TESTING AQV210HL GU (General Use) Type PhotoMOS 1-Channel (Form A) Current Limit Function RELAYS 6-Pin Type 4. Compact 6-pin DIP size FEATURES The device comes in a compact (W)6.4 1. Current Limit Function 6.4 0.05 (L)8.8 (H) 3.9mm (W).252 (L).346 8.8 0.05 .252 .002 To control an over current from owing, .346 .002 (H).154inch, 6-pin DIP size 3.6 0.2 .142 .008 the current limit function has been real- 5. Controls low-level analog signals ized. It keeps an output current at a con- 6.4 0.05 8.8 0.05 PhotoMOS relays feature extremely low .252 .002 stant value when the current reaches a .346 .002 3.9 0.2 closed-circuit offset voltage to enable .154 .008 specied current limit value. control of low-level analog signals without 2. Enhancing the capability of surge re- distortion. sistance between output terminals 6. High sensitivity, low ON resistance The current limit function controls the ON mm inch 7. Low-level off state leakage current time surge current to enhance the capa- bility of surge resistance between output terminals. 1 6 3. Reinforced insulation 5,000 V type 2 5 More than 0.4 mm internal insulation dis- 3 4 TYPICAL APPLICATIONS tance between inputs and outputs. Con- forms to EN41003, EN60950 (reinforced Telephone equipment insulation). Modem TYPES Part No. Output rating* Packing quantity Through hole Surface-mount terminal terminal I/O isolation Type voltage Tape and reel packing style Load Load Tube packing style Tube Tape and reel Picked from the Picked from the voltage current 1/2/3-pin side 4/5/6-pin side 1 tube contains AC/DC Reinforced 50 pcs. 350 V 130 mA AQV210HL AQV210HLA AQV210HLAX AQV210HLAZ 1,000 pcs. type 5,000 V 1 batch contains 500 pcs. *Indicate the peak AC and DC values. Note: For space reasons, the package type indicator X and Z are omitted from the seal. RATING 1. Absolute maximum ratings (Ambient temperature: 25 C 77 F) Item Symbol AQV210HL(A) Remarks LED forward current IF 50 mA LED reverse voltage VR 3 V Input Peak forward current IFP 1 A f = 100 Hz, Duty factor = 0.1% Power dissipation Pin 75 mW Load voltage (peak AC) VL 350 V Output Continuous load current IL 0.13 A Power dissipation Pout 500 mW Total power dissipation PT 550 mW I/O isolatiom voltage Viso 5,000 V AC Operating Topr 40 C to +85 C 40 F to +185 F Non-condensing at low temperatures Temperature limits Storage Tstg 40 C to +100 C 40 F to +212 F 107 AQV210HL 2. Electrical characteristics (Ambient temperature: 25 C 77 F) Item Symbol AQV210HL(A) Condition Typical 1.6 mA LED operate IFon IL = Max. current Maximum 3.0 mA Minimum 0.4 mA LED turn off Input IFoff IL = Max. current Typical 1.5 mA Minimum 1.14 (1.25 V at IF = 50mA) LED dropout VF IF = 5 mA voltage Typical 1.5 V IF = 5 mA Typical 20W On resistance Ron IL = Max. Maximum 25W Within 1 s on time Output Off state leakage IF = 0 Maximum ILeak 1m A current VL = Max. Current limit Typical 180 mA IF = 5 mA Typical 0.8 ms IF = 5 mA Turn on time* Ton IL = Max. Maximum 2.0 ms Typical 0.05 ms IF = 5 mA Turn off time* Toff IL = Max. Transfer Maximum 1.0 ms characteristics Typical 0.8 pF f = 1 MHz I/O capacitance Ciso VB = 0 Maximum 1.5 pF Initial I/O isolation Minimum Riso 1,000 MW 500 V DC resistance Note: Recommendable LED forward current IF= 5 to 10 mA. For type of connection, see Page 31. *Turn on/Turn off time Input 90% Output 10% Ton Toff REFERENCE DATA 1. Load current vs. ambient temperature char- 2. On resistance vs. ambient temperature char- 3. Turn on time vs. ambient temperature char- acteristics acteristics acteristics Allowable ambient temperature: 40 C to +85 C Measured portion: between terminals 4 and 6 LED current: 5 mA Load voltage: Max.(DC) 40 F to +185 F LED current: 5 mA Load voltage: Max. (DC) Continuous load current: Max.(DC) Continuous load current: Max.(DC) 200 50 2.5 40 2 W 150 30 1.5 100 20 1 50 10 0.5 0 0 0 40 20 020 40 60 80 85100 40 20 020 40 60 80 85 40 20 020 40 60 80 85 Ambient temperature, C Ambient temperature, C Ambient temperature, C 108 Load current, mA On resistance, Turn on time, ms