NOIP1SN1300A, NOIP1SN0500A, NOIP1SN0300A PYTHON 1.3/0.5/0.3 MegaPixels Global Shutter CMOS Image Sensors www.onsemi.com FEATURES PYTHON 300: 640 x 480 Active Pixels, 1/4 Optical Format PYTHON 500: 800 x 600 Active Pixels, 1/3.6 Optical Format PYTHON 1300: 1280 x 1024 Active Pixels, 1/2 Optical Format 4.8 m x 4.8 m Low Noise Global Shutter Pixels with In-pixel CDS Monochrome (SN), Color (SE) and NIR (FN) Zero ROT Mode Enabling Higher Frame Rate Frame Rate at Full Resolution (LVDS) 210/165 frames per second SXGA (Zero ROT/Normal ROT) 545/385 frames per second SVGA (Zero ROT/Normal ROT) 815/545 frames per second VGA (Zero ROT/Normal ROT) Frames Rate at Full Resolution (CMOS) PYTHON 1300: 43 Frames per Second Onchip 10bit AnalogtoDigital Converter (ADC) Figure 1. PYTHON 1300 8bit or 10bit Output Mode Four/Two/One Low Voltage Differential Signaling (LVDS) High Speed Serial Outputs or Parallel CMOS Output Random Programmable Region of Interest (ROI) Readout support correlated double sampling (CDS) readout, Serial Peripheral Interface (SPI) reducing noise and increasing dynamic range. Automatic Exposure Control (AEC) The image sensors have onchip programmable gain Phase Locked Loop (PLL) amplifiers and 10bit A/D converters. The integration time High Dynamic Range (HDR) up to 90 dB and gain parameters can be reconfigured without any visible Dual Power Supply (3.3 V and 1.8 V) image artifact. Optionally the onchip automatic exposure 40C to +85C Operational Temperature Range control loop (AEC) controls these parameters dynamically. The images black level is either calibrated automatically or 48pin LCC and Bare Die can be adjusted by adding a user programmable offset. 620 mW Power Dissipation (LVDS) A high level of programmability using a four wire serial 420 mW Power Dissipation (CMOS) peripheral interface enables the user to read out specific These Devices are PbFree and are RoHS Compliant regions of interest. Up to eight regions can be programmed, APPLICATIONS achieving even higher frame rates. The image data interface of the P1SN/SE/FN devices Machine Vision consists of four LVDS lanes, facilitating frame rates up to Motion Monitoring 210 frames per second in Zero ROT mode. Each channel Security runs at 720Mbps. A separate synchronization channel Barcode Scanning (2D) containing payload information is provided to facilitate the image reconstruction at the receiving end. The P2SN/SE DESCRIPTION devices provide a parallel CMOS output interface at reduced The PYTHON 300, PYTHON 500, and PYTHON 1300 frame rate. image sensors utilize high sensitivity 4.8 m x 4.8 m pixels The devices are provided in a 48pin LCC package and that support low noise pipelined and triggered global are available in monochrome, Bayer color, and extended shutter readout modes. In global shutter mode, the sensors nearinfrared (NIR) configurations. Semiconductor Components Industries, LLC, 2015 1 Publication Order Number: November, 2015 Rev. 0 NOIP1SN1300A/DNOIP1SN1300A, NOIP1SN0500A, NOIP1SN0300A ORDERING INFORMATION Part Number Description Package PYTHON 1300 NOIP1SN1300AQDI 1.3 Megapixel, Monochrome, Microlens, LVDS Output 48pin LCC NOIP1SE1300AQDI 1.3 Megapixel, Bayer Color, Microlens, LVDS Output NOIP1FN1300AQDI 1.3 Megapixel, Monochrome with enhanced NIR, Microlens, LVDS Output NOIP2SN1300AQDI 1.3 Megapixel, Monochrome, Microlens, CMOS (parallel) Output NOIP2SE1300AQDI 1.3 Megapixel, Bayer Color, Microlens, CMOS (parallel) Output NOIP1SN1300AQTI 1.3 Megapixel, Monochrome, Microlens, LVDS Output, Protective Foil NOIP1SE1300AQTI 1.3 Megapixel, Bayer Color, Microlens, LVDS Output, Protective Foil NOIP1FN1300AQTI 1.3 Megapixel, Monochrome with enhanced NIR, Microlens, LVDS Output, Protective Foil PYTHON 500 NOIP1SN0500AQDI 0.5 Megapixel, Monochrome, Microlens, LVDS Output 48pin LCC NOIP1SE0500AQDI 0.5 Megapixel, Bayer Color, Microlens, LVDS Output NOIP1FN0500AQDI 0.5 Megapixel, Monochrome with enhanced NIR, Microlens, LVDS Output NOIP1SN0500AQTI 0.5 Megapixel, Monochrome, Microlens, LVDS Output, Protective Foil NOIP1SE0500AQTI 0.5 Megapixel, Bayer Color, Microlens, LVDS Output, Protective Foil NOIP1FN0500AQTI 0.5 Megapixel, Monochrome with enhanced NIR, Microlens, LVDS Output, Protective Foil PYTHON 300 NOIP1SN0300AQDI 0.3 Megapixel, Monochrome, Microlens, LVDS Output 48pin LCC NOIP1SE0300AQDI 0.3 Megapixel, Bayer Color, Microlens, LVDS Output NOIP1FN0300AQDI 0.3 Megapixel, Monochrome with enhanced NIR, Microlens, LVDS Output NOIP1SN0300AQTI 0.3 Megapixel, Monochrome, Microlens, LVDS Output, Protective Foil NOIP1SE0300AQTI 0.3 Megapixel, Bayer Color, Microlens, LVDS Output, Protective Foil NOIP1FN0300AQTI 0.3 Megapixel, Monochrome with enhanced NIR, Microlens, LVDS Output, Protective Foil The P1SN/SE base part is used to reference the mono, color and NIR enhanced versions of the LVDS interface the P2SN/SE base part is used to reference the mono, color and NIR enhanced versions of the CMOS interface. More details on the part number coding can be found at