VDE
High capacity up to 10 A
AQ1 RELAYS
PCB terminal type SSR
FEATURES
1. 10 A high-capacity realized for PC 5. Reduced noise generation
board terminal (when using heat sink) The load will operate at close to zero
SSR for compact PC boards with 10 A voltage even when the input signal is
capacity that is two times greater than applied during a cycle. Also, even if an
our previous model. It is suitable for long- input signal is cancelled during a cycle,
life, highly frequent control. the load is cut off at close to zero current.
2. VDE (EN60950-1) reinforced For this reason, hardly any noise is
insulation compliant produced and radio frequency
Fully satises demand for safety by interference (RFI) and electromagnetic
guaranteeing compliance with interference (EMI) are kept to a minimum.
EN60950-1 safety standard and featuring 6. Built-in snubber circuit prevents
3,000 V reinforced insulation (AQ3A2- malfunction.
ZT4/32VDC, AQ3A2-J-ZT4/32VDC and
AQ10A2-ZT4/32VDC).
TYPICAL APPLICATIONS
3. Superior anti-vibration and anti-
shock characteristics Printing machines
The body is molded as a single unit with Packing machines
ame resistant resin which makes it Automatic ticket punchers
highly resistant against vibration and Terminal equipment of data processing
shock, and gives it superior protection Computer peripherals
from environment. The body can also be NC machines
washed.
RoHS compliant
4. Vertical types with SIL terminal
arrangement and at types are
available.
1) The vertical type is available in
thicknesses of 10 mm (3 A types) and 12
mm (10 A type). Terminal arrangement is
SIL in integral multiples of 2.54 mm (0.1
inch).
2) The height of the at type is 12 mm.
The terminal arrangement is DIL in
integral multiples of 2.54 mm.
ORDERING INFORMATION
AQ
Load current
3 A, 10 A
Load voltage
2: 75 to 250 Vrms
Shape
Nil: Vertical type
J: Flat type
Type
ZT: Zero-cross AC output
T: Random AC output*
Control voltage
4/32 V DC: 4 to 32 V DC
* Random types are available by custom order.
ASCTB402E 201806-T
1AQ1
TYPES
1. AQ1 Solid State Relays
Load Isolation Zero-cross function Type Load current Load voltage Control voltage Part No.
Vertical 3 A 75 to 250 Vrms 4 to 32 V DC AQ3A2-ZT4/32VDC
1
AC Phototriac coupler Zero-cross* Flat 3 A 75 to 250 Vrms 4 to 32 V DC AQ3A2-J-ZT4/32VDC
2
Vertical 10 A* 75 to 250 Vrms 4 to 32 V DC AQ10A2-ZT4/32VDC
Standard packing: Carton 20 pcs., Case 200 pcs.
Notes: *1. Random type also available. Please contact our sales ofce.
*2. 5 A without heat sink
2. Heat sink for AQ1 solid state relay
Product name Part No.
Heat sink for AQ10A2-ZT4/32VDC AQ-HS-5A
Standard packing: Carton 20 pcs., Case 200 pcs.
SPECIFICATIONS
1. Rating (Ambient temperature: 20C 68F, Ripple factor: less than 1%)
Part No. AQ3A2-ZT4/32V DC
AQ10A2-ZT4/32V DC Remarks
Item AQ3A2-J-ZT4/32V DC
Control voltage 4 to 32 V DC
Input impedance
1
Input side *
Input current, max. 20 mA
Drop-out voltage, min. 1.0 V
2 5
Refer to REFERENCE DATA 1. Load
Max. load current* 3 A 10 A*
current vs. ambient temperature
Load voltage 75 to 250 Vrms
characteristics.
Frequency 45 to 65 Hz
3
Non-repetitive surge current* 100 A AC: In one cycle at 60 Hz
Load side
Max. OFF-state leakage
5 mA AC: at 200 V, 60 Hz
current
Max. ON-state voltage drop 1.6 V At Max. carrying current
4
Min. load current* 50 mA
Notes: *1. Refer to REFERENCE DATA 3. Input current vs. input voltage characteristics.
*2. Refer to REFERENCE DATA 1. Load current vs. ambient temperature.
*3. Refer to REFERENCE DATA 2. Non-repetitive surge current vs. carrying time.
*4. When load current is below the rating, refer to Cautions for Use of Solid State Relays.
*5. When heat sink (AQ-HS-5A) is installed. The max. load current is 5 A when heat sink is not installed.
2. Characteristics (Ambient temperature: 20C 68F, Ripple factor: less than 1%)
Part No. AQ3A2-ZT4/32V DC
AQ10A2-ZT4/32V DC Remarks
Item AQ3A2-J-ZT4/32V DC
Operate time, Max. 1/2 cycle of voltage sine wave +1 ms
Release time, Max. 1/2 cycle of voltage sine wave +1 ms
Insulation resistance, Min. 100 M for input, output and case at 500 V DC
4,000 Vrms between input and output
Breakdown voltage For 1 minute
2,500 Vrms between input, output and case
Destructive 10 to 55 Hz at double amplitude of 2 mm 1 hour for X, Y, Z axis
Vibration resistance
Functional 10 to 55 Hz at double amplitude of 2 mm 10 minutes for X, Y, Z axis
2
Destructive Min. 980 m/s {100 G} 5 times each for X, Y, Z axis
Shock resistance
2
Functional Min. 980 m/s {100 G} 4 times each for X, Y, Z axis
Ambient temperature 30 to +80C 22 to +176F Non-condensing at low temperatures
Storage temperature 30 to +100C 22 to +212F Non-condensing at low temperatures
Operational method Zero-cross (Turn-ON and Turn-OFF)
ASCTB402E 201806-T
2