ROCKER SWITCHES K5 SEALED ROCKERS SEALED, ILLUMINATED ROCKER SWITCHES ATTRACTIVE & RUGGED FOR WET & DUSTY ENVIRONMENTS The OTTO K5 series is a quality, precision switch designed to comply with standards established for appliance, marine (ignition protection) and off-road vehicles along with other demanding applications where rugged rocker switches are required. K5 series sealed rocker switches snap into industry-standard panel cutouts. Choose illuminated and printed legends, thru- panel drain option and switching compatibility from low level up to 20 amps. The K5 series offers a choice of LED, incandescent and neon illumination. Legends can be stamped onto a non-illuminated button, stamped onto an illuminated lens or laser etched into the lens and backlit. Available in standard and low level contact ratings, the K5 rockers will fit a wide range of applications. Expect a minimum Raised Bars Shown of 25,000 cycles at a full rated load of 20 amps resistive or 15 amps inductive. 100,000 cycles mechanical. A full complement of switch operation is available including Standard Characteristics/Ratings: momentary and maintained action in 2 or 3-position switches in SPST, SPDT, SPTT, DPST and DPDT circuit arrangements. ELECTRICAL RATINGS: Load Sea Level Sea Level OTTO can provide custom colors upon request. Value-added 28VDC 115VAC, 60/400Hz assemblies with wire leads are also available. Please consult the Resistive 20A 16A factory for assistance. Inductive 15A 15A Lamp 5A 5A Motor 0.5HP 110VAC Features: DWV 1050Vrms except across light terminals Sealed watertight per IP68S and IP69K Low Level 10mA 30mV Snap-in panel mounting into industry standard Electrical Life: 25,000 cycles panel cutout LIGHTING: Optional panel seal gasket Light Source Rating LED, neon & incandescent lighting Incandescent (VDC) 6V, 12V, 24V 0.250 Quick Connect terminals Neon (VAC) 125V, 250V LED (VDC) 2V, 6V, 12V, 24V Optional one-piece connector Mechanical Life: 100,000 cycles Optional terminal barriers Seal: IP68S and IP69K Low level up to 20 amp switch Operating Temp Range: -40C to +85C Configurable Single Pole Triple Throw (SPTT) MATERIALS: with external jumpers Case: Thermoplastic Soft Touch button available Button: Thermoplastic Terminals/Contact: Brass, silver alloy with silver plate, gold flash for low level RoHS/WEEE/Reach compliant Terminal Hardware: K5 series recommended Quick Connect terminals: AMP 60253-2 for 12-16 AWG AMP 42100-2 for 14-18 AWG Mounting Hardware: None provided Specifications Subject To Change Without Notice www.ottoexcellence.com 177K5 SEALED ROCKERS SEALED, ILLUMINATED ROCKER SWITCHES SNAP-IN PANEL MOUNTING K5 SERIES PART NUMBER CODE Part Number Code Continued Below K5 X X X X XX X X Base Options Rocker Color*/Style Rocker Features Switch Action/Circuit Light Source Type Light Circuit A. With Keying Pin Only A. Black Plastic Rocker Position Position Position Position Position Circuit A. No Illumination Circuit Terminal Standard Rating B. BlackSoft Touc Rocker A C A B C B. 6V Incandescent Connections Silver Plate C. Red Plastic Rocker 1. No Feature 1. No Feature 1A. 3-4 NONE OFF SPST C. 12V Incandescent A. NONE NONE B. Without Barriers or Pin D. RedSoft Touc Rocker 2. Lens 2. Lens 2A. 3-4/8-9 NONE OFF DPST D. 24V Incandescent B. Dep. in A 1(-) & 4(+) Standard Rating E. White Plastic Rocker 3. Raised Bars 3. Raised Bars 1B. 3-4 NONE 3-2 SPDT E. 125VAC Neon C. Dep. in C 2(+) & 5(-) Silver Plate F. WhiteSoft Touc Rocker 4. Raised Lit Bars 4. Raised Lit Bars 2B. 3-4/8-9 NONE 3-2/8-7 DPDT F. 250VAC Neon D. Ind. in A 1(-) & 6(+) C. With Terminal H. Green Plastic Rocker 1C. (3-4) NONE OFF SPST G. 2V Red LED E. Ind. in C 5(-) & 10(+) NOTE: Soft Touch rockers Barriers Only J. Orange Plastic Rocker 2C. (3-4)/(8-9) NONE OFF DPST H. 2V Green LED F. Dep. in A 1(-) & 4(+) require same color lenses/ Standard Rating K. Blue Plastic Rocker 1D. (3-4) NONE 3-2 SPDT J. 2V Amber LED Dep. in C 2(+) & 5(-) lit bars for both positions. Silver Plate L. GraySoft Touc Rocker 2D. (3-4)/(8-9) NONE 3-2/8-7 DPDT K. 6V Red LED G. Dep. in A 1(-) & 4(+) D. With Keying Pin Only M. Gray Plastic Rocker 1E. (3-4) OFF (3-2) SPDT L. 6V Green LED Ind. in C 5(-) & 10(+) Low Level Rating 2E. (3-4)/(8-9) OFF (3-2)/(8-7) DPDT M. 6V Amber LED H. Ind. in A 1(-) & 6(+) Gold Plate 1F. 3-4 OFF 3-2 SPDT N. 12V Red LED Dep. in C 2(+) & 5(-) E. Without Barriers or Pin 2F. 3-4/8-9 OFF 3-2/8-7 DPDT P. 12V Green LED J. Ind. in A 1(-) & 6(+) *Additional colors available. Low Level Rating 1G. (3-4) OFF 3-2 SPDT Q. 12V Amber LED Ind. in C 5(-) & 10(+) Contact factory. Gold Plate 2G. (3-4)/(8-9) OFF 3-2/8-7 DPDT R. 24V Red LED POS. A NOTE: Polarity only applies F. With Terminal S. 24V Green LED to LED circuits. Barriers Only Special Circuits T. 24V Amber LED Low Level Rating Position Position Position Special Gold Plate A B C Circuits POS. B G. With Keying Pin Only 1H. 3-4/8-9 8-9 OFF ON/ON/OFF Standard Rating 1J. 3-4/8-9 8-9 NONE ON/ON/NONE No Plate 1K. (3-4)/(8-9) 8-9 OFF (ON)/ON/OFF H. Without Barrier or Pin 1L. (3-4)/(8-9) 8-9 NONE (ON)/ON/NONE Standard Rating 1M. 3-4/8-9 3-2/8-9 3-2/8-7 ON/ON/ON POS. C No Plate 1N. (3-4)/(8-9) 3-2/8-9 3-2/8-7 (ON)/ON/ON J. With Terminal 1P. (3-4)/(8-9) 3-2/8-9 (3-2)/(8-7) (ON)/ON/(ON) Barriers Only 2R. 3-4/8-9 OFF/8-9 OFF/OFF ON/OFF/OFF Standard Rating ON/ON/OFF No Plate 2S. (3-4)/8-9 OFF/8-9 OFF/OFF (ON)/OFF/OFF ON/ON/OFF NOTE: All code combinations are not feasible. NOTE: ( ) denotes momentary action. Consult factory for product availability. K5 PART NUMBER CODE - CONTINUED FROM ABOVE X X XX XX X X X Lens Color Legend Style Legend Color Legend Orientation Position A Position C Position A Position C Position A Position C Position Position 1. Transparent Red 1. Transparent Red ZZ. No Legend ZZ. No Legend 1. Red 1. Red A C 2. Transparent Green 2. Transparent Green 2. Black 2. Black 3. Transparent Amber 3. Transparent Amber 9. White 9. White 1. Std. 4. Clear 4. Clear B. Backlight/ B. Backlight/ NOTE: For all other legend options, 5. Translucent White 5. Translucent White Daylight White Daylight White refer to the legend table on page 164, Z. No Lens Z. No Lens D. Backlight/ D. Backlight/ find the two digit code and enter the 2. 90 Deadfront Deadfront code in the appropriate position(s). Z. No Legend Z. No Legend NOTE: It is not recommended to use green LEDs with translucent white lenses. This will reduce light intensity. STOP HERE for 3. 180 Only available on Rocker Style A Use clear lenses with green LEDs for lighted switches & Rocker Features 1 and lens maximum light intensity. without legends. color Z for each position. Recommended for neon lamps. Special Order: Ultra bright green 4. 270 Example: LEDs to be used with translucent K5AA331FNH-44 white lens83 1.00 K5 Connector P/N 801775-2A Without Latches STOP HERE for P/N 801775-2B With Latches unlighted switches without legends. Recommended Quick Connect Terminals 1.276 AMP 60253-2 for 12-16 AWG Example: .007 AMP 42100-2 for 14-18 AWG K5AA331BAA Panel Seal Gasket P/N 807109 .046 TYP. K5 panel plugs available as shown on page 167. 178 OTTO Full Line Catalog Specifications Subject To Change Without Notice