For FPC FPC connectors (0.3mm pitch) Y3BL Back lock FEATURES 1. Low prole (height: 0.6 mm) and 3. High durability assured with slim design (width: 3.35 mm, including proprietary soldering terminal the lever) construction 2. Compatible with FPC 0.2 mm Housing damage is prevented when FPC thickness is inserted incorrectly thanks to the two The connector has a 0.6 mm low-prole walls on the FPC inlet side being metal however, it is compatible with FPCs that (soldering terminal). are 0.2 mm thick, facilitating assembly work. Metal wall (soldering terminal) 0.60 RoHS compliant 4. Assembly time is reduced when connector levers are received open. 5. Wiring patterns can be placed underneath the connector. 6. Ni barrier with high resistance to solder creepage Unit: mm APPLICATIONS Compact mobile devices such as wearable devices, smartphones, tablet PCs, DSCs, and DVCs. ORDERING INFORMATION AYF 3 5 2 5 35: FPC Connector Y3BL (0.3 mm pitch) Back lock Number of pins (2 digits) Contact direction 2: Top contact Surface treatment (Contact portion / Terminal portion) 5: Au plating/Au plating (Ni barrier) ACCTB52E 201602-T 1 2.95 3.35 (including the lever)FPC connectors Y3BL (0.3mm pitch) PRODUCT TYPES Packing Height Number of pins Part number Inner carton (1-reel) Outer carton 7 AYF350725 11 AYF351125 15 AYF351525 23 AYF352325 25 AYF352525 0.6 mm 5,000 pieces 10,000 pieces 27 AYF352725 31 AYF353125 39 AYF353925 45 AYF354525 51 AYF355125 Notes: 1. Order unit For volume production: 1-inner carton (1-reel) units For samples, please contact our sales ofce. 2. Please contact our sales ofce for connectors having a number of pins other than those listed above. SPECIFICATIONS 1. Characteristics The followings show specications, when using an applicable FPC (thickness 0.20 mm) Item Specications Conditions Rated current 0.2A/pin contact Rated voltage 50V AC/DC Insulation resistance Min. 1,000M (initial) Using 250V DC megger (applied for 1 min.) Electrical No short-circuiting or damage at a detection current of 1 mA characteristics Dielectric strength 150V AC for 1 min. when the specied voltage is applied for one minute. Based on the contact resistance measurement method Contact resistance Max. 160m specied by JIS C 5402. Measurement of the maximum force applied until the Mechanical FPC holding force Min. 0.10N/pin contact pin contacts (initial) inserted compatible FPC is pulled out in the insertion axis characteristics direction while the connector lever is closed Ambient temperature 55C to +85C No icing or condensation. 55C to +85C (product only) Storage temperature 40C to +50C (emboss packing) Conformed to MIL-STD-202F, method 107G Order Temperature (C) Time (minutes) 0 1 55 30 5 cycles, 3 Thermal shock resistance insulation resistance min. 100M, 2 Max. 5 (with FPC mated) +3 contact resistance max. 160m 3 85 30 0 4 Max. 5 0 55 3 Environmental characteristics 120 hours, Conformed to IEC60068-2-78 Humidity resistance insulation resistance min. 100M, Bath temperature 40C2C, (with FPC mated) contact resistance max. 160m humidity 90% to 95% R.H. 24 hours, Conformed to IEC60068-2-11 Saltwater spray resistance insulation resistance min. 100M, Bath temperature 35C2C, (with FPC mated) contact resistance max. 160m saltwater concentration 5%1% Bath temperature 40C2C, H2S resistance 48 hours, gas concentration 3 ppm 1 ppm, (with FPC mated) contact resistance max. 160m humidity 75% to 80% R.H. Peak temperature: 260C or less Reow soldering Soldering heat resistance 300C within 5 sec. 350C within 3 sec. Soldering iron Lifetime Insertion and removal life 20 times Repeated insertion and removal: min. 10 sec./time characteristics Unit weight 51 pin contacts: 0.05 g 2. Material and surface treatment Part name Material Surface treatment Housing: LCP resin (UL94V-0) Molded portion Lever: LCP resin (UL94V-0) Contact portion Base: Ni plating, Surface: Au plating Contact Copper alloy Terminal portion Base: Ni plating, Surface: Au plating Soldering terminal Copper alloy Ni on base, Pd + Au ash plating ACCTB52E 201602-T 2