DATA SHEET Solid-State Relays Form 0859-140801 Solid-State Relays Features Rugged, epoxy encapsulation construction Opto 22 Power 4,000 volts of optical isolation Series SSR Subjected to full load test and six times the rated improvements and the same 100% testing policy established current surge before and after encapsulation over 30 years ago, Opto 22 is still recognized today for the very Unique heat-spreader technology high quality and reliability of all our solid-state relays. Guaranteed for life Description Overview Opto 22 offers a complete line of SSRs, from the rugged 120/ 240/380-volt AC Series to the small footprint MP Series, In 1974, Opto 22 introduced the first liquid epoxy-filled line of designed for mounting on printed circuit boards. All Opto 22 power solid-state relays (SSR). This innovation in SSR design SSRs feature 4,000 volts of optical isolation, and most are UL greatly improved the reliability and reduced the cost of and CSA recognized. The innovative use of room-temperature manufacturing. At that time, we also incorporated into our liquid epoxy encapsulation, coupled with Opto 22s unique manufacturing process 100% testing under full load heat-spreader technology, are key to mass producing the conditions of every relay we produced. worlds most reliable solid state relays. By 1978, Opto 22 had gained such a reputation for reliability Every Opto 22 solid state relay is subjected to full load test and that we were recognized as the worlds leading manufacturer six times the rated current surge both before and after of solid-state relays. Through continuous manufacturing Part Numbers Part Description Part Description AC Switching AC Switching 575D15-12 575 VAC, 15 Amp, DC Control, Transient Proof 120A10 120 VAC, 10 Amp, AC Control 575D45-12 575 VAC, 45 Amp, DC Control, Transient Proof 120A25 120 VAC, 25 Amp, AC Control 575 VAC, 30 Amp, DC Control, Transient Proof, 240A10 240 VAC, 10 Amp, AC Control 575D30-HS with integrated heatsink 240A25 240 VAC, 25 Amp, AC Control 575 VAC, 45 Amp, DC Control, Transient Proof, 575Di45-12 240A45 240 VAC, 45 Amp, AC Control with LED Indicators 120D3 120 VAC, 3 Amp, DC Control MP120D2 120 VAC, 2 Amp, DC Control. 120D10 120 VAC, 10 Amp, DC Control or P120D2 P model is low profile. 120D25 120 VAC, 25 Amp, DC Control MP120D4 120 VAC, 4 Amp, DC Control. or P120D4 P model is low profile. 120D45 120 VAC, 45 Amp, DC Control MP240D2 240 VAC, 2 Amp, DC. 240D3 240 VAC, 3 Amp, DC Control or P240D2 P model is low profile. 240D10 240 VAC, 10 Amp, DC Control MP240D4 240 VAC, 4 Amp, DC. 240 VAC, 10 Amp, DC Control, with LED Indica- or P240D4 P model is low profile. 240Di10 tors MP380D4 380 VAC, 4 Amp, DC 240D25 240 VAC, 25 Amp, DC Control Z120D10 Z Model, 120 VAC, 10 Amp, DC Control 240 VAC, 25 Amp, DC Control, with LED Indica- 240Di25 Z240D10 Z Model, 240 VAC, 10 Amp, DC Control tors 240 VAC, 30 Amp, DC Control, with integrated 240D30-HS DC Switching heatsink 240D45 240 VAC, 45 Amp, DC Control DC60P or 60 VDC, 3 Amp, DC Control. DC60MP P model is low profile. 240 VAC, 45 Amp, DC Control, with LED Indica- 240Di45 tors DC200P or 200 VDC, 1 Amp, DC Control. DC200MP P model is low profile. 380D25 380 VAC, 25 Amp, DC Control DC60S-3 60 VDC, 3 Amp, DC Control 380D45 380 VAC, 45 Amp, DC Control DC60S-5 60 VDC, 5 Amp, DC Control 480D10-12 480 VAC, 10 Amp, DC Control, Transient Proof 480D15-12 480 VAC, 15 Amp, DC Control, Transient Proof 480D25-12 480 VAC, 25 Amp, DC Control, Transient Proof Accessories 480 VAC, 25 Amp, DC Control, Transient Proof, SAFETY COVER Power Series SSR safety cover 480D25-HS with integrated heatsink SSR-HS Power Series SSR heatsink 480D45-12 480 VAC, 45 Amp, DC Control, Transient Proof SSR-THERMOPAD Thermal conductive pad (pack of 10) Opto 22 43044 Business Park Drive Temecula, CA 92590-3614 www.opto22.com PAGE SALES 800-321-6786 951-695-3000 FAX 951-695-3095 sales opto22.com SUPPORT 800-835-6786 951-695-3080 FAX 951-695-3017 support opto22.com 1 20062014 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.Solid-State Relays encapsulation. This double testing of every part before it MP Series leaves the factory means you can rely on Opto 22 solid state The MP Series packaging is designed with a minimum relays. All Opto 22 SSRs are guaranteed for life. footprint to allow maximum relay density on the printed Accessories for the Power-Series SSRs include a safety cover, circuit board. heatsink, and a matching thermal conductive pad. See page 3. P Series The P Series power relays provide low-profile 0.5 in. Power Series SSRs (12.7 mm) center mounting on printed circuit boards. Opto 22 provides a full range of Power Series relays with a wide HS Series SSRs variety of voltage (120575 volts) and current options (345 amps). The HS Series features an integrated All Power Series relays feature 4,000 heatsink, which makes themsocool. volts of optical isolation and have a These relays have less thermal high PRV rating. Some Power Series resistance inside, so heat dissipates relays include built-in LEDs to more easily than in a standard SSR indicate operation. mounted to the same heatsink. With See page 4. the heatsink built-in, you don t have to select one from a catalog, and DC Series installation is much easier.Includes a The DC Series delivers isolated DC control to large OEM DIN-rail adapter. See page 13. customers worldwide. All DC control SSRs are LS TTL compatible. Specifications AC Series (all Power Series models) The AC Series offers the ultimate in solid state reliability. All AC 4,000 V optical isolation, input to output Power Series relays feature a built-in snubber as well as zero- Zero voltage turn-on voltage turn-on and zero-current turn-off. Transient-proof Zero-current turn-off models offer self protection for noisy electrical environments. Turn-on time: 0.5 cycle maximum Turn-off time: 0.5 cycle maximum Z Series SSRs Operating temperature: 40 C to 100 C The Z Series employs a unique heat Operating frequency: 25 to 65 Hz transfer system that makes it (operates at 400 Hz with six times off-state leakage) possible for Opto 22 to deliver a Coupling capacitance, input to output: 8 pF maximum low-cost, 10-amp, solid state relay Hermetically sealed in an all-plastic case. The push-on, tool-free quick-connect terminals DV/DT Off-state: 200 volts per microsecond make the Z Series ideal for high- DV/DT commutating: snubbed for rated current at volume OEM applications. 0.5 power factor Operating temperature: 40 C to UL recognized 100 C. See page 7. CSA certified CE component Printed Circuit Series SSRs Torque specs for screws (this spec is both the Opto 22s Printed Circuit Series recommended torque and the maximum torque you allows OEMs to easily deploy solid should use): state relays on printed circuit Control terminals, 10 in-lb (1.13 N-m) boards. Two unique packages are Field terminals, 18 in-lb (2.03 N-m) available, both of which will switch loads up to four amps. Operating temperature: 40 C to 100 C. See page 9. Opto 22 43044 Business Park Drive Temecula, CA 92590-3614 www.opto22.com PAGE SALES 800-321-6786 951-695-3000 FAX 951-695-3095 sales opto22.com SUPPORT 800-835-6786 951-695-3080 FAX 951-695-3017 support opto22.com 2 20062014 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Solid-State Relays Form 0859-140801