1.6 x 1.5 x 0.5mm Red & Pure green & Blue 1.6 x 1.5 x 0.5mm Red & Pure green & Blue SSMMDD OSTB0603C1C VER A.3 Features Outline Dimension Full-Color Back Top Recommended Pad Super high brightness of surface mount LED Water Clear Flat Mold Compact package outline (LxWxT) of 1.6mm x 1.5mm x 0.5mm Compatible to IR reflow soldering. Side Blue Cathode Applications Backlighting (switches, keys, etc.) Pure Green Cathode Common Anode Marker lights (e.g. steps, exit ways, etc.) Red Cathode Notes: 1. All dimensions are in millimeters 2. Tolerance is 0.10 mm unless otherwise noted. Absolute Maximum Rating ((((TTTTaaaa====22225555)))) Directivity Symbo Value 0 Item Unit l G/B Red DC Forward Current IF 30 30 mA Pulse Forward Current* IFP 100 100 mA Reverse Voltage V VR 5 5 0 Power Dissipation mW PD 78 108 Operating Temperature Topr -40 ~ +85 Storage Temperature Tstg -40~ +85 Lead Soldering Temperature - Tsol 260/5sec *Pulse width Max 0.1ms, Duty ratio max 1/10 Electrical -Optical Characteristics ((((TTTTaaaa====22225555)))) 21/2(deg) VF (V) IR(A) Iv(mcd) D(nm) Min. Typ. Max. Max. Min. Typ. Max. Min. Typ. Max. Typ. Part Number Color I =5mA V =5V I =5mA F R F Blue BL 2.6 2.8 3.4 10 30 - 70 465 470 475 120 Pure Green PG 2.4 2.6 3.4 10 80 - 160 520 525 530 120 OSTB0603C1C Red HR 10 20 - 60 620 625 630 120 1.6 2.0 2.4 Note: * Vf tolerance: 0.05V * Dominant wavelength tolerance: 1nm * Luminous intensity is NIST reading. Luminous intensity tolerance:10% LED & Application Technologies 1.6 x 1.5 x 0.5mm Red & Pure green & Blue 1.6 x 1.5 x 0.5mm Red & Pure green & Blue SSMMDD OSTB0603C1C VER A.3 Recommended Soldering Temperature Time Profile (Reflow Soldering) Surface Mounting Condition In automatic mounting of the SMD LEDs on printed circuit boards, any bending, expanding and pulling forces or shock against the SMD LEDs should be kept min. to prevent them from electrical failures and mechanical damages of the devices. Soldering Reflow -Soldering of the SMD LEDs should conform to the soldering condition in the individual specifications. -SMD LEDs are designed for Reflow Soldering. -In the reflow soldering, too high temperature and too large temperature gradient such as rapid heating/cooling may cause electrical & optical failures and damages of the devices. -We cannot guarantee the LEDs after they have been assembled using the solder dipping method. LED & Application Technologies