature T 55 to +150 C stg Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. This device series contains ESD protection and exceeds the following tests: Human Body Model 2000 V per MILSTD883, Method 3015 Machine Model Method 200 V 2. Latchup capability (85C) 200 mA DC with trigger voltage. THERMAL CHARACTERISTICS Rating Symbol Test Conditions Typical Value Unit 2 JunctiontoAmbient R 1 oz Copper Thickness, 100 mm 250 C/W JA 2 PSIJLead 2 1 oz Copper Thickness, 100 mm 68 C/W JL2 NOTE: Single component mounted on an 80 x 80 x 1.5 mm FR4 PCB with stated copper head spreading area. Using the following boundary conditions as stated in EIA/JESD 511, 2, 3, 7, 12.