PhotoMOS VSSOP 1 Form A CR RF CR type VSSOP package 60V and 100 V load voltage FEATURES Miniature VSSOP package Load voltage: 60 V and 100 V Low CR Low on resistance and low output capacitance available 2.9 60 V load voltage: AQY222R2T 1.8 2.1 Output capacitance: Typ. 27 pF, On resistance: Typ. 0.8 100 V load voltage: AQY225R3T Output capacitance: Typ. 5.8 pF, On resistance: Typ. 8.8 1 4 TYPICAL APPLICATIONS Measuring and testing equipment 2 3 IC tester, Probe card, Board tester and other testing equipment Telecommunication equipment Note: Please contact our sales representative for automotive applications of PhotoMOS. (Unit: mm) DETAILS FEATURES 2 4.6 mm mounting area achieved. Approx. 29% less than previous product (SON type). Contributes to the miniaturization of instruments and higher density mounting. 100 44 22 16 SOP 4pin SSOP SON VSSOP TYPES 1 Output rating* Part No. Packing quantity Category Tape and reel Tape and reel Load voltage Load current Tape and reel 2 2 packing style Y* packing style W* 60 V 400 mA AQY222R2TY AQY222R2TW 1-reel: 1,000 pcs. AC/DC dual use Outer carton: 1,000 pcs. 100 V 120 mA AQY225R3TY AQY225R3TW Note: For space reasons, only 2R2 or 5R3 is marked on the product as the part number. (Ex. the label for product number AQY222R2TY is 2R2.) *1. Indicate the peak AC and DC values. *2. Only tape and reel package is available.Tape and reel packing style Y: picked from the 1/4-pin side, tape and reel packing style W: picked from the 2/3-pin side. Panasonic Corporation 2019 industrial.panasonic.com/ac/e/ ASCTB342E 201912 2019.12 1 PhotoMOS RF VSSOP 1 Form A CR RATING Absolute maximum ratings (Ambient temperature: 25C) Item Symbol AQY222R2T AQY225R3T Remarks LED forward current IF 50 mA LED reverse voltage VR 5 V f = 100 Hz, Peak forward current IFP 1 A Duty Ratio = 0.1% Power dissipation Pin 75 mW Load voltage (peak AC) VL 60 V 100 V Continuous load current IL 0.4 A 0.12 A Peak AC, DC 100 ms (1 shot), Peak load current Ipeak 1.2 A 0.3 A VL = DC Power dissipation Pout 250 mW Total power dissipation PT 300 mW I/O isolation voltage Viso 200 Vrms (Avoid icing and Ambient temperature (Operating) Topr -40 to +85C condensation) Ambient temperature (Storage) Tstg -40 to +100C Electrical characteristics (Ambient temperature: 25C) Item Symbol AQY222R2T AQY225R3T Condition Typical 0.4 mA LED operate IFon current Maximum 3 mA AQY222R2T: IL = 400 mA AQY225R3T: IL = 80 mA Minimum 0.1 mA LED turn off IFoff current Typical 0.35 mA Typical 1.14 V (1.35 V at IF = 50 mA) LED dropout VF IF = 5 mA voltage Maximum 1.5 V AQY222R2T: Typical 0.8 8.8 IF = 5 mA, IL = 400 mA On resistance Ron AQY225R3T: IF = 5 mA, IL = 80 mA Maximum 1.25 14 Within 1 s IF = 0 mA Typical 27 pF 5.8 pF Output Cout VB = 0 V capacitance Maximum 40 pF 8 pF f = 1 MHz Typical 0.01 nA Off state leakage IF = 0 mA ILeak 1 current VL = Max. Maximum 10 nA* Typical 0.12 ms 0.04 ms 2 AQY222R2T: Turn on time* Ton Maximum 0.5 ms IF = 5 mA, VL = 10 V, RL = 100 AQY225R3T: Typical 0.08 ms 0.05 ms 2 Turn off time* Toff IF = 5 mA, VL = 10 V, RL = 125 Maximum 0.2 ms Typical 0.4 pF f = 1 MHz I/O capacitance C iso VB = 0 V Maximum 1.5 pF Note: Variation possible through combinations of output capacitance and on resistance. For more information, please contact our sales representative. *1.Available as custom orders (1 nA or less), except AQY222R2T *2. Turn on/Turn off time Input 90% 10% Output Ton To Recommended operating conditions (Ambient temperature: 25C) Please use under recommended operating conditions to obtain expected characteristics. Item Symbol Min. Max. Unit LED current IF 5 30 mA Load voltage (Peak AC) VL - 30 V AQY222R2T Continuous load current IL - 0.4 A Load voltage (Peak AC) VL - 50 V AQY225R3T Continuous load current IL - 0.12 A Panasonic Corporation Electromechanical Control Business Division Panasonic Corporation 2019 ASCTB342E 201912 2 industrial.panasonic.com/ac/e/ Transfer Output Input Output side Input side characteristics