GU (General Use) Type PhotoMOS SOP Series 1-Channel (Form A) Type RELAYS control of low-level analog signals without (DIP) (SOP) distortion. 4.4 0.2 .173 .008 6.3 0.2 Approx. 25% 4. Low-level off state leakage current .248 .008 2.1 0.2 .083 .008 Volume In contrast to the SSR with an off state leakage current of several milliamps, the PhotoMOS relay features a very small off mm inch state leakage current of only 100 pA even Approx. 50% at the rated load voltage of 400 V Footprint (AQV214S). FEATURES 1. 1 channel (Form A) in super minia- 2. Tape and reel ture design TYPICAL APPLICATIONS The device comes standard in a tape and The device comes in a super-miniature reel (1,000 pcs./reel) to facilitate automat- SO package measuring (W) 4.4 (L) 6.3 Telephones ic insertion machines. (H) 2.1 mm (W) .173 (L) .248 (H) .083 Measuring instruments inch approx. 25% of the volume and 3. Controls low-level analog signals Computer 50% of the footprint size of DIP type Pho- PhotoMOS relays feature extremely low Industrial robots toMOS Relays. closed-circuit offset voltage to enable High-speed inspection machines TYPES Part No. Output ratings* Packing quantity in Type Picked from the 1/2/3-pin side Picked from the 4/5/6-pin side tape and reel Load voltage Load current 1 Form A 1 Form A 60 V 350 mA AQV212SX AQV212SZ 100 V 300 mA AQV215SX AQV215SZ 200 V 160 mA AQV217SX AQV217SZ AC/DC 1,000 pcs. 350 V 120 mA AQV210SX AQV210SZ 400 V 100 mA AQV214SX AQV214SZ 600 V 40 mA AQV216SX AQV216SZ *Indicate the peak AC and DC values. Notes: (1) Tape package is the standard packing style. Also available in tube. (Part No. sufx ro is not needed when ordering Tube: 75 pcs. Case: 1,500 pcs.) (2) For space reasons, the top two letters of the product numberA are ommitted on the product seal. The package type indicator and are also omitted from the seal. (Ex. the label for product number AQV214S is V214S). RATING 1. Absolute maximum ratings (Ambient temperature: 25 C 77 F) Type of Item Symbol AQV212S AQV215S AQV217S AQV210S AQV214S AQV216S Remarks connection LED forward current IF 50 mA LED reverse voltage VR 3 V Input f = 100 Hz, Peak forward current IFP 1 A Duty factor = 0.1% Power dissipation Pin 75 mW Load voltage (peak AC) VL 60 V 100 V 200 V 350 V 400 V 600 V A 0.35 A 0.30 A 0.16 A 0.12 A 0.10 A 0.04 A A connection: Peak Continuous load IL B 0.50 A 0.40 A 0.20 A 0.13 A 0.11 A 0.05 A AC, DC current B,C connection: DC Output C 0.70 A 0.56 A 0.28 A 0.15 A 0.12 A 0.06 A A connection: 100 ms Peak load current Ipeak 1.0A 0.90A 0.48A 0.3 A 0.3 A 0.12 A (1 shot) VL= DC Power dissipation Pout 450 mW Total power dissipation PT 500 mW I/O isolation voltage Viso 1,500 V AC Non-condensing at Operating Topr 40 C to +85 C 40 F to +185 F Temperature low temperatures limits Storage Tstg 40 C to +100 C 40 F to +212 F 461 AQV21m S 2. Electrical characteristics (Ambient temperature: 25 C 77 F) Type of Item Symbol connec- AQV212S AQV215S AQV217S AQV210S AQV214S AQV216S Remarks tion Typical 0.7 mA LED operate IFon IL= Max. current Maximum 3 mA Minimum 0.4 mA LED turn off Input IFoff IL= Max. current Typical 0.65 mA Typical 1.14 V (1.25 V at IF = 50 mA) LED dropout VF IF= 5 mA voltage Maximum 1.5 V IF= 5 mA Typical 0.83 W 2.3 W 11 W 23 W 30 W 70 W Ron A IL= Max. Maximum 2.5 W 4.0 W 15 W 35 W 50 W 120 W Within 1 s on time IF = 5 mA Typical 0.44 W 1.15 W 5.5 W 11.5 W 22.5 W 55 W On resistance Ron B IL = Max. Maximum 1.25 W 2.0 W 7.5 W 17.5 W 25 W 100 W Within 1 s on time Output IF = 5 mA Typical 0.25 W 0.6 W 2.8 W 6.0 W 11.3 W 28 W Ron C IL = Max. Maximum 0.63 W 1.0 W 3.8 W 8.8 W 12.5 W 50 W Within 1 s on time Off state IF = 0 Maximum ILeak1 m A leakage current VL = Max. Typical 0.65 ms 0.60 ms 0.25 ms 0.25 ms 0.25 ms 0.28 ms IF= 5 mA Turn on time* Ton VL = Max. Maximum 2.0 ms 2.0 ms 1.0 ms 0.5 ms 0.5 ms 0.5 ms Typical 0.08 ms 0.06 ms 0.05 ms 0.05 ms 0.05 ms 0.04 ms IF= 5 mA Turn off time Toff VL = Max. Transfer Maximum 0.2 ms characteristics Typical 0.8 pF f = 1 MHz I/O capacitance Ciso VB = 0 Maximum 1.5 pF Initial I/C isola- Minimum Riso 1,000 MW 500 V DC tion resistance Note: Recommendable LED forward current IF = 5mA. Type of connection. *Turn on/Turn off time Input 90% Output 10% Ton Toff n For Dimensions, see Page 441. n For Schematic and Wiring Diagrams, see Page 444. n For Cautions for Use, see Page 449. REFERENCE DATA 1. Load current vs. ambient temperature char- 2.-(1) On resistance vs. ambient temperature 2.-(2) On resistance vs. ambient temperature acteristics characteristics characteristics Allowable ambient temperature: 40 C to +85 C Measured portion: between terminals 4 and 6 Measured portion: between terminals 4 and 6 40 F to +185 F LED current: 5 mA Load voltage: Max. (DC) LED current: 5 mA Load voltage: Max. (DC) Type of connection: A Continuous load current: Max. (DC) Continuous load current: Max. (DC) 400 5 50 AQV212S 4 40 AQV215S AQV214S 300 AQV215S AQV210S 3 30 200 AQV217S 2 20 AQV210S AQV217S 100 AQV212S AQV214S 1 10 AQV216S 0 0 0 40 20 0 20 40 60 8085100 40 20 0 20 40 60 8085 40 20 0 20 40 60 8085 Ambient temperature, C Ambient temperature, C Ambient temperature, C 462 Load current, mA On resistance, On resistance,