Automation Controls Catalog SOCKETS AND DIN RAIL ACCESSORIES TERMINAL SOCKET FOR HN RELAY TYPES Type No. of poles Item Part No. 1-pole HN1 PC board terminal socket AHNA13 PC board terminal socket 2-pole HN2 PC board terminal socket AHNA23 1-pole HN1 DIN rail terminal socket AHNA11K DIN rail terminal socket 2-pole HN2 DIN rail terminal socket AHNA21K Standard packing: Carton: 10 pcs. Case: 100 pcs. Note: Certified by UL/C-UL RATING Item Specifications HN1 DIN rail HN1 PC board HN2 DIN rail HN2 PC board Type terminal socket terminal socket terminal socket terminal socket Contact arrangement 1 Form C 2 Form C Max. continuous current 10A 5A Between open contacts 1, 000 Vrms for 1 min. (Detection current: 10mA) Dielectric Between contact sets 3, 000Vrms for 1 min. (Detection current: 10mA) strength (Initial) 4,000Vrms for 1min. 5,000Vrms for 1min. 4,000Vrms for 1min. 5,000Vrms for 1min. Between contact and coil (Detection current: 10mA) (Detection current: 10mA) (Detection current: 10mA) (Detection current: 10mA) Insulation resistance (Initial) 1, 000 M between each terminal (500V DC) Condisitons for usage, Ambient temperature: -40 to 70C, Humidity: 5 to 85% R.H. Conditions transport and strage (Avoid icing when used at temperature lower than 0C) CAD (mm) The CAD data of the products with aCA mark can be downloaded from our Website. DIMENSIONS 1. HN1 PC board terminal socket (AHNA13) CAD External dimensions PC board pattern (Bottom view) 6.1 0 14.5 -1.0 4 7 0 34 -1.5 5-1.8 dia. 6 4.5 15 4 Tolerance: 0.1 0 36.5 -2.0 7.2 4 Dimension: Tolerance 1.2 4 1 Less than 1mm: 0.1 6 4.5 6.1 7 Min. 1mm less than 3mm: 0.2 15 4 Min. 3mm: 0.3 industrial.panasonic.com/ac/e/ Panasonic Corporation 2019 ASCTB419E 201903 2019.03 1 HN (AHN) RELAY ACCESSORIES 2. HN2 PC board terminal socket (AHNA23) External dimensions PC board pattern (Bottom view) CAD 5.6 0 14.5 -1.0 7.5 0 34 -1.5 5 5 8-1.3 dia. 20 Tolerance: 0.1 0 36.5 -2.0 8.4 4 Dimension: Tolerance 0.3 1 Less than 1mm: 0.1 5.6 7.5 5 5 Min. 1mm less than 3mm: 0.2 20 Min. 3mm: 0.3 3. HN1 DIN rail terminal socket (AHNA11K) CAD External dimensions Schematic (Top view) 4 2 1 1 71 3.55 5 3 Mounting hole dimensions 4.2 dia. hole M3 or 3.2 dia. Hole 6.1 35.5 15.7 3.7 0.1 29.7 *Reference in case of using DIN rail. (ATA48011) Tolerance: 0.5 * Reference in case of using DIN rail (ATA48011) Notes: 1. In order to prevent damage or deformation, the tightening torque for the terminal socket should be within 0.3 N m to 0.5N m. 2. When attaching the terminal socket directly to a chassis, please use M3 screw and hex nut. Panasonic Corporation Electromechanical Control Business Division Panasonic Corporation 2019 ASCTB419E 201903 industrial.panasonic.com/ac/e/ 2 *60.6 56.6 18.4 29.8
