Aluminum Electrolytic Capacitors (Radial Lead Type) Radial Lead Type Series : M Type : A Features Endurance : 85 C 2000 h Smaller than series SU RoHS compliant Specifi cations Category temperature range 40 C to + 85 C 25 C to +85 C Rated voltage range 6.3 V.DC to 100 V.DC 160 V.DC to 450 V.DC Capacitance range 2.2 F to 22000 F 1 F to 470 F Capacitance tolerance 20 % (120 Hz/+20 C) I < 0.01 CV or 3 (A) After 2 minutes Leakage current I < 0.06 CV +10 (A) After 2 minutes (Whichever is greater) Dissipation factor (tan d) Please see the attached characteristics list After applying rated working voltage for 2000 hours at +85C2 C, when the capacitors are restored to 20 C, capacitors shall meet the following limits. Endurance Capacitance change Within 20 % of the initial value tan d < 150 % of the initial limit DC leakage current Within the initial limit After storage for 1000 hours at +85 C2 C with no voltage applied and then being stabilized Shelf life at +20 C, capacitors shall meet the limits speci ed in Endurance. (With voltage treatment) Frequency correction factor for ripple current Frequency (Hz) 50, 60 120 1 k 10 k to Correction factor 0.70 1.00 1.30 1.70 Dimensions Sleeve < 08 010< Pressure relief + 06.3 < L 14 min. 3 min. 0D+0.5 0D+0.5 L < 16 : L1.0 L > 20 : L2.0 (Unit : mm) 0D 5 6.3 8 10 12.5 16 18 d 0.5 0.5 0.6 0.6 0.6 0.8 0.8 0 F 2.0 2.5 3.5 5.0 5.0 7.5 7.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016 fd0.05 F0.5Aluminum Electrolytic Capacitors (Radial Lead Type) Characteristics list Endurance : 85 C 2000 h Case size (mm) Speci cation Lead length (mm) Min. Packaging Q ty Ripple Lead space Rated Cap. current tan d Lead Straight voltage (20 %) Part No. Taping 0DL (120 Hz) (120 Hz) dia. leads Taping Taping (V.DC) (F) (pcs) Straight (+85 C) (+20 C) 0d (pcs) B i (mA r.m.s.) 220 5 11 240 0.28 0.5 2.0 5.0 2.5 ECA0JM221( ) 200 2000 470 6.3 11.2 380 0.28 0.5 2.5 5.0 2.5 ECA0JM471( ) 200 2000 1000 8 11.5 580 0.28 0.6 3.5 5.0 ECA0JM102( ) 200 1000 2200 10 16 890 0.30 0.6 5.0 5.0 ECA0JM222( ) 200 500 3300 10 20 1020 0.32 0.6 5.0 5.0 ECA0JM332( ) 200 500 6.3 4700 12.5 20 1170 0.34 0.6 5.0 5.0 ECA0JM472( ) 200 500 6800 12.5 25 1270 0.38 0.6 5.0 5.0 ECA0JM682( ) 200 500 10000 16 25 1450 0.46 0.8 7.5 7.5 ECA0JM103( ) 100 250 15000 16 31.5 1700 0.56 0.8 7.5 ECA0JM153 100 22000 18 35.5 1900 0.70 0.8 7.5 ECA0JM223 50 330 6.3 11.2 330 0.24 0.5 2.5 5.0 2.5 ECA1AM331( ) 200 2000 1000 10 12.5 630 0.24 0.6 5.0 5.0 ECA1AM102( ) 200 500 2200 10 20 920 0.26 0.6 5.0 5.0 ECA1AM222( ) 200 500 3300 12.5 20 1090 0.28 0.6 5.0 5.0 ECA1AM332( ) 200 500 10 4700 12.5 25 1200 0.30 0.6 5.0 5.0 ECA1AM472( ) 200 500 6800 16 25 1400 0.34 0.8 7.5 7.5 ECA1AM682( ) 100 250 10000 16 31.5 1600 0.42 0.8 7.5 ECA1AM103 100 15000 18 35.5 1850 0.52 0.8 7.5 ECA1AM153 50 10 5 11 30 0.20 0.5 2.0 5.0 2.5 ECA1CM100( ) 200 2000 22 5 11 75 0.20 0.5 2.0 5.0 2.5 ECA1CM220( ) 200 2000 33 5 11 110 0.20 0.5 2.0 5.0 2.5 ECA1CM330( ) 200 2000 47 5 11 130 0.20 0.5 2.0 5.0 2.5 ECA1CM470( ) 200 2000 100 5 11 180 0.20 0.5 2.0 5.0 2.5 ECA1CM101( ) 200 2000 220 6.3 11.2 280 0.20 0.5 2.5 5.0 2.5 ECA1CM221( ) 200 2000 16 470 8 11.5 440 0.20 0.6 3.5 5.0 ECA1CM471( ) 200 1000 1000 10 16 680 0.20 0.6 5.0 5.0 ECA1CM102( ) 200 500 2200 12.5 20 1000 0.22 0.6 5.0 5.0 ECA1CM222( ) 200 500 3300 12.5 25 1200 0.24 0.6 5.0 5.0 ECA1CM332( ) 200 500 4700 16 25 1360 0.26 0.8 7.5 7.5 ECA1CM472( ) 100 250 6800 16 31.5 1600 0.30 0.8 7.5 ECA1CM682 100 10000 18 35.5 1800 0.38 0.8 7.5 ECA1CM103 50 100 6.3 11.2 180 0.16 0.5 2.5 5.0 2.5 ECA1EM101( ) 200 2000 330 8 11.5 390 0.16 0.6 3.5 5.0 ECA1EM331( ) 200 1000 470 10 12.5 480 0.16 0.6 5.0 5.0 ECA1EM471( ) 200 500 1000 10 20 850 0.16 0.6 5.0 5.0 ECA1EM102( ) 200 500 25 2200 12.5 25 1200 0.18 0.6 5.0 5.0 ECA1EM222( ) 200 500 3300 16 25 1300 0.20 0.8 7.5 7.5 ECA1EM332( ) 100 250 4700 16 31.5 1500 0.22 0.8 7.5 ECA1EM472 100 6800 18 35.5 1750 0.26 0.8 7.5 ECA1EM682 50 When requesting taped product, please put the letter B or i between the ( ). Lead wire pitch B=5 mm, 7.5 mm, i=2.5 mm. Please refer to the page of Taping dimensions. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016