32SEQP18M Panasonic

Conductive Polymer Aluminum Solid Capacitors Radial Lead Type SEQP series Features High voltage (32 V max.) 125 1000 h RoHS compliance, Halogen free Specifications Size code C6 E7 E12 F8 F13 Category temp. range 55 to +125 Rated voltage range 4.0 V to 20 V 4.0 V to 32 V 4.0 V to 20 V Nominal cap.range 22 F to 150 F 6.8 F to 330 F 18 F to 560 F 15 F to 680 F 150 F to 1200 F Capacitance tolerance 20 % (120 Hz / +20 ) DC leakage current Please see the attached characteristics list Dissipation factor (tan ) Please see the attached characteristics list +125 1000 h / +105 5000 h, rated voltage applied Capacitance change Within 20 % of the initial value Endurance Dissipation factor (tan) 200 % of the initial limit DC leakage current Within the initial limit +60 , 90 % to 95 % RH, 1000 h, No-applied voltage Capacitance change Within 20 % of the initial value Damp heat (Steady state) Dissipation factor (tan) 150 % of the initial limit DC leakage current Within the initial limit (after voltage processing) Marking Dimensions (not to scale) d Polarity marking () Lot No. Series code* 15 min. 4 min. 19 min. L Unit R. capacitance Size code D0.5 L max. F0.5 d0.05 R. voltage (F) (V) C6 6.3 6.0 2.5 0.45 E7 8.0 7.0 3.5 0.45 E12 8.0 12.0 3.5 0.6 F8 10.0 8.0 5.0 0.5 * Depends on the case size. F13 10.0 13.0 5.0 0.6 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01-Nov-15 D FSEQP series Characteristics list Case size Specifications (mm) Part number Rated Rated capacitance Size Allowable voltage Ripple *2 *4 code ripple Click here for part number (20 %) ESR *3 LC *1 (V) D L tan current *1 list of lead terminal cutting (F) (m max.) (A) current and lead terminal taping (mA rms) (mA rms) 150 6.3 6.0 C6 572 1810 40 0.12 300 4SEQP150M 330 8.0 7.0 E7 810 2560 35 0.12 660 4SEQP330M 4.0 560 8.0 12.0 E12 1430 4520 13 0.15 448 4SEQP560M 680 10.0 8.0 F8 1170 3700 25 0.12 544 4SEQP680M 1200 10.0 13.0 F13 1721 5440 12 0.18 960 4SEQP1200M 82 6.3 6.0 C6 537 1700 45 0.12 258 6SEQP82M 150 8.0 7.0 E7 810 2560 35 0.12 472 6SEQP150M 6.3 330 10.0 8.0 F8 1170 3700 25 0.12 416 6SEQP330M 470 8.0 12.0 E12 1332 4210 15 0.15 592 6SEQP470M 820 10.0 13.0 F13 1721 5440 12 0.15 775 6SEQP820M 56 6.3 6.0 C6 537 1700 45 0.12 280 10SEQP56M 120 8.0 7.0 E7 810 2560 35 0.12 600 10SEQP120M 10 270 10.0 8.0 F8 1170 3700 25 0.12 540 10SEQP270M 330 8.0 12.0 E12 1250 3950 17 0.15 660 10SEQP330M 560 10.0 13.0 F13 1655 5230 13 0.15 840 10SEQP560M 39 6.3 6.0 C6 512 1620 50 0.10 312 16SEQP39M 82 8.0 7.0 E7 670 2120 40 0.12 656 16SEQP82M 16 150 10.0 8.0 F8 955 3020 30 0.12 480 16SEQP150M 180 8.0 12.0 E12 1151 3640 20 0.15 576 16SEQP180M 330 10.0 13.0 F13 1493 4720 16 0.15 792 16SEQP330M 22 6.3 6.0 C6 458 1450 60 0.10 220 20SEQP22M 47 8.0 7.0 E7 598 1890 45 0.12 470 20SEQP47M 20 68 10.0 8.0 F8 759 2400 40 0.12 272 20SEQP68M 100 8.0 12.0 E12 1050 3320 24 0.15 400 20SEQP100M 150 10.0 13.0 F13 1367 4320 20 0.15 600 20SEQP150M 6.8 8.0 7.0 E7 440 1400 100 0.10 44 32SEQP6R8M 32 15 10.0 8.0 F8 560 1800 80 0.10 96 32SEQP15M 18 8.0 12.0 E12 790 2500 50 0.12 115 32SEQP18M *1: Ripple current (100 kHz / +105 < Tx +125 ) / Allowable ripple current (100 kHz / Tx +105 ) *2: ESR100 kHz to 300 kHz / +20 *3: tan (120 Hz / +20 ) *4: After 2 minutes Please refer to each page in this catarog for Flow conditions and Taping specifications. Frequency correction factor for ripple current Frequency(f) 120 Hz f < 1 kHz 1 kHz f < 10 kHz 10 kHz f < 100 kHz 100 kHz f < 500 kHz Coefficient 0.05 0.3 0.7 1 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01-Nov-15