ECA-1CEN470 Panasonic

Aluminum Electrolytic Capacitors This Series is no longer available for purchase in the country of Japan. Radial Lead Type GA-A (Bi-polar) series Features Endurance : 105 1000 h to 2000 h RoHS compliant Specifications Category temp. range 40 to +105 Rated voltage range 6.3 V to 50 V Capacitance range 2.2 F to 330 F Capacitance tolerance 20 % (120 Hz / +20) I 0.03 CV + 3 (A) After 2 minutes Leakage current or I 0.03 CV or 3 (A) After 5 minutes (Whichever is greater) Dissipation factortan ) Please see the attached characteristics list After following life test of DC working voltage at +105 2 when the capacitors are restored to 20 , the capacitors shall meet the following limits. Duration 5 to 8 : 1000 h (500 h for each polarity) Endurance 10 : 2000 h (1000 h for each polarity) Capacitance change Within 20 % of the initial value Dissipation factortan ) 200 % of the initial limit DC leakage current Within the initial limit After storage for 1000 h at +105 2 with no voltage applied and then being Shelf life stabilized at +20 , capacitors shall meet the limits specified in endurance. (With voltage treatment) Frequency correction factor for ripple current Freq.(Hz) 50, 60 120 1 k 10 k to Capacitance (F) 2.2 to 330 0.70 1.00 1.30 1.70 Dimensions Sleeve 8 10 Pressure relief 6.3 14min. 3min. L* D0.5 D0.5 * L 16L1.0 L 20L2.0 Unitmm D 5.0 6.3 8.0 10.0 d 0.5 0.5 0.6 0.6 F 2.0 2.5 3.5 5.0 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 28-Feb-20 d0.05 F0.5Aluminum Electrolytic Capacitors (Radial Lead Type) GA-A (Bi-polar) series Characteristics list Endurance : 105 1000 h / 5 to 8 (500 h for each polarity), 105 2000 h / 10 (1000 h for each polarity) Case size Lead length Min. Packaging Specification Q ty (PCS) () (mm) Rated Capacitance voltage Lead space Part No. (20 %) Ripple Lead Strai- (V) (F) *2 *1 D L dia. Taping Taping ght Taping current tan Straight (d) B i leads (mA rms) 100 6.3 11.2 130 0.30 0.5 2.5 5.0 2.5 ECA0JEN101( ) 200 2000 6.3 330 8.0 11.5 250 0.30 0.6 3.5 5.0 ECA0JEN331( ) 200 1000 10 47 5.0 11.0 90 0.24 0.5 2.0 5.0 2.5 200 2000 ECA1AEN470( ) 10 5.0 11.0 40 0.20 0.5 2.0 5.0 2.5 ECA1CEN100( ) 200 2000 22 5.0 11.0 60 0.20 0.5 2.0 5.0 2.5 ECA1CEN220( ) 200 2000 16 33 5.0 11.0 80 0.20 0.5 2.0 5.0 2.5 ECA1CEN330( ) 200 2000 47 6.3 11.2 100 0.20 0.5 2.5 5.0 2.5 ECA1CEN470( ) 200 2000 10 5.0 11.0 45 0.15 0.5 2.0 5.0 2.5 200 2000 ECA1EEN100( ) 22 6.3 11.2 60 0.15 0.5 2.5 5.0 2.5 ECA1EEN220( ) 200 2000 25 33 6.3 11.2 90 0.15 0.5 2.5 5.0 2.5 ECA1EEN330( ) 200 2000 47 6.3 11.2 110 0.15 0.5 2.5 5.0 2.5 ECA1EEN470( ) 200 2000 100 8.0 11.5 180 0.15 0.6 3.5 5.0 ECA1EEN101( ) 200 1000 33 8.0 11.5 100 0.15 0.6 3.5 5.0 200 1000 ECA1VEN330( ) 35 100 10.0 16.0 230 0.15 0.6 5.0 5.0 ECA1VEN101( ) 200 500 2.2 5.0 11.0 18 0.15 0.5 2.0 5.0 2.5 ECA1HEN2R2( ) 200 2000 3.3 5.0 11.0 25 0.15 0.5 2.0 5.0 2.5 ECA1HEN3R3( ) 200 2000 4.7 5.0 11.0 30 0.15 0.5 2.0 5.0 2.5 ECA1HEN4R7( ) 200 2000 10 6.3 11.2 50 0.15 0.5 2.5 5.0 2.5 200 2000 ECA1HEN100( ) 50 22 8.0 11.5 90 0.15 0.6 3.5 5.0 ECA1HEN220( ) 200 1000 33 8.0 11.5 110 0.15 0.6 3.5 5.0 ECA1HEN330( ) 200 1000 47 10.0 12.5 140 0.15 0.6 5.0 5.0 ECA1HEN470( ) 200 500 100 10.0 20.0 250 0.15 0.6 5.0 5.0 ECA1HEN101( ) 200 500 *1: Ripple current (120 Hz / +105 ) *2: tan (120 Hz/ +20 ) When requesting taped product, please put the letter B or i between the( . Lead wire pitchB=5 mm, i=2.5mm. Please refer to the page of Taping dimensions. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 28-Feb-20