Automation Controls Catalog For FPC/FFC* FPC connectors Y5B/Y5BW (0.5mm pitch) Series Back lock FEATURES 1. Low prole, space saving back lock The FPC holding contacts located on type with improved lever operability both ends of the connector facilitate 2. Mechanical design freedom positioning of FPC and further enhance achieved by top and bottom double the FPC holding force. contacts Structure to lock 3. Wide selection, including a type notches on both ends of the FPC with with a small number of pins holding contacts Y5B/Y5BW Low prole and space saving design of 1.0 mm high and 3.20 mm deep (3.70 mm with lever) RoHS compliant Y5B and Y5BW can have a minimum of four and two contacts respectively, Applicable FPC shape maximum reduction in design packaging. With notches 1.00 (1) The inserted FPC can be temporarily held until the lever is Unit: mm closed. (2) When the lever is closed, the holding contacts lock the FPC by its notches, enhancing the FPC holding force. 4 pin contacts (Y5B: minimum) * (Y5BW is compatible with FPC only.) 4. Wiring patterns can be placed APPLICATIONS underneath the connector. 5. Man-hours for assembly can be A wide range of digital equipment, reduced by delivering the connectors including mobile phones, with their levers opened. smartphones, PCs, digital still camera, 6. Y5BW features lock holding type, and digital video camera. Ideal for including a structure to temporarily touch panels and LCD backlights, hold the FPC and a higher holding which require connectors with a small force. number of pins. ORDERING INFORMATION Y5B AYF 5 3 3 5 53: FPC Connector 0.5 mm pitch (Back lock) Number of pins (2 digits) Function 3: Top and bottom double contacts Surface treatment (Contact portion / Terminal portion) 5: Au plating/Au plating (Ni barrier) Y5BW AYF 5 3 6 5 T 53: FPC Connector 0.5 mm pitch (Back lock) Number of pins (2 digits) Function 6: Top and bottom double contacts, lock holding type Surface treatment (Contact portion / Terminal portion) 5: Au plating/Au plating (Ni barrier) T: Suction area expansion type industrial.panasonic.com/ac/e/ Panasonic Corporation 2013 ACCTB1E 201310-T 2013.10 1 3.20FPC connectors Y5B/Y5BW (0.5mm pitch) Back lock PRODUCT TYPES Y5B Y5BW Packing Height Number of pins Part number Number of pins Part number Inner carton (1-reel) Outer carton 4AYF530435 2 AYF530265T 5 AYF530535 3 AYF530365T 6AYF530635 4 AYF530465T 8 AYF530835 6 AYF530665T 10 AYF531035 8 AYF530865T 12 AYF531235 10 AYF531065T 14 AYF531435 12 AYF531265T 16 AYF531635 14 AYF531465T 1.0 mm 5,000 pieces 10,000 pieces 24 AYF532435 22 AYF532265T 28 AYF532835 26 AYF532665T 30 AYF533035 28 AYF532865T 32 AYF533235 30 AYF533065T 34 AYF533435 32 AYF533265T 40 AYF534035 38 AYF533865T 42 AYF534235 40 AYF534065T 50 AYF535035 48 AYF534865T Notes: 1. Order unit For volume production: 1-inner carton (1-reel) units Samples for mounting check: 50-connector units. Please contact our sales ofce. Samples: Small lot orders are possible. Please contact our sales ofce. 2. Please contact our sales ofce for connectors having a number of pins other than those listed above. SPECIFICATIONS 1. Characteristics: When using an applicable FPC (thickness 0.30 mm) Item Specications Conditions Rated current 0.5A/pin contact (Except for holding contact) Rated voltage 50V AC/DC Insulation resistance Min. 1,000M (initial) Using 250V DC megger (applied for 1 min.) Electrical No short-circuiting or damage at a detection current of 1 mA characteristics Breakdown voltage 250V AC for 1 min. when the specied voltage is applied for one minute. Based on the contact resistance measurement method Contact resistance Max. 100m specied by JIS C 5402. Y5B: Min. 0.2N/pin contact pin contacts (initial) Measurement of the maximum force applied until the Mechanical FPC holding force Y5BW: Min. 0.2N/pin contact pin contacts + 2.0N inserted compatible FPC is pulled out in the insertion axis characteristics (initial) direction while the connector lever is closed Ambient temperature 55C to +85C No freezing at low temperatures. No dew condensation. 55C to +85C (product only) Storage temperature 40C to +50C (emboss packing) Conformed to MIL-STD-202F, method 107G Order Temperature (C) Time (minutes) 0 1 55 30 5 cycles, 3 Thermal shock resistance insulation resistance min. 100M, 2 Max. 5 (with FPC mated) +3 contact resistance max. 100m 3 85 30 0 4 Max. 5 0 Environmental 55 3 characteristics 120 hours, Humidity resistance Bath temperature 402C, insulation resistance min. 100M, (with FPC mated) humidity 90 to 95% R.H. contact resistance max. 100m 24 hours, Saltwater spray resistance Bath temperature 352C, insulation resistance min. 100M, (with FPC mated) saltwater concentration 51% contact resistance max. 100m H2S resistance 48 hours, Bath temperature 402C, gas concentration 31 ppm, (with FPC mated) contact resistance max. 100m humidity 75 to 80% R.H. Peak temperature: 260C or less Reow soldering Soldering heat resistance 300C within 5 sec. 350C within 3 sec. Soldering iron Lifetime Insertion and removal life 20 times Repeated insertion and removal: min. 10 sec./time characteristics Unit weight Y5B (50 pin contacts): 0.16 g 2. Material and surface treatment Part name Material Surface treatment Housing: LCP resin (UL94V-0) Molded portion Lever: LCP resin (UL94V-0) Contact portion Base: Ni plating, Surface: Au plating Contact Copper alloy Terminal portion Base: Ni plating, Surface: Au plating Holding contact (Only Y5BW) Copper alloy Terminal portion Base: Ni plating, Surface: Au plating Soldering terminals Copper alloy Base: Ni plating, Surface: Au plating Panasonic Corporation Automation Controls Buisiness Division Panasonic Corporation 2013 ACCTB1E 201310-T industrial.panasonic.com/ac/e/ 2