CJ (ACJ) COMPACT SLIM TWIN AND SINGLE TYPE CJ RELAYS (ACJ) AUTOMOTIVE RELAY FEATURES TYPICAL APPLICATIONS It is extremely compact at approx. 2/3 Powered windows the size of previous products. Automatic door locks Compared to our previous miniature Electrically powered mirrors type CT relay, both the 1 Form C and Powered sunroofs 10-pin and 8-pin twin types take up Powered seats approx. two-thirds the space and Lift gates volume. This makes them ideal for relay Smart J/B related products, etc. unit miniaturization. Compact and high-capacity 25 A load switching High capacity control is possible while being compact and capable of motor lock load switching at 25 A, 14 V DC. Pin in Paste* compatible model added Models compatible with the recently increasing Pin in Paste technique (reflow solder mounting) have been added. Pin in Paste compatible models are the flux tight type. * The Pin in Paste method may sometimes be referred to as THR (Through-hole Reflow). Environmental protection specifications Cadmium-free contacts and use of lead- free solder are standard. Environmental pollutants are not used. ORDERING INFORMATION ACJ Contact arrangement 1: 1 Form C 2: 1 Form C2 (8 terminal) 5: 1 Form C2 (10 terminal) Pick-up voltage 1: Max. 6.5 V DC 2: Max. 7.2 V DC Coil voltage, DC 12: 12 V Mounting type Nil: Standard type P: Pin in Paste available type TYPES Part No. Pick-up voltage Contact arrangement Nominal coil voltage (at 20 C 68 F) Standard type Pin in Paste type Max.6.5 V DC (Initial) ACJ1112 ACJ1112P 1 Form C Max.7.2 V DC (Initial) ACJ1212 ACJ1212P Max.6.5 V DC (Initial) ACJ2112 ACJ2112P 1 Form C 2 12 V DC (8 terminal) Max.7.2 V DC (Initial) ACJ2212 ACJ2212P Max.6.5 V DC (Initial) ACJ5112 ACJ5112P 1 Form C 2 (10 terminal) Max.7.2 V DC (Initial) ACJ5212 ACJ5212P Standard packing Carton (tube): 70 pcs. Case: 2,800 pcs. (1 Form C), Carton (tube): 40 pcs. Case: 1,000 pcs. (8 terminal), Carton (tube): 35 pcs. Case: 1,400 pcs. (10 terminal) ds 61215 en cj: 010113D 1CJ (ACJ) RATING 1. Coil data Nominal operating Nominal operating Nominal coil Pick-up voltage Drop-out voltage Coil resistance current power Usable voltage range* voltage (at 20C 68F) (at 20C 68 F) 10% (at 20 C 68F) 10% (at 20 C 68F) (at 20 C 68 F) Max. 7.2 V DC Min. 1.0 V DC 53.3 mA 225 640 mW 10 to 16 V DC (Initial) (Initial) 12 V DC Max. 6.5 V DC Min. 0.8 V DC 66.7 mA 180 800 mW 9 to 16 V DC (Initial) (Initial) * Other usable voltage range types are also available. Please contact us for details. 2. Specifications Characteristics Item Specifications Arrangement 1 Form C, 1 Form C 2 Contact Contact resistance (Initial) N.O.: Typ7m, N.C.: Typ10m (By voltage drop 6 V DC 1 A) Contact material Ag alloy (Cadmium free) Standard type: Sealed type Protective construction Pin in Paste type: Flux tight type Nominal switching capacity (resistive load) N.O.: 20A 14V DC, N.C.: 10A 14V DC Max. carrying current (14V DC) N.O.: 20 A for 1 hour, 30 A for 2 minutes (at 20C 68F) (when coil powered on one side) Rating Nominal operating power 640 mW (for pick-up voltage max. 7.2 V DC), 800 mW (for pick-up voltage max. 6.5 V DC) 1 Min. switching capacity (resistive load)* 1A 14V DC Initial insulation resistance Min. 100 M (at 500V DC, Measurement at same location as Breakdown voltage section.) Between open contacts 500 Vrms for 1 min. (Detection current: 10mA) Breakdown Electrical voltage (Initial) Between contacts and coil 500 Vrms for 1 min. (Detection current: 10mA) characteristics Operate time (at nominal voltage) Max. 10ms (at 20 C 68 F, excluding contact bounce time) (Initial) Release time (at nominal voltage) Max. 10ms (at 20 C 68 F, excluding contact bounce time) (Initial) 2 Functional Min. 100 m/s 10G (Half-wave pulse of sine wave: 11ms detection time: 10s) Shock resistance 2 Destructive Min. 1,000 m/s 100G (Half-wave pulse of sine wave: 6ms) Mechanical 2 Functional 10 Hz to 100 Hz, Min. 44.1m/s 4.5G (Detection time: 10 s) characteristics Vibration 2 10 Hz to 500 Hz, Min. 44.1m/s 4.5G resistance Destructive Time of vibration for each direction X, Y direction: 2 hours, Z direction: 4 hours 7 Mechanical Min. 10 (at 120 cpm) Standard type <Resistive load> 5 Min. 10 (at nominal switching capacity, operating frequency: 1s ON, 9s OFF) <Motor load> 5 5 N.O. side: Min. 210 : at 25 A (inrush), 5 A (steady), 14 V DC Min. 10 : at 25 A 14 V DC (Motor lock) Expected life 5 N.C. side: Min. 210 : at 20 A 14 V DC (brake) (Operating frequency: 0.5s ON, 9.5s OFF) Electrical Pin in Paste type <Resistive load> 5 Min. 10 (at nominal switching capacity, operating frequency: 1s ON, 9s OFF) <Motor load> 5 4 N.O. side: Min. 10 : at 25 A (inrush), 5 A (steady), 14 V DC Min. 510 : at 25 A 14 V DC (Motor lock) 5 N.C. side: Min. 10 : at 20 A 14 V DC (brake) (Operating frequency: 0.5s ON, 9.5s OFF) Conditions for operation, transport and Ambient temperature: 40 C to +85C 40 F to +185F 2 storage* Humidity: 5% R.H. to 85% R.H. (Not freezing and condensing at low temperature) Conditions Max. operating speed 6 cpm (at nominal switching capacity) Mass 1 Form C type: approx. 3.5 g .12 oz, Twin type: approx. 6.5 g .23 oz Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. *2. The upper operation ambient temperature limit is the maximum temperature that can satisfy the coil temperature rise value. Refer to 6. Usage, Storage and Transport Conditions in AMBIENT ENVIRONMENT section in Relay Technical Information. Please inquire if you will be using the relay in a high temperature atmosphere (110 C 230 F). *3. Depends on connection conditions. Also, this does not guarantee repeated switching. We recommend that you confirm operation under actual conditions. If the relay is used continuously for long periods of time with coils on both sides in an energized condition, breakdown might occur due to abnormal heating depending on the carrying condition. Therefore, please inquire when using with a circuit that causes an energized condition on both sides simultaneously. 2 ds 61215 en cj: 010113D