Long Stroke and Sliding Turquoise Stroke Contact Construction Sealed Switches Switches FEATURES TYPICAL APPLICATIONS For pin plunger type, it maintains a Automobiles (detection of door 5.4 13.3 long stroke OT (Over Travel) with opening and closing and shift lever over 2.2 mm on the NO side and over position, etc.) 10.1 2.5 mm on the NC side. Household appliances (vacuum Since contact force does not depend cleaners, air conditioners, washing on the operation stroke, the range of machines, etc.) (Unit: mm) possible use over the entire stroke is greatly increased. High contact reliability to support RoHS compliant low level switching loads Highly effective sealing for resistance against adverse environments Silent operation with sliding contact ORDERING INFORMATION ASQ1 Size of mounting hole Terminal Contact form Actuator 0: Mounting hole 3 mm 2: Wire leads right side type 3: Wire leads left side type 1: SPDT 2: SPST-NC 3: SPST-NO 0: Pin plunger standard type (SPST-NC and (SPST-NC and (wire lead type only) (wire lead type only) 7: Leaf lever 1: Mounting hole 3 mm SPST-NO only) SPST-NO only) 8: Simulated without boss type leaf lever 4: Right side pin type COM NO NC COM NC COM NO (solder terminal only) 5: Left side pin type 4: Solder 5: PC board 6: Wire leads (solder terminal only) terminal terminal bottom type 6: Right 2 boss type (solder terminal only) 7: Left 2 boss type (solder terminal only) 7: PC board right angle 8: PC board left angle terminal terminal Note: Not every combination is available. Please refer to the following table, PRODUCT TYPES. PRODUCT TYPES Terminal type (Mounting hole 3mm standard type/Mounting hole 3mm without boss type/2 boss type/Side pin type) Mounting hole Right 2 boss Left 2 boss Right side pin Left side pin Mounting hole 3mm standard type 3mm without type type type type Operating boss type Actuator Force OF PC PC (Max.) Solder PC board Solder Solder Solder Solder right angle left angle terminal terminal terminal terminal terminal terminal terminal terminal Pin plunger 1.5N ASQ10410 ASQ10710 ASQ10810 ASQ11510 ASQ16410 ASQ17410 ASQ14410 ASQ15410 Leaf lever 1.7N ASQ10417 ASQ10717 ASQ10817 ASQ11517 ASQ16417 ASQ17417 ASQ14417 ASQ15417 Simulated leaf lever 1.5N ASQ10418 ASQ10718 ASQ10818 ASQ11518 ASQ16418 ASQ17418 ASQ14418 ASQ15418 AECTB6E 201701-T 1Turquoise Stroke Switches (ASQ1) Wire leads bottom type (Mounting hole 3mm standard type) Wire leads bottom type (Mounting hole 3mm standard type) Actuator Operating Force OF (Max.) SPDT SPST-NC SPST-NO Pin plunger 1.5N ASQ10610 ASQ10620 ASQ10630 Leaf lever 1.7N ASQ10617 ASQ10627 ASQ10637 Simulated leaf lever 1.5N ASQ10618 ASQ10628 ASQ10638 Wire leads side type (Mounting hole 3mm standard type) Wire leads right side type Wire leads left side type (Mounting hole 3mm standard type) (Mounting hole 3mm standard type) Actuator Operating Force OF (Max.) SPST-NC SPST-NO SPST-NC SPST-NO Pin plunger 1.5N ASQ10220 ASQ10230 ASQ10320 ASQ10330 Leaf lever 1.7N ASQ10227 ASQ10237 ASQ10327 ASQ10337 Simulated leaf lever 1.5N ASQ10228 ASQ10238 ASQ10328 ASQ10338 SPECIFICATIONS Contact rating 1 mA 5 V DC to 100 mA 30 V DC Note: Please consult us regarding 42 V DC rating. Operation environment and conditions Item Specications Ambient and storage temperature 40C to +85C (no freezing and condensing) Allowable operating speed 30 to 500 mm/sec. Max. operating cycle rate 120 cpm Note: When switching at low and high speeds or under vibration, or in high-temperature, high-humidity environments, life and performance may be reduced signicantly depending on the load capacity. Please consult us. Electrical characteristics Between non-continuous terminals: 600 Vrms, Between each terminal and other exposed metal parts: 1,500 Vrms, Dielectric strength (Initial) Between each terminal and ground: 1,500 Vrms (at detection current of 1 mA) Insulation resistance (Initial) Min. 100 M (at 500 V DC insulation resistance meter) (Locations measured same as dielectric strength.) Contact resistance (Initial) Max. 1 (by voltage drop 0.1 A 6 to 8 V DC) Characteristics Item Specications 5 Note 1) Switching frequency: 20 times/min. 5 V DC 1 mA (Resistive load) Min. 5 10 Electrical Conduction ratio: 1:1 5 Note 2) switching 16 V DC 50 mA (Resistive load) Min. 5 10 Pushbutton operation speed: 100 mm/s life 5 Note 2) 30 V DC 100 mA (Resistive load) Min. 2 10 Pushbutton switching position: free position (FP) to operation limit position (TTP) Single amplitude: 0.75 mm Amplitude of vibration: 10 to 55 Hz (4 minutes cycle) Direction and time: 30 minutes each in X, Y and Z directions Vibration resistance (malfunction vibration resistance) Amplitude of vibration: 5 to 200 Hz (10 minutes cycle) 2 Acceleration: 43.1 m/s Direction and time: 30 minutes each in X, Y and Z directions 2 Shock resistance Shock value: 980 m/s (malfunction shock resistance) Direction and time: 5 times each in X, Y and Z directions 2 Frequency of vibration: 33.3 Hz, Acceleration: 43.1 m/s Vibration resistance endurance Direction and time: 8 hours each in X, Y and Z directions Terminal strength 6 N min. (each direction) *Terminal deformation possible. Heat resistance 85C 500 hours Cold resistance 40C 500 hours Humidity resistance 40C 95% RH 500 hours Thermal shock resistance 30 min. at 85C to 30 min at 40C for 1,000 cycles Unit weight Approx. 0.8 g (terminal type), Approx. 5.4 g (wire leads side type) Protection grade IP67 (except exposed terminal part of terminal type) Note: As long as there are no particular designations, the following conditions apply to the test environment. Ambient temperature: 5 to 35C Relative humidity: 25 to 85% RH Air pressure: 86 to 106 kPa Note 1: Switching life for single switching (COM-NC or COM-NO connection) and double switching (COM-NC and COM-NO connection). Note 2: Switching life is for single switching life. For double switching it is greater than 100,000 times. AECTB6E 201701-T 2