AYF52 FPC CONNECTORS FPC CONNECTORS FOR FPC/FFC Y5F (0.5 mm pitch) CONNECTION (Former Name: YF52) FEATURES APPLICATIONS 1. A wide variety of digital equipments Digital equipment, such as PCs, digital The 0.5mm pitch, 2.0mm height, and TVs, HDDs, car navigation systems, 6.3mm depth are suitable for a variety of home-use game machines, digital equipment. multifunction fax machines, and security cameras 6.3 mm 2. Front lock structure with tactile feedback The front lock structure facilitates FPC connection work. 3. Equipped with soldering terminals Compliance with RoHS Directive for higher mounting strength ORDERING INFORMATION AYF 5 2 1 5 52: FPC Connector 0.5 mm pitch (Front lock) Number of contacts (2 digits) Contact direction 1: Bottom contact Surface treatment (Contact portion / Terminal portion) 5: Au plating/Au flash plating PRODUCT TYPES Packing Height Number of contacts Part number Inner carton Outer carton 26 AYF522615 28 AYF522815 34 AYF523415 2.0 mm 40 AYF524015 2,000 pieces 4,000 pieces 45 AYF524515 50 AYF525015 54 AYF525415 Note: Order unit For mass production: in 1-inner carton (1-reel) units Samples for mounting check: in 50-connector units. Samples: Small lot orders are possible. Please contact our sales ofce. panasonic-electric-works.net/ac (110) 2.0 mmAYF52 SPECIFICATIONS 1. Characteristics Item Specications Conditions Rated current 0.5A/contact Rated voltage 50V AC/DC Insulation resistance Min. 1,000M (initial) Using 250V DC megger Electrical No short-circuiting or damage at a detection current of 1 mA characteristics Breakdown voltage 250V AC for 1 min. when the specied voltage is applied for one minute. Measurement using HP4338B based on the measurement Contact resistance Max. 45m method specied by JIS C 5402. Measurement of the maximum force applied until the FPC/FFC holding force Min. 0.2N/contacts contacts (initial) inserted compatible FPC is pulled out in the insertion axis direction while the connector lever is closed Mechanical Measuring the maximum force. characteristics Contact holding force Min. 1.0N/contacts As the contact is axially pull out. Soldering terminal holding Measuring the maximum force. Min. 1.0N/contacts force As the soldering terminal is axially pull out. Ambient temperature 55C to +85C No freezing at low temperatures. No dew condensation. 55C to +85C (product only) Storage temperature 40C to +50C (emboss packing) Sequence 1. 40C, 30 minutes Thermal shock resistance 5 cycles, 2. Normal temperature (+20 to 35C), 5 to 15 minutes (with FPC/FFC inserted) contact resistance max. 45m 3. +85C, 30 minutes 4. Normal temperature (+20 to 35C), 5 to 15 minutes Environmental 120 hours, Humidity resistance Bath temperature 402C, characteristics insulation resistance min. 500M , (with FPC/FFC inserted) humidity 90 to 95% R.H. contact resistance max. 45m Saltwater spray resistance 24 hours, Bath temperature 352C, (with FPC/FFC inserted) contact resistance max. 45m saltwater concentration 51% H2S resistance 48 hours, Bath temperature 402C, gas concentration 31 ppm, (with FPC/FFC inserted) contact resistance max. 45m humidity 75% R.H. Peak temperature: 260C or less Reow soldering Soldering heat resistance 300C within 5 sec. 350C within 3 sec. Soldering iron Lifetime Insertion and removal life 30 times Repeated insertion and removal: min. 10 sec./time characteristics Unit weight 50-contact type: 0.51 g 2. Material and surface treatment Part name Material Surface treatment Housing: LCP resin Molded portion Lever: Polyamide resin Contact portion Base: Ni plating, Surface: Au plating Contact Copper alloy Terminal portion Base: Ni plating, Surface: Au plating Soldering terminal portion Copper alloy Base: Ni plating, Surface: Sn plating DIMENSIONS (Unit: mm) A0.10 0.500.10 (0.20) When the lever is rotated (reference) B0.20 5.500.30 C0.30 4.60 (3.25) (FPC insertion depth) Number of contacts/ A B C dimension 26 12.5 16.3 17.1 28 13.5 17.3 18.1 34 16.5 20.3 21.1 40 19.5 23.3 24.1 45 22.0 25.8 26.6 50 24.5 28.3 29.1 54 26.5 30.3 31.1 panasonic-electric-works.net/ac (110) 1.20 2.00 0.80 2.00 (4.23)