Doc No. TA4-EA-05270 Revision. 3 Product Standards AN32155A Doc No. TA4-EA-05270 Revision. 3 Product Standards AN32155A ABSOLUTE MAXIMUM RATINGS Parameter Symbol Rating Unit Note VB 6.5 V *1 MAX Supply voltage CPOUT 6.5 V *1 MAX VDD 6.5 V *1 MAX Operating ambience temperature T 30 to + 85 C *2 opr Operating junction temperature T 30 to + 125 C *2 j Storage temperature T 55to+ 125 C *2 stg SLASEL, SCL, SDA, Input Voltage Range 0.3 to 6.5 V CLKIO, NRST CLKIO, VLDO, INT, Output Voltage Range Y1, Y2, Y3, Y4, 0.3 to 6.5 V X1, X2, X3 ESD HBM 2.0 kV Note) This product may sustain permanent damage if subjected to conditions higher than the above stated absolute maximum rating. This rating is the maximum rating and device operating at this range is not guaranteeable as it is higher than our stated recommended operating range. When subjected under the absolute maximum rating for a long time, the reliability of the product may be affected. *1: VB = VB, VDD = VDD , CPOUT = CPOUT MAX MAX MAX The values under the condition not exceeding the above absolute maximum ratings and the power dissipation. *2: Except for the power dissipation, operating ambient temperature, and storage temperature, all ratings are for T = 25C. a POWER DISSIPATION RATING PACKAGE P (Ta=25 C) P (Ta=85 C) JA D D 24 pin Wafer Level Chip Size Package (WLCSP) 197.29 C /W 0.507 W 0.2028 W Note) For the actual usage, please refer to the P -Ta characteristics diagram in the package specification, follow the power supply D voltage, load and ambient temperature conditions to ensure that there is enough margin and the thermal design does not exceed the allowable value. CAUTION Although this LSI has built-in ESD protection circuit, it may still sustain permanent damage if not handled properly. Therefore, proper ESD precautions are recommended to avoid electrostatic damage to the MOS gates Page 2 of 24 Established : 2010-08-06 Revised : 2013-04-01