NCP716 80 mA Ultra-Low Iq, Wide Input Voltage Low Dropout Regulator The NCP716 is 80 mA LDO Linear Voltage Regulator. It is a very stable and accurate device with ultralow ground current consumption www.onsemi.com (4.7 A over the full output load range) and a wide input voltage range (up to 24 V). The regulator incorporates several protection features MARKING such as Thermal Shutdown and Current Limiting. DIAGRAMS Features 1 WDFN6 Operating Input Voltage Range: 2.5 V to 24 V XX M CASE 511BR Fixed Voltage Options Available: 1.2 V to 5.0 V XX = Specific Device Code Ultra Low Quiescent Current: Max. 4.7 A over Temperature M = Date Code 2% Accuracy over Full Load, Line and Temperature Variations PSRR: 60 dB at 100 kHz PIN CONNECTIONS Noise: 200 V from 200 Hz to 100 kHz RMS Thermal Shutdown and Current Limit Protection 1 6 Available in WDFN6, 2x2x0.8 mm Package 2 5 EXP This is a PbFree Device 3 4 Typical Applicaitons WDFN6 2x2 mm Portable Equipment (Top View) Communication Systems 2.5 V < Vin < 24 V 1.2 V < Vout < 5 V / 80 mA ORDERING INFORMATION 1 6 Vin Vout See detailed ordering and shipping information in the package dimensions section on page 17 of this data sheet. NCP716MT NCP716MTG* C C in out 1 F 1 F NC/GND* GND 23 Figure 1. Typical Application Schematic Semiconductor Components Industries, LLC, 2016 1 Publication Order Number: June, 2016 Rev. 4 NCP716/DNCP716 IN THERMAL UVLO SHUTDOWN BANDGAP MOSFET REFERENCE DRIVER WITH CURRENT LIMIT OUT EEPROM GND Figure 2. Simplified Block Diagram Table 1. PIN FUNCTION DESCRIPTION Pin No. Pin wDFN6, 2 x 2 Name Description 6 OUT Regulated output voltage pin. A small 0.47 F ceramic capacitor is needed from this pin to ground to assure stability. 2 NC/GND* No connection at NCP716MT devices. This pin can be tied to ground to improve thermal dissipation or left disconnected. *Power supply ground at NCP716MTG devices. 3, EXP GND Power supply ground. Exposed pad EXP must be tied with GND pin 3. 4 N/C No connection. This pin can be tied to ground to improve thermal dissipation or left disconnected. 5 N/C No connection. This pin can be tied to ground to improve thermal dissipation or left disconnected. 1 IN Input pin. A small capacitor is needed from this pin to ground to assure stability. Table 2. ABSOLUTE MAXIMUM RATINGS Rating Symbol Value Unit Input Voltage (Note 1) V 0.3 to 24 V IN Output Voltage V 0.3 to 6 V OUT Output Short Circuit Duration t Indefinite s SC Maximum Junction Temperature T 150 C J(MAX) Operating Ambient Temperature Range T 40 to 125 C A Storage Temperature Range T 55 to 150 C STG ESD Capability, Human Body Model (Note 2) ESD 2000 V HBM ESD Capability, Machine Model (Note 2) ESD 200 V MM Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. Refer to ELECTRICAL CHARACTERISTICS and APPLICATION INFORMATION for Safe Operating Area. 2. This device series incorporates ESD protection and is tested by the following methods: ESD Human Body Model tested per EIA/JESD22A114 ESD Machine Model tested per EIA/JESD22A115 ESD Charged Device Model tested per EIA/JESD22C101E Latch up Current Maximum Rating tested per JEDEC standard: JESD78. Table 3. THERMAL CHARACTERISTICS Rating Symbol Value Unit Thermal Characteristics, WDFN6, 2 mm x 2 mm R 120 C/W JA Thermal Resistance, JunctiontoAir www.onsemi.com 2