Technical OPTOTRONIC OT 80/220-240/24 DIM P Information Dimmable Constant Voltage LED Power Edition: October 2011 subject to change Supply for 24V LED Modules Technical data Reference: OT 80/220-240/24 DIM P For LED modules: 24V LED Modules with respect to the output parameters Line voltage, nominal: 220 240 V AC Line current, nominal: 0,4A 230 V Line frequency: 50/60 Hz Protection Class: II Output voltage: 24V DC Tolerance: - 0,5V / + 1,0V (Remark) Maximum load 80 W Power factor: > 0,95 full load 230V > 0,90 half load 230V Power losses: 12 W max. Interface: 110V ECG efficiency: 87 % 230V (Remark) full load at 230 V Power loss in no load condition: < 1,5 W (Remark) < 1,5 W (Stand by power consumption 110V) Input Voltage: 198 - 264 V AC (Remark) Permitted Voltage Range DC voltage operation: No Inrush current: 35 A (Remark) t 360s width Max. no. of ECG circuit 7 breakers 10 A (B type): Max. no. of ECG circuit 10 breakers 16 A (B type): Ambient temperature range, t : -25 C to +55 C a Max. case temperature at t point: 80C c ECG Life time: 50.000h (Remark) at tcase = 70 C at tc point and 10% failure rate Maximum casing temperature in 100C case of fault: Dimmable: PWM dimming via fully isolated 1.10V Interface By external resistor or active 1.10V Dimming Range: 1.100% No-load proof: Yes Short circuit protection: Automatic, reversible Overload protection: Automatic, reversible Overheating protection: Automatic, reversible 20111020 Page 1 of 3 AA328400055 Technical OPTOTRONIC OT 80/220-240/24 DIM P Information Dimmable Constant Voltage LED Power Edition: October 2011 subject to change Supply for 24V LED Modules Wire cross section Input: 1,0 mm / Output: 1,5 mm input/ouput line: Input: 18 AWG / Output: 18 AWG (Remark) Flexible Cable length: ~ 300 mm / ~ 300 mm Input side / Output side: Input colour coding: L: brown N: blue Output colour coding: LEDModule (+): red LEDModule (-): black LEDModule (PWM): white Control colour coding: Dimming (+): violet Dimming (-): grey Wire stripping: 10 mm Max. output cable length: 10 m Geometry (l x b x h mm) 250 x 50 x 34 mm Side mounting hole spacing/length: 241 mm Side mounting hole spacing/width 12 mm Bottom mounting hole spacing/length: 241 mm Bottom mounting hole spacing/width: 14 mm (Remark) From each side Weight: 900 g Casing: Metal, aluminium IP Code: IP67 Suitable for fixtures with II protection class: ECG outdoor protection against PCB fully encapsulated + dust proof metal humidity: housing Safety: IEC 61347-1, IEC 61347-2-13 Performance: IEC 62384 Radio interference: CISPR 15 Harmonic content: IEC 61000-3-2 Voltage fluctuations: IEC 61000-3-3 Immunity: IEC 61547 Vibration tested: Yes Surge: L-N: 3kV Galvanic insulation between 3,75 kV , rms primary and secondary side: (Remark) SELV - equivalent Approvals: 20111020 Page 2 of 3 AA328400055